Answer:
The Second Law
Explanation:
How do the force factors compare to the products of the masses?
Answer:
The force factors are equal to the first numbers of the products of the masses in scientific notation.
Explanation:
Ex. 1.0 x 10^5 kg^2 then the force factor would be 1.
ex. 3.0 x 10^12 kg^2 then the force factor would be 3.
To solve this we must be knowing each and every concept related to scientific notation and its calculations. Therefore, in scientific notation, the force factors seem to be equivalent to the first digits of the masses' products.
What is scientific notation?Mathematics is a way of representing numbers using a decimal number ranging from one to 10, but not 10 multiplied by a factor of 10. The most common type of mathematical notation is All numbers in scientific notation are expressed in the generic form N 10m.
In scientific notation, the force factors seem to be equivalent to the first digits of the masses' products.
Example1 1.0 x 10⁵ kg² , force factor is 1.
Example2 3.0 x 10¹² kg² ,force factor is 3.
Therefore, in scientific notation, the force factors seem to be equivalent to the first digits of the masses' products.
To learn more about scientific notation, here:
https://brainly.com/question/18073768
#SPJ2
Please help me vote you brainiest
Answer: D
Explanation: P = W/t
W = F d
When dividing, if you have a large number over a small, you get a large number. We want a small number, so we want the opposite for our P : W/ t formula. We want a small Work and a large time.
Right off the bat, the two with the least time aren't right then.
From there, we can estimate how much work it would take using the W = F d equation. If there is a small distance, there is less work, which is what we want to achieve a small work over large time.
So, the choice with the most time and the least distance should be correct.
1. What net ionic equation describes the reaction between Pb(NO3)2( aq) and N a2CO3( aq) ?
O 2Na t( aq) + N0, 2( aq) → 2NaNO3( s)
O Pb 2+( aq) + 2Na t( aq) → 2NaPb( s)
O Pb 2+( aq) + CO3( aq) → PBCO3( s)
O 2Na t( aq) + CO3 2( aq) → NacO3( s)
Answer: C. Pb^2+(aq) + CO3^-2(aq) —> PbCO3(s)
Explanation:
can i have some help :'(
manganese atom has 30 neutrons and atomic number 25
calculate the atomic mass of manganese atom
The atomic mass of manganese atom : 55
Further explanationGiven
Manganese (Mn) atom has 30 neutrons
atomic number 25
Required
the atomic mass
Solution
The atomic mass=number of protons+number of neutrons
The atomic number = number of protons=number of electrons
The number of protons=25, so the atomic mass :
[tex]\tt =ptotons+neutrons\\\\=25+30\\\\=55[/tex]
What is the similarity between teeth and eggshells?
Explanation:
Because they share a similar composition, similar chemicals affect their structures in positive or negative ways. For example, fluoride – a staple in many dental practices – strengthens both enamel and eggshells and helps protect them from acids. Acids weaken and break down both substances. Scientists find this particularly concerning given that the ocean is growing increasingly acidic. They fear this may weaken the eggs of some marine species and harm their chance of survival. Most dentists recommend limiting aggressively acidic foods and beverages such as soft drinks.
what is the mass of H2o required to dissolve 14.5g of glucose
if the molality of solution is 0.24 molal
Answer:
Mass of water = 0.33 Kg
Explanation:
Given data:
Mass of water = ?
Mass of glucose = 14.5 g
molality of solution = 0.24 m
Solution:
Number of moles of glucose:
Number of moles = mass/molar mass
Number of moles = 14.5 g/ 180.156 g/mol
Number of moles = 0.08 mol
Mass of water:
Molality = number of moles of solute / Kg of solvent
0.24 m = 0.08 mol / Kg of solvent
Kg of solvent = 0.08 mol / 0.24 m
Kg of solvent = 0.33 Kg
Part of an important cellular process involving a DNA strand is modeled below
12000
What is the purpose of this cellular process?
F Preserving genetic information for future generations
G Deleting the information in the sequence produced from the DNA template
# Transcribing information in the DNA sequence for use by the cell
J Producing more nucleotides for the DNA sequence
Answer: transcribing information to the dna sequence for use by the cell
Explanation:
A giraffe is found in the African grasslands. Is this an example of a habitat or a niche
Answer:
Niche i think
Explanation:
90% of people marry there 7th grade love. since u have read this, u will be told good news tonight. if u don't pass this on nine comments your worst week starts now this isn't fake. apparently if u copy and paste this on ten comments in the next ten minutes you will have the best day of your life tomorrow. you will either get kissed or asked out in the next 53 minutes someone will say i love you
I JUST NEED HELP!!!!
