Copernicus said that t he rotation of the Earth on its axis caused the A daily motions in the heavens. B phases of the Moon. C retrograde motion of the planets D eclipses of the Moon. E motion of the Sun along the ecliptic.

Planets that are made mostly of gas are known as gas giants. The four outer planets in our solar system, Jupiter, Saturn, Uranus, and Neptune, are all gas giants.

These planets are made primarily of hydrogen and helium, with trace amounts of other elements. Planets that are made mostly of gas are known as gas giants. The four outer planets in our solar system, Jupiter, Saturn, Uranus, and Neptune, are all gas giants.

Gas giants are thought to have formed farther away from the Sun than the terrestrial planets (like Earth), where temperatures were low enough for hydrogen and helium to condense into solid ice. In these colder regions, there was a lot more gas and dust available to form planets, which led to the formation of gas giants.

As gas giants formed, their large masses and strong gravitational forces allowed them to capture even more gas and dust from the surrounding space, which contributed to their growth. The extreme pressures and temperatures in the cores of these planets also cause the hydrogen to undergo a phase transition, turning into metallic hydrogen that behaves like a liquid and contributes to the planet's magnetic field.

It's worth noting that gas giants are not entirely made of gas - they also have solid cores, although the exact size and composition of these cores is not well understood. Some gas giants may also have liquid layers between the gas and the core and may have complex weather patterns on their surfaces due to the interactions of different layers of gas moving at different speeds.

To know more about planets follow

https://brainly.com/question/503999

#SPJ1

The sound intensity level (SIL) of the African cicada is given as 107 dB at a distance of 0.50 m.

SIL equals 10 log(I/I0)

If we rearrange this formula to account for I, we obtain:

I equals I0 x 10(SIL/10).

I = 2.00 x 10-2 W/m2 x 10(107/10) x (10-12 W/m2)

Therefore, at a distance of 0.50 m, the African cicada's sound intensity is roughly 2.00 x 10–2 W/m2.

To know more about sound intensity level , check out :

https://brainly.com/question/17062836

#SPJ4

The sound intensity level (SIL) of the African cicada is given as 107 dB at a distance of 0.50 m.

To determine the sound intensity I at the distance r, we can apply the following formula:

SIL equals 10 log(I/I0)

where I0, which is designated as 10(-12) W/m2, is the reference sound intensity.

If we rearrange this formula to account for I, we obtain:

I = I0 x 10(SIL/10)

Inputting the values provided yields:

[tex]I = 2.00 \times 10^{-2} W/m^2 \times 10(107/10) \times (10^{-12} W/m^2)[/tex]

Therefore, at a distance of 0.50 m, the African cicada's sound intensity is roughly [tex]2.00 \times 10^{-2} W/m^2[/tex].

To know more about sound intensity level, check out :

brainly.com/question/17062836

#SPJ4

89.4 m/s is the velocity of the race car at the end of the run.

Define acceleration.

The definition of acceleration is the speed at which velocity varies with respect to time. Since acceleration has both a magnitude and a direction, it is a vector quantity. Additionally, it is the first derivative of velocity with respect to time or the second derivative of position with respect to time.

The definition of velocity is the rate of displacement. The direction of a body or object's movement is defined by its velocity. There are only two ways to accelerate: changing your speed or changing your direction, or changing both. This is because velocity is both a speed and a direction.

Given,

vi = 0; a = 10; d = 400; vf = ?

vf²= vi² + 2ad

vf² = 0 + 2(10)(400)

vf² = 8000

vf = 89.4 m/s

To learn more about velocity use link below:

https://brainly.com/question/80295

#SPJ4

The density of water at standard temperature and pressure (STP), which is defined as 0 °C (273.15 K) and 1 atm (101.325 kPa), is approximately 1000 kilograms per cubic meter (kg/m³).

This value is commonly used as a reference value for the density of liquids and is often abbreviated as 1 g/cm³ or 1 g/mL.

Temperature is a measure of the degree of hotness or coldness of an object, substance, or environment. It is a physical quantity that quantifies the average kinetic energy of the molecules in a substance or object. The unit of measurement for temperature is degrees Celsius (°C) or Fahrenheit (°F), and the international standard unit is Kelvin (K).

Temperature is an essential factor in determining the physical, chemical, and biological properties of a substance or object. It affects the rate of chemical reactions, the conductivity of materials, and the behavior of living organisms. Temperature can be measured using thermometers, which are devices that detect changes in the thermal energy of a substance or object.

To learn more about Temperature visit here:

brainly.com/question/27942203

#SPJ4

The velocity of the bag of feathers after falling for 3.5 seconds

is 34.3m/s.

The velocity of a falling object can be calculated using the following formula:

v = v_0 + g * t

where v_0 is the initial velocity (assumed to be zero for an object in free fall), g is the acceleration due to gravity (9.8 m/s^2), and t is the time elapsed.

The mass of the bag of feathers is not necessary for this calculation as the acceleration due to gravity is the same for all objects.

