Answer: A balanced chemical reaction is A balanced chemical equation where the number of atoms of each type in the response is the same on both reactants and product sides.
Explanation: Burning, and cooking are 2 examples.
As long as proper
safety precautions have been taken, why can explosives be transported long distances without exploding?
Which of the following best represents the structure of an amino acid in basic solution (pH = 11)?
Answer:
Explanation:
In basic solution (pH = 11), an amino acid typically exists in its zwitterionic form. This means that the amino acid has both a positive and a negative charge, due to the presence of both a basic amino group (-NH2) and an acidic carboxyl group (-COOH).
The structure of an amino acid in basic solution (pH = 11) can be represented as follows:
The central carbon atom (also known as the alpha carbon) is bonded to a hydrogen atom, an amino group (-NH2), a carboxyl group (-COOH), and a side chain R group.
The amino group is positively charged due to the loss of a proton (H+).
The carboxyl group is negatively charged due to the gain of a proton (H+).
Overall, the amino acid has a net charge of zero, due to the equal and opposite charges of the amino and carboxyl groups. This is known as the zwitterionic form of the amino acid.
Here is a visual representation of the structure of an amino acid in basic solution (pH = 11):
H |
N-C-COOH
|
R
Regenerate response
How is the rock in the deep mantle similar to the rock in the parts of the mantle nearest to the surface? How are they different?
They are distinct Similarity: Compared to crustal rocks, mantle rocks have higher concentrations of magnesium and iron. The deep mantle's rocks are under extreme pressure and heat.
A mantle is what?Earth's interior is made up primarily of the mantle, which is solid. Between the thin crust at the surface of the planet and its dense, extremely hot core is the mantle. A staggering 84% of the volume of the Earth is made up of the mantle, which is around 2,900 kilometers 1,802 miles thick.
The mantle layer is how thick?The thickest layer on Earth measures just under 3,000 kilometers 1,865 miles. The beginning is only 18.6 miles 30 kilometers below the surface. It is thick, heated, and semi-solid like caramel candy, mostly made of iron, magnesium, and silicon. It circulates, much like the layer beneath it.
To know more about mantle visit:
https://brainly.com/question/11096614
#SPJ1
No Constant Variable
A 2.00L sample of gas at STP is heated to 500K and compressed to 200 kPa. What is
the new volume of the gas?
I’ll give you all my points
The new volume of the gas will be 1.85L.
The three gas laws are what?According to Boyle's Law, as pressure lowers, gas volume grows. According to Charles' Law, when the temperature rises, the volume of the gas also rises. Avogadro's Law also states that as the amount of gas increases, so does the volume of the gas.
Given, initial volume of gas V1 = 2L
initial temp T1 = 273K
initial pressure P1 = 101.3 kPa
final temperature, T2 = 500K
Final pressure, P2 = 200 kPa
let final or new volume be V,
now for a constant moles of gas,
by using ideal gas equation,
P1×V1/T1 = P2×V/T2
101.3×2/273 = 200×V/500
202.6/273 = 2V/5
V = 0.742×5/2
V = 1.85 L
The new volume of the gas will be 1.85L.
To know more about Gas laws visit
https://brainly.com/question/12669509
#SPJ1
Give two ways a globe is like the earth and two ways a globe is not like the earth.
Its a homework question and I'm to lazy to think HELP PLEASE
Answer:
A glove is like the earth because...
A globe is like the earth in that it is a three-dimensional representation of the earth's features, such as countries, oceans, and landmasses.
A globe is also like the earth in that it can rotate on its axis, which allows the viewer to see different parts of the earth depending on the angle of rotation.
A globe is not like the earth because...
A globe is not like the earth in that it is typically much smaller than the earth.
A globe is also not like the earth in that it does not depict the earth's relief features, such as mountains and valleys, in their true proportion to the rest of the earth's surface.
A globe is like the earth in that it is a scaled-down, spherical model of the earth's surface, representing physical features accurately. However, a globe is not like the earth because it is much smaller and does not rotate or revolve.