Which group or groups of atoms are the only atoms with f orbitals?
Question 10 options:
A)
All noble gases
B)
All atoms heavier than barium (Ba)
C)
All atoms heavier than krypton (Kr)
D)
Lanthanides and actinides
Answer:
D ( I am probably wrong)
Explanation:
Answer:
All atoms heavier than barium (Ba)
arium has completely filled 5d orbitals and 6s orbitals. After barium, the lanthanide elements occur, in which inner shell 4f-orbitals are filled. So all atoms heavier than Ba possess f-orbitals.
Explanation:
Hello Hi so um... I don't know what to say so um... yeah MOLLOC WAS HERE!!!!!!!!!!!!!!!!
Answer:
hi nice to meet you, just be your self and ask your questions, its all good we are nice people
Explanation:
have a great day, please mark as brainliest please
Hello! Be ur self, ask questions and ask questions. Okibye
Are scientist improving the plant or corrupting it
Answer:
46 percent of trees have been cut down.
Scienctists helps plants, but humans do destroy a lot of plants.
Scientists - helps increase plant growth.
Woodchoppers - helps decrease plant growth.
if there are 365 grams of NaCl, how many grams of sodium are there?
Answer: Molar mass is the amount grams that one mole weighs.
Explanation: You need to find the molar mass of NaCl which is the same as the amu on the periodic table in grams. So it is 22.99(Na) + 35.45(Cl) = 58.44
You also know that for every mole of NaCl you have 1 mole of Na because every molecule of NaCl has 1 atom of Na.
Finally, using the periodic table, again, you see that the molar mass of Na is 22.99.
Then using stoichiometry, you can find the grams of sodium.
100(g NaCl) * 1 mol (NaCl)/58.44 g (NaCl) * 1 mol (Na)/ 1 mol (NaCl) * 22.99 (g of Na)/ 1 mol (Na)
which equals 39.339435 g of Na.
If you need to maintain significant figures the answer will be 40.
bigger size elements have low ionization energy and high shielding effect .justify the statement
Bigger size elements have low ionization energy and high shielding effect because:
Shielding effect:This effect describes the decrease in attraction between an electron and the nucleus in any atom with more than one electron shell. The more electron shells there are, the greater the shielding effect experienced by the outermost electrons.When shielding effect decreases the attraction force exerted by the nucleus increases on valence electrons.As a result, atoms will be larger.Find more information about Shielding effect here:
brainly.com/question/26366780
"Indicate in each whether the following electron configurations correspond to an atom in its ground state, excited state, or is impossible."
a. [tex]{1s}^{2} {2s}^{2} {2p}^{4} [/tex]
b. [tex] {1s}^{2} {2s}^{2} {2p}^{3} {2d}^{1} [/tex]
c. [tex] {1s}^{2} {2s}^{2} {2p}^{3}{3s}^{1} [/tex]
d. [tex] {1s}^{2} {2s}^{1} {2p}^{2} [/tex]
e. [tex] {1s}^{2} {2s}^{2} {2p}^{1} [/tex]
f. [tex] {1s}^{2} {2s}^{3} [/tex]
Please, I really need help. I don't know what to do...
Answer:
Explanation:
Firstly, let's define what ground and excited state electronic configuration.
Ground state electronic configuration is when the electrons of the atom are in there lowest possible energy level while excited state electronic configuration is when electron(s) have moved to a higher energy level. Examples of these are provided in the options
a. 1s²2s²2p⁴ - This is a ground state electronic configuration (of oxygen) because the electrons are in there lowest possible energy level.
b. This option is not displaying (it is displaying something like an image that isn't loading)
c. 1s²2s²2p³3s¹ - We can see from this that an electron jumped from 2p energy level to 3s (p energy level ought to be completely filled with 6 electrons before another electron moves to the next energy level) meaning the electron is in it's excited state thus this is an excited state electronic configuration (of oxygen).
d. 1s²2s¹2p² - We can see from this also that an electron jumped from the 2s energy level to the 2p energy level (making it 2p² instead of 2p¹ in the ground state). The 2s energy level should ordinarily have 2 electrons. Thus, this is an excited state electronic configuration (of boron).
e. 1s²2s²sp¹ - This is a ground state electronic configuration (of boron) since all the electrons are in there lowest possible energy level.
f. 1s²2s³ - This configuration is impossible because the s energy level should only contain a maximum of 2 electrons, thus impossible to have 3 electrons in the s energy level
how is wind energy captured?
where is wind energy found?
how is water energy captured?
where is water energy found?
plz use the passage i put. plz and thank you!!!!!