For the given case, after 3.5 seconds, the velocity of the bag of feathers can be calculated as follows:

v = 0 + 9.8 m/s^2 * 3.5 s

v = 34.3 m/s

To learn more about Velocity :

https://brainly.com/question/11313315

#SPJ4

The force of gravitational attraction increases by 9 as the two point masses increase by 3.

Gravitational force of attraction, F is the force that pulls two point masses, m and M which are separated by a distance, d.

Mathematically,

Fg = GMm/r^2

Initially,

M1 = M1

M2 = M2

The remaining parameters are unchanged.

Fg1 = G * M1 * m1/(d/2)^2

Then,

M1 = 3M1

M2 = 3M2

Fg2 = G * 3M1 * 3M2/(d/2)^2

Making the constants G/(d/2)^2 the subject of formula and then comparing both equations,

= Fg1 = (M1 * M2); Fg2 = (9 * M1 * M2)

= Fg2 = 9 * Fg1

The force of gravitational attraction increases by 9 as the two point masses increase by 3.

What is gravitational force?

To know more about gravitational force, click the link given below:

https://brainly.com/question/12528243

#SPJ1

Answer: The answer provided describes the difference between wind speed and wind velocity, and explains why a statement made by a meteorologist that only mentions wind speed is inaccurate.

Explanation:

The statement made by the meteorologist is false because wind speed and wind velocity are not the same things. Wind speed refers to how fast the wind is moving, while wind velocity refers to both the speed and direction of the wind.

To accurately describe the wind's velocity, the meteorologist would need to include both the speed and direction of the wind.

For example, if the wind is moving at 30 miles per hour from the southeast, the meteorologist could say "High wind advisory! The wind is expected to reach a velocity of 30 miles per hour from the southeast.

In the original statement, the meteorologist only described the wind's speed, not its velocity. By only mentioning the wind speed, it is unclear whether the wind is moving in a specific direction and the statement becomes inaccurate.

Speed at which the wind turbine stopped so that damage does not occur :  25 meters per second.

When anemometer registers wind speeds higher than 55 mph, then it triggers the wind turbine to automatically shut off. Wind turbines work on simple principle: instead of using electricity to make wind, wind turbines use wind to make electricity.

A modern turbine will generate electricity when wind speeds reach six to nine miles per hour (mph), known as cut-in speed. Turbines will shut down if the wind is blowing too hard (roughly 55 miles an hour) to prevent the equipment damage.

To know more about wind turbine, refer

https://brainly.com/question/15321264

#SPJ4

The equivalent capacitance of the combination when connected in series is 1.66 μF and the equivalent capacitance of the combination when connected in parallel is 19.61 μF.

The capacitance C₁ is given as 11.8 μF.

The capacitance C₂ is given as 4.25 μF.

The capacitance C₃ is given as 3.56 μF.

If the capacitors are connected in parallel, the equivalent capacitance, C eq₁ is calculated as,

C eq₁ = C₁ + C₂ + C₃

C eq₁ = 11.8 μF + 4.25 μF + 3.56 μF = 19.61 μF

If the capacitors are connected in series, the equivalent capacitance, C eq₂ is calculated as,

1/C eq₂ = 1/C₁ + 1/C₂ + 1/C₃

1/C eq₂ = 1/11.8 + 1/4.25 + 1/3.56

1/C eq₂ = 0.085 + 0.235 + 0.281

1/C eq₂ = 0.601

C eq₂ = 1.66 μF

To know more about capacitance:

https://brainly.com/question/27988457

#SPJ4

The probability of rolling a 3 on a single six-sided die is 1/6, or 16.7%.

Probability is a mathematical study of outcomes in uncertain situation it is used to describe the like would have an event occurring and it can be expressed as the number between 0 to 1 probability is used to quantify the uncertainty associated with any given event it helps us understand how likely it is that something will happen and it can be used to make prediction about futures even probability theory is it of modern statistic and is widely used in fields such as finance economics and science.

Therefore, the probability of rolling at least one 3 when rolling two six-sided dice is 2 × 1/6, or 33.3%. This is because the probability of rolling a 3 on one die is independent of the probability of rolling a 3 on the other die. This means that the probability of rolling at least one 3 is equal to the sum of the probabilities of rolling a 3 on each of the two dice (1/6 + 1/6 = 2/6). As a result, the probability of rolling at least one 3 when rolling two six-sided dice is 33.3%.

To know more about probability click-
https://brainly.com/question/24756209
#SPJ4

Rock that has partially weathered can be found in a soil profile's C horizon.

horizon: an unique layer of soil that is roughly parallel to the land surface and whose characteristics are the result of the interactions between living things and percolating water. The topsoil, for instance, is referred to as the A horizon, while the subsoil B horizons are the name given to horizons.

"Eye level" and "horizon line" are frequently used interchangeably. The term "horizon line" or "eye level" refers to a physical/visual line dividing sky from land or sea. Whether viewing an object, an interior scene, or an external scene, it refers to the real height of the viewer's eyes.

To know more about soil visit:-

https://brainly.com/question/12931456

#SPJ1

The value is 5.4 in feet and 65 inches

A conversion factor is a ratio of equivalent measurements used to convert a quantity from one unit of measurement to another. Conversion factors are often used in mathematics and science to ensure that quantities are expressed in consistent units, which makes it easier to perform calculations and make comparisons.