Explanation:The globe and the earth are similar in two main ways. First, a globe is a scaled-down model of the earth, showing an accurate representation of the earth's surface. This includes physical features such as continents, oceans, and countries, which are mapped out precisely. Second, a globe is spherical, just like the earth.
However, there are differences between a globe and the earth. One key difference is the scale: the earth is far larger than any globe. The most obvious point of difference is the size: while a globe is small enough to be held in your hands or placed on a desk, the earth has a diameter of approximately 7,917.5 miles. Also, the globe is a static object, it does not rotate on its axis or revolve around the sun like the earth does.
Learn more about Globe and Earth here:https://brainly.com/question/13254506
#SPJ2
A chemist has one solution that is 30.% acid and another solution that is 18% acid. How much of each solution should be used to get 300. L of a solution that is 21% acid?
a. 23 L of the 30.% solution and 277 L of the 18% solution
b. 75 L of the 30.% solution and 225 L of the 18% solution
c. 131 L of the 30.% solution and 169 L of the 18% solution
d. 138 L of the 30.% solution and 162 L of the 18% solution
e. 244 L of the 30.% solution and 56 L of the 18% solution
There is a golden rule of solubility, non polar solute dissolve in non polar solvent and polar solute dissolve in polar solvent. Therefore, the correct option is option B.
What is solution?
Solution is a homogeneous mixture of two or more than two substances. A solution is a homogeneous mixture of solute and solvent molecules. Solvent is a substance that is in large amount in solution. solute is the substance which is in small amount in a solution.
There are two types of mixture that is homogeneous and heterogeneous. Solution is a homogeneous solution. The nature of solvent tells about whether the solvent is in liquid, solid or gas form.
Let amount of 30% to mix, be X
Then amount of 18% to mix = 300 - X
0.3X + 0.18(300 - X) = 0.21(300)
0.3X+ 0.18(300) - 0.18X= 0.21(300)
0.3X - 0.18X =0 .21(300) -0 .18(300)
0.12X =0 .03(300)
X=75L
Therefore, the correct option is option B.
To know more about solution, here:
https://brainly.com/question/13812915
#SPJ1
2. A small block of a metal with a mass of 223.1 grams when
submerged in a beaker containing water, the water level rises to
150.0 mL as shown in the figure here. If the density of the metal
block is 7.41 g/cm³ at 22°C, then what was the original water level
in the beaker?
Water leve
150 mL
The volume of the metal block can be calculated using the density and mass of the block is 30.0 cm³
What is metal block?A metal block is a solid piece of metal that is typically used for machining and other industrial applications. It is usually made from aluminum, steel, or other metals, and can be machined into a variety of shapes and sizes depending on the application. Metal blocks are also used for casting, forging, and other manufacturing processes. Metal blocks may also be used for decorative purposes, such as sculpture or engraving. They are also used in jewelry making and engraving, as well as in medical and dental applications.
The volume of the metal block can be calculated using the density and mass of the block:
Volume = Mass/Density = 223.1 g/7.41 g/cm³ = 30.0 cm³
Since the metal block was submerged in the water, the volume of the block will be added to the volume of water in the beaker. Therefore, the original water level in the beaker can be calculated using the following equation:
Original Water Level = 150 mL + (30.0 cm³/1000 cm³/mL) = 180.0 mL
To learn more about metal block
https://brainly.com/question/30142110
#SPJ1
The mass of copper nitrate produced from reacting 3.65g of copper and 5.16g of nitric acid
The mass of copper nitrate produced in the reaction 3.65g of copper and 5.16g of nitric acid is 3.84g.
What gas is produced when copper combines with nitric acid?Nitric acid reacts with copper
4 HNO3(l) + Cu(s) ==> Cu(NO3)2(s and aq) + 2 NO2(g) + 2 H2O(l)
Deep blue colour characterises the copper nitrate salt that develops. Nitrogen dioxide is the gas that is created when strong nitric acid and copper interact. This maroon mist is nitrogen dioxide.
Copper :
=> mass copper nitrate
=> 3.65g Cu x 1mol of Cu/63.546 g Cu x 1 mol copper nitrate / 1 mol cu x 187.56 g/mol copper nitrate
=> 10.77g
HNO3 (Nitric acid):
=> Mass copper nitrate =3.65 g HNO3 X 1 mol HNO3/63.546 g HNO3 x 1mol of copper nitrate /4 mol HNO3 x 187.56 g/mol copper nitrate.