How many atoms are in HCOOH₂?
Answer:
11 atoms I think
Explanation:
Answer: 3
Explanation:
I took the test!!
You discovered a new compound with the following name: Feline (II) Canide. Based on the information below, what would be the correct formula for this compound?
*Canine is a halogen
*Feline has the following symbol: Fi
*Canine has the following symbol: Ci
*Answer choices*
*Fi2Ci3
*FiCi2
*CiFi
*Fi2Ci
Answer:
FiCi2
Explanation:
In relation of Iron(ii) chloride, FeCl2
In this reaction, how does the rate of forward reaction vary with the concentration of the product?
2H2S(g) ⇌ 2H2(g) + S2(g)
It increases with an increase in the concentration of S2(g).
It decreases with a decrease in the concentration of H2(g).
It increases with a decrease in the concentration of H2(g).
It decreases with an increase in the concentration of S2(g).
It decreases with increase in the concentration of H2(g).
Answer:
c d e
Explanation:
Answer:
C D E
Explanation:
#platogang
PLS HELP How many moles of methane are in 7.31x10^25 molecules
Answer:
121.37 moles
Explanation:
I'm not sure
Answer:
1.21 x 10^2
Explanation:
The three types of ocean floor sediments are classified according to their _____.
Answer:
Origin
Explanation:
What are some ways that propane, butane, gasoline, diesel, and kerosene can be compared?
Answer:
Propane and butane are pure substances, which means that each one of them is made of only one type of molecule—propane molecules or butane molecules. In contrast, gasoline, diesel, and kerosene are not pure substances; they are mixtures of more than one substance.
Explanation:
Hope it is helpful...
Propane, butane, gasoline, diesel and kerosene are all hydrocarbons. They can be produced from petroleum. All these are used as fuels.
What are hydrocarbons ?Hydrocarbons are organic compounds containing C-C backbone and C-H bonds, These compounds are composed of carbons and hydrogens. Different function groups can be added to the hydrocarbons to form various organic compounds such as acids, esters , aldehydes, ketones etc.
Methane is the first hydrocarbon in the hierarchy based on number of carbons. Propane is third in this series since it contains 3 carbons and butane is 4th one. Gasoline, diesel and kerosene are all hydrocarbons with different carbon numbers.
All these are obtained as a byproduct of petroleum. These are used as fuel in vehicles and house holds. The difference in them is the number of carbon and hydrogen.
Find more on hydrocarbons:
https://brainly.com/question/12433190
#SPJ2
which is a greater threat to a mountain ecosystem: a beetle that kills coniferous trees or a wolf thats hunts and eats deer?
Answer:
Explanation:
The mountain ecosystems are characterized by coniferous tree species such as pinus, firs, and spruces and species such as deers, bears, and wolves.
A beetle that kills coniferous trees would be a greater threat to the ecosystem than a wolf that hunts and eat deer because the dominant trees in the ecosystem are conifers. Hence, a beetle that kills coniferous trees might end up killing the dominant tree species in the ecosystem and this will gravely affect other plant and animal species within the ecosystem.
Wolves and deers have their niche in the mountain ecosystem already and hence, their populations are naturally limited by limiting factors of the environment. Hence, a wolf that hunts and eats deers would be of a lesser threat to the mountain ecosystem.
* The cost of table salt and table sugar is Rs 15 per kg.
and Rs 69 per kg respectively calculate their cost per mole?