=> 3.84g.
Learn more about copper nitrate here:
brainly.com/question/29402119
#SPJ1
a) S₂08²+ I- ----> I3- + SO₂ The reaction is carried out in a basic solution. Express a balanced redox equation using the ion-electron method.
Answer:
The ion-electron method involves breaking the reactants into their component ions and transferring electrons between the ions to balance the charge and the atoms. In a basic solution, the S²⁰⁸² ion will gain two electrons to form SO₂. The I¹⁻ ion will lose one electron to form I³⁻. The balanced redox equation using the ion-electron method is:
S²⁰⁸² + 2e⁻ + 2OH⁻ → SO₂ + H₂O
I¹⁻ + e⁻ → I³⁻
The overall balanced equation is:
2S²⁰⁸² + 2OH⁻ + I¹⁻ → 2I³⁻ + SO₂ + H₂O
At which of the following temperatures is the average kinetic energy of molecules od a substance greatest
Answer:
Correct option is C)
Kinetic Energy at 20
o
C=293K
=3/2K
B
T=3/2K
B
(293)J=K.E
1
kE
2
=2K.E
1
2
2
3
K
^
B
(293)=
2
3
K
^
B
T
T=586K
=313
o
C
Chemicals released into the air from human activity, such as sulfur dioxide and nitrous oxide, interact with the atmosphere to make acid rain.
in which atmosphere layer does this process happen?
A, thermosphere
B, mesosphere
C, troposphere
D, stratosphere
I NEED HELP ASAP!!!!!!
Troposphere atmosphere layer does this process happen The acidity of rainwater comes from the natural presence of three substances (CO2, NO, and SO2) found in the troposphere
What is troposphere?The lowest part of Earth's atmosphere is called the troposphere. The troposphere contains the majority of the mass of the atmosphere (about 75–80%). The troposphere is where most clouds of all varieties may be found, and this is also where most weather takes place.The lowest portion of our atmosphere is called the troposphere. It begins below the surface and rises to a height of roughly 10 kilometers (6.2 miles, or about 33,000 feet) above sea level. The troposphere, where we are located, is the lowest layer where most weather happens.Most weather occurrences occur in the troposphere, which is the first and lowest layer of the Earth's atmosphere. It includes 99% of the planet's water vapour and aerosol mass and 75% of the total mass of the planetary atmosphere.To learn more about troposphere refers to:
brainly.com/question/30126863
#SPJ1
Find the number of moles of oxygen atoms in 3.00 mol of copper(II) sulphate pentahydrate.
Answer:
9 times Avogadro's number, because there are a total of 9 oxygen atoms in the copper sulfate hydrate being considered: 4 from the sulfate
Explanation:
What effect does light have on the growth of plants?
Select all that apply.
Light does not have any effect on a plant’s growth.
Light makes a plant’s stem grow shorter.
Light makes a plant’s leaves turn brown.
Light will make a plant’s leaves grow bigger.
Answer:
The answer is the last one only.
Explanation:
Light/sun gives energy and growth which makes the plants leaves/plant grow bigger.
Explanation:
Without the sun, plants wouldn't get the food that's needed to grow, reproduce and survive. plants need sunlight, water and carbon dioxide to live.
Explain how an incorrect of dietary information on high blood sugar could potentially affect the patient’s
Long-term (months or years) high blood sugar levels can cause irreversible harm to organs such the kidneys, blood vessels, eyes, nerves, and nervous system. Speak with your doctor or the diabetes care team if you frequently have hyperglycemia.
What effects could an extremely high blood sugar level have on us?If left untreated, having excessive blood sugar levels for an extended length of time might lead to major health issues. In addition to raising the risk of heart disease, stroke, kidney illness, vision issues, and nerve issues, hyperglycemia can harm the blood arteries that provide blood to essential organs.