Cost per mole
Table salt : Rs 0.878
Table sugar : Rs 23.63
Further explanationGiven
Cost table salt (NaCl) = 15/kg
Cost table sugar(sucrose-C12H22O11) = 69/kg
Required
cost per mole
Solution
mol of 1 kg Table salt(NaCl ,MW= 58.5 g/mol) :
[tex]\tt mol=\dfrac{1000~g}{58.5}=17.09~mol=Rs~15\rightarrow 1~mol=Rs~0.878[/tex]
mol of 1 kg Table sugar(C12H22O11 ,MW= 342 g/mol) :
[tex]\tt mol=\dfrac{1000}{342}=2.92~mol=Rs~69\rightarrow 1~mol=Rs~23.63[/tex]
It takes 7.21 1019 J of energy to remove an electron from an iron atom. What is the maximum wavelength of light that can do this
Answer:
2.75 × 10^-45 m
Explanation:
From;
E= hc/wavelength
h= Plank's constant= 6.6 × 10^-34 Js
c= speed of light=3× 10^8 ms-1
Wavelength = 6.6 × 10^-34 × 3× 10^8/7.21 × 10^19
Wavelength= 2.75 × 10^-45 m
Calculate the number of atoms in 2.8 moles of silicon atoms
Answer:
1.686 × 10²⁴ atomsExplanation:
The number of silicon atoms can be found by using the formula
N = n × Lwhere n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
N = 2.8 × 6.02 × 10²³
We have the final answer as
1.686 × 10²⁴ silicon atomsHope this helps you
What would happen if a neutron was added to Lithium (7)
Answer:
if you add a neutron to lithium-7 it becomes a compound nucleus of lithium-8
How many moles of NaOH must be dissolved in 1.00 L of water to make NaOH (aq) with a pH of 12.2?
Answer:
1.58 102 mol
Explanation:
I just looked it up on Quizlet.
1.58 102 moles of NaOH must be dissolved in 1.00 L of water to make NaOH (aq) with a pH of 12.2.
How many moles are present in NaOH?One mole of any substance weighs about the same as the molecular mass of that substance. Hence, the number of moles of sodium hydroxide contained in 160 g of it is 4 moles.
How do I calculate moles?Number Of Moles Formula
1 The formula for the number of moles formula is expressed as.
Given.
2 The number of moles formula is.
3 The number of moles = Mass of substance / Mass of one mole.
4 Number of moles = 95 / 86.94.
Learn more about moles of NaOH at
https://brainly.in/question/119958
#SPJ2
7. Some products or processes claim to be "chemical free" or say "no chemicals added." Based on your understanding of chemistry, what are the arguments for and against such statements?
Please i need help
The meaning behind the statement is that the products does not contains any synthetic and harmful chemicals such as colourants, preservatives etc.
What are synthetic chemicals?All natural products or materials contains certain kind of chemicals which are naturally made in them. Such chemicals are natural chemicals and does not harm the living or causes any unwanted reaction.
The chemicals which are made by humans for specific purposes are called synthetic chemicals. Which can be of toxic and hazardous. Almost all materials we use everyday such as toothpastes, shampoo, food items, dyes, medicines and the fertilizers and pesticides we use in agriculture are all chemicals.
These chemicals helps in some way but they can be harmful to life in other way. Some products claim that they are chemical free, may true or not they intending to clear that the product does not contain any synthetic chemical except the required natural chemicals.
To find more about synthetic chemicals, refer the link below:
https://brainly.com/question/19938248
#SPJ2
help please
manganese atom has 30 neutrons and atomic number 25
determine the electron cloud charge of manganese
Answer:
electron cloud charge of manganese=-5
Explanation:
atomic number=number of elecron +neutron number
DATA
Neutron NO.=30
atomic NO.=25
e=?
A=e+n
25=e+30
e=25-30
e= -5
dicarbon heptasulfide chemical formula
Answer:
C2S7
Explanation:
To solve this we must be knowing each and every concept related to chemical formula. Therefore, the chemical formula for the given molecule dicarbon hepta sulfide is C[tex]_2[/tex]S[tex]_7[/tex].
What is chemical formula?A chemical formula is a scientific notation that uses atomic symbol and numerical subscripts to represent the number and types of elements contained in a molecule. A chemical formula seems to be a concise written description of an existing three-dimensional molecule.
A chemical formula characterizes a material to the atomic level. There are three sorts of chemical formulas: empirical, molecular, and structural. The chemical formula for the given molecule dicarbon hepta sulfide is C[tex]_2[/tex]S[tex]_7[/tex].
Therefore, the chemical formula for the given molecule dicarbon hepta sulfide is C[tex]_2[/tex]S[tex]_7[/tex].
To know more about chemical formula, here:
https://brainly.com/question/29031056
#SPJ2