What dietary requirements are impacted by diabetes?A high-fat, high-calorie, and high-cholesterol diet
To know more about high blood sugar visit:-
https://brainly.com/question/29749982
#SPJ1
When compared to the keto form, the enol form of which of the following compounds is most stable?
1
II
III
IV
V
Which compound's? H is the least acidic?
nitroethane
propanenitrile
propanal
N,N-dimethylacetamide
acetone
Rank the compounds from strongest acids to weakest. To rank items as equivalent, overlap them.
To solve this we must be knowing each and every concept related to tautomerization. Therefore, out of keto and enol form, keto form is mot stable.
What is tautomerization?Tautomers are two structural isomers that are readily inconvertible and vary in the relative locations of their atoms while being in dynamic equilibrium. Tautomers essentially function as structural isomers.
Tautomerization is the term used to describe the tautomerization phenomena. Tautomerization includes the exchange of protons and electrons between molecules. Out of keto and enol form, keto form is mot stable.
Therefore, out of keto and enol form, keto form is mot stable.
To learn more about tautomerization, here:
https://brainly.com/question/15411301
#SPJ1
are these reactions balanced or unbalanced ?
Depression in freezing point of non-electrolyte solution containing 29.5 g of a substance in 100 g of water is 1.6 K. Determine the molar weight of the substance. (Cryometry).
The depression in freezing point of the electrolyte is 1.6 K. The weight of the solute added is 29.5 g. Then the molar mass of the compound is obtained to be 342.93 g/mol.
What is depression in freezing point?Addition of a non-volatile solute into a solvent decreases the freezing point of the solution. The depression in freezing point is calculated as follows:
ΔT = W₂ 1000 Kf / (M W₁)
where W₂ be the mass of solute and W₁ is that of solvent, Kf is called molal depression constant. M be the molar mass of the solute.
Given ΔT = 1.6 K
W₂ = 29.5 g
W₁ = 100 g
Kf of water = 1.86 K/m
Then M = W₂ 1000 Kf / ( ΔT W₁)
M = 29.5 g× 1000 × 1.86 / (1.6 K × 100 g) = 342.9 g/mol
Thus, the molar mass of the solute is 342.9 g/mol.
Find more on depression in freezing point:
https://brainly.com/question/12844810
#SPJ1
what is the number of moles of water in 100 g of vinegar?
Answer:
The number of moles of water in 100 g of vinegar is 0.47 moles.
Explanation:
what mechanism of formation of magma is represented by the experiment.justify your answer
need Kona Po please
Explanation:
This hot material rises to an area of lower pressure through the process of convection. Areas of lower pressure always have a lower melting point than areas of high pressure. This reduction in overlying pressure, or decompression, enables the mantle rock to melt and form magma.
If you react 35.1g of calcium 37.1g of oxygen.
Which is limiting reactant and how much product can be made
The limiting reactant would be calcium and the amount of product that can be made would be 7.14 grams.
Stoichiometic problemCalcium reacts with oxygen to form calcium oxide according to the following balanced equation:
[tex]2Ca + O_2 --- > 2CaO[/tex]
In other words, the mole ratio of Ca to O is 2:1.
Mole of 35.1 g Ca = 35.1/40 = 0.1275
Mole of 37.1 g O = 37.1/16 = 2.3188
This means that oxygen is in excess while Ca is the limiting reagent.
The mole ratio of Ca to CaO is 1:1, thus the equivalent amount of CaO that will be produced will also be 0.1275 moles.
Mass of 0.1275 moles CaO = 0.1275 x 56 = 7.14 grams
In other words, the limiting reactant of the reaction is calcium while the amount of the product that can be made is 7.14 grams.
More on stoichiometric problems can be found here: https://brainly.com/question/29856106
#SPJ1
PLEASE HELP! 80 POINTS
Create a VESPR drawing for
NH3
CH20
N3
SO2CI2
BrF5
The VSEPR drawing for the compounds in the question are shown in the images attached.
What is the VSEPR theory?We have to know that according to the valence shell electron pair repulsion theory, the structure of the molecule can be found by looking at the number of electron pairs that surround the central atom in the molecule.
Now the structure of the compounds as we can see in the images that ahve been attached are based on the Vlence Shell electron pair repulsion drawing for each of the compounds that we have mentioned in the question.
We can see that the structure of the compound must have a central atom and then the other atoms in the molecule are arranged around the central atom of the molecule.
The molecule would have a definite shape that is based on the number of electron shells in the molecule.
Learn more about molecule:https://brainly.com/question/19922822
#SPJ1
if 3.38g of CuNO3 IS DISSOLVED IN WATER TO MAKE 0.220 M solution what is the volume of the solution in milliliters"
Answer:
To determine the volume of the solution in milliliters, we need to know the mass of CuNO3 and the concentration of the solution.
Given that 3.38g of CuNO3 is dissolved in water to make a 0.220 M solution, we can use the following formula to calculate the volume of the solution:
Volume = (Mass of CuNO3) / (Concentration of solution)
Plugging in the given values, we have:
Volume = (3.38 g) / (0.220 M)
Converting the mass to grams and the concentration to moles/liter, we have:
Volume = (3.38 g) / (0.220 mol/L)
Calculating, we find that the volume of the solution is approximately 15.36 liters.
To convert the volume to milliliters, we can multiply the volume in liters by 1000. In this case, the volume in milliliters is 15,360 ml.
Therefore, the volume of the solution in milliliters is approximately 15,360 ml.
Explanation:
Please help me fill in the blanks
Sublevels are indicated by letters s, p, d, and f.
How do write Electronic configuration?
Electron configurations have a standard notation that tells you the principle energy levels and sublevels that electrons occupy. here is Sulphur:
The atomic number of Sulphur is 16.
the electronic configuration of Sulphur is 1s2 2s2 2p6 3s2 3p4.
The 4s sublevel has lower energy than the 3d sublevel,
so, it fills next.
Which four different electron configurations are there?One orbital can house a maximum of two electrons, and there are four different types of orbitals (s, p, d, and f). More electrons can be held in the p, d, and f orbitals since they contain various sublevels. According to its location on the periodic table, each element's electron configuration is distinct.
To know more electron confirguration here:
brainly.com/question/18566828
#SPJ1
use the kinetic particle model to describe the motion and separation of the particles in solid carbon dioxide and carbon dioxide gas
In solid carbon dioxide (dry ice), the particles are held together by strong covalent bonds, so they do not move around much.
What is the carbon dioxide?
Carbon dioxide (CO2) is an odorless, colorless gas created through natural processes such as respiration, combustion and the breakdown of organic materials. As a greenhouse gas, it is a major component of the Earth’s atmosphere and plays a critical role in regulating the global climate. Carbon dioxide is made up of one carbon atom and two oxygen atoms, and is produced when fossil fuels such as coal and oil are burned. Plants and trees also use carbon dioxide as part of their photosynthesis process. Carbon dioxide is essential for life on Earth, however, too much of it can have a negative impact on our planet. As human activity has increased over the past century, so too has our production of CO2, resulting in higher concentrations of this gas in the atmosphere and contributing to global warming.
To learn more about carbon dioxide
https://brainly.com/question/25385913
#SPJ1
Calculate the mass of compound (molar mass = 256 g [tex] mol {}^{-1} [/tex] ) to be dissolved in 75g of benzene to lower its freezing point by 0.48K
( [tex]K _{f} = 5.12 \: K \: \: kg \: mol { }^{ - 1} [/tex] )
thankyou.
The mass of the compound is calculated by freezing point depression formula which is ΔTf=Kf×W₂×1000/M₂×W₁ which is equal to 3125 g.
What is a compound?Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.
Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.
Freezing point depression is calculated by the formula, ΔTf=Kf×W₂×1000/M₂×W₁ .Therefore,W₁=5.12×75×1000/0.48×256=3125 g.
Thus, mass of compound is 3125 g.
Learn more about compound,here:
https://brainly.com/question/13516179
#SPJ1
What is the molecular weight of (NH4)2SO4
The molecular weight of [tex](NH_4)_2SO_4[/tex] would be 132 g/mol.
Calculation of molecular weightsThe molecular weight, otherwise known as the molar mass of substances is the sum of the molar weights of individual atoms that make up the substance.
[tex](NH_4)_2SO_4[/tex] is made up of 2 atoms of N, 8 atoms of H, 1 atom of S, and 4 atoms of O.
Molar weight of N is 14 g/molMolar weight of H is 1 g/molMolar weight of S is 32 g/molMolar weight of O is 16 g/molThus, the molecular weight of [tex](NH_4)_2SO_4[/tex] = (14x2) + (1x8) + 32 + (16x4)
= 132 g/mol
In other words, the molecular weight of [tex](NH_4)_2SO_4[/tex] is 132 g/mol.
More on molecular weights can be found here: https://brainly.com/question/14507491
#SPJ1
I want to know how to solve this question by step by step.
Question: What is the pH value of 500ml of an aqueous solution of 0.005 mol HCl ?
The pH value of 500 mL of an aqueous solution of 0.005 mole HCl is 2
How do I determine the pH of the solution?We'll begin our calculations by obtaining the molarity of the solution. Details below:
Volume of solution = 500 mL = 500 / 1000 = 0.50 LMole of HCl = 0.005 moleMolarity = ?Molarity = mole / volume
Molarity = 0.005 / 0.50
Molarity = 0.01 M
Next, we shall obtain the concentration of the hydrogen ion, H⁺ in the solution. Details below:
HCl(aq) <=> H⁺(aq) + Cl¯(aq)
From the balanced equation above,
1 mole of HCl contains 1 mole of H⁺
Therefore,
0.01 M HCl will also contain 0.01 M H⁺
Thus, the concentration of the hydrogen ion, H⁺ in the solution is 0.01 M
Finally, we shall determine the pH of the solution. Details below:
Concentration of hydrogen ion [H⁺] = 0.01 MpH of solution =?pH = -Log H⁺
pH = -Log 0.01
pH = 2
Thus, we can conclude that the pH of the solution is 2
Learn more about pH:
https://brainly.com/question/22983829
#SPJ1
How to solve this problem? I am stuck
The functional group of molecules as follows :
Molecule 1. is aldehyde and ketone, Molecule 2 is acid and thio, Molecule 3 is acid and amide, Molecule 4 is alcohol and ether, Molecule 5 is Alcohol and acid. The image attached below show the functional group and molecules are labeled.
What is polar compound ?The polar compounds are those compound having different positive and negative charge, therefore the bonding with atoms such as nitrogen, oxygen, or sulfur.
A buffer is a solution the can control the pH change along with the addition of an acidic or basic substance. It is able to neutralize small amounts of added acid or base, So it maintains the pH of the solution. This is important to maintain pH ranges.
Thus, Molecule 1. is aldehyde and ketone, Molecule 2 is acid and thio, Molecule 3 is acid and amide, Molecule 4 is alcohol and ether, Molecule 5 is Alcohol and acid.
To learn more about the polar compound, follow the link;
https://brainly.com/question/29869649
#SPJ1
Due to friction between a tire and the road surface, the temperature of the air inside a tire increases as one drives. if the tire pressure is 179 kPa when the car is in the driveway at 5.0 C, what is the pressure of the gas inside the tire when the temperature of the gas increases to 35 C? Assume tire volume and number of particles remain constant
Answer:
40.10 atm. is answer i think ....
the volume of the balloon was 4.21L when the temperature was 25.0°C, what will the volume of the balloon be when the temperature is 50.0°C?
If the volume of the balloon was 4.21L when the temperature was 25.0°C, 8.42L will be the volume of the balloon be when the temperature is 50.0°C. if Mass and pressure is constant.
What is the relation between Volume and temperature?The volume of a fixed mass of gas is linearly proportional to temperature at given constant pressure. In simple words the volume of a fixed mass of a gas reduces when it is cooled and increases when the temperature is raised.Hence, in the above case it is shown that temperature is rising twice of its original value so, the volume of that given mass of gas in the balloon will also increase by twice.
Solution:
4.21L=25.0°C
4.21L×2=50.0°C
8.42L=50.0°C
8.42L will be the volume of the balloon be when the temperature is 50.0°C.
To know more about volume visit
https://brainly.com/question/12050285
#SPJ1