For example, consider a situation where you want to convert a quantity from inches to centimeters. The conversion factor for this conversion would be:

1 inch = 2.54 centimeters

This is the conversion factor that we used to obtain then values above.

Learn more about conversion factor:https://brainly.com/question/3016643

#SPJ1

False. Most comets actually have long periods and orbit at an inclination to the ecliptic plane, meaning they don't follow the same plane as the planets in our solar system.

Comets are small, icy bodies that originate in the outer reaches of the solar system, beyond the orbit of Neptune. They are made up of ice, dust, and rocky materials, and they typically have highly elliptical orbits that bring them close to the sun at their closest approach, called perihelion, and far away from the sun at their farthest point, called aphelion.

Comets with long periods take many years, even centuries or millennia, to complete a single orbit around the sun. They are thought to come from the Oort cloud, a region of icy bodies that surrounds the solar system at a distance of up to 100,000 astronomical units (AU) from the sun. As they approach the sun, the heat causes the ice to sublimate, releasing gas and dust that forms the characteristic coma and tail of the comet.

On the other hand, comets with short periods have orbits that last less than 200 years and are believed to originate in the Kuiper Belt, a region of icy bodies beyond Neptune that extends from about 30 to 50 AU from the sun. Some short-period comets have nearly circular orbits that are close to the ecliptic plane, while others have more eccentric orbits that take them high above or below the plane.

Learn more about comet here:

https://brainly.com/question/12443607

#SPJ4

For a full cycle, four-stroke engines revolve twice. This indicates that 720 crank degrees are required to complete a cycle.

The four basic engine strokes—INTAKE, COMPRESSION, POWER, and EXHAUST—are presumably already familiar to you. Each stroke corresponds to 180 crank degrees, or half a crankshaft revolution. Two crankshaft revolutions, or 720°, are equal to 4 cycles times 180°.

Engines with a four-stroke cycle. An internal combustion engine with a four-stroke cycle uses the four distinct piston strokes of intake, compression, power, and exhaust to complete one operational cycle.

To know more about 4 stroke engines visit:

https://brainly.com/question/14378516

#SPJ4

Answer:

Explanation:

The force on an electron moving through an electric field is given by:

F = qE

where q is the charge of the electron, and E is the electric field.

The force on an electron moving through a magnetic field is given by:

F = qvB

where v is the speed of the electron, and B is the magnetic field.

Since the electron is experiencing no net force, the electric force must be balanced by the magnetic force. Thus:

qE = qvB

Solving for v, we get:

v = E/B

Substituting the given values, we get:

v = 400 N/C / 0.15 T

v = 2666.67 m/s

Therefore, the speed of the electron is 2666.67 m/s.

Yes, it is possible to replace the glass plate in a microwave. The glass plate is a removable part of the microwave, and it can be replaced if it becomes damaged or broken.

To replace the glass plate, follow these steps:

   Determine the size and shape of the glass plate: Before purchasing a replacement glass plate, you will need to determine the size and shape of the original glass plate. This information can typically be found in the owner's manual for the microwave or by measuring the diameter of the plate.

   Purchase a replacement glass plate: Once you have determined the size and shape of the glass plate, you can purchase a replacement plate from a store or online retailer.

   Remove the old glass plate: Open the microwave and carefully remove the old glass plate from the rotating base. Be sure to handle the broken glass carefully to avoid injury.

   Install the new glass plate: Place the new glass plate onto the rotating base of the microwave, aligning it with the guides or notches to ensure that it rotates properly.

   Test the microwave: Close the microwave and run it for a short period of time to ensure that the new glass plate is rotating properly and that there are no issues.

It is important to note that not all glass plates are interchangeable between microwaves, as different models may have different size and shape requirements. Be sure to check the manufacturer's recommendations and specifications before purchasing a replacement glass plate.

For such more questions on Microwave

https://brainly.com/question/13085297

#SPJ4

The magnitude of the force exerted on the door by the woman is equal to the magnitude of the force exerted on the woman by the door.

Newton's third law of motion states that "For every action, there is an equal and opposite reaction." This means that when two objects interact, they apply equal and opposite forces on each other. The forces are proportional in magnitude and opposite in direction. This law helps to explain how objects react to forces and how forces result in motion

The door and the woman are interacting forces, and the magnitude of the force that each exerts on the other is equal. However, the direction of the forces is opposite. The woman is pushing the door in one direction, while the door is pushing back on the woman in the opposite direction.

Learn more about Newton's third law of motion, here:

https://brainly.com/question/29768600

#SPJ9

The deroglie wavelength is obtained by the formulas =ph=mvh==0. 0251006 and 6261034 for a bullet with a mass of 25 gm and a speed of 100 m/s, respectively. λ=ph=mvh=λ=0. 025×1006. 626×10−34=2.

While troughs have the same wavelength, the wavelength is the distance between two wave crests. The frequency is measured in cycles per second (Hz), which is the number of vibrations that pass over a certain location in a second (Hertz).

Their wavelength is defined as the distance between two comparable sites on adjacent waves. The quantity of waves crossing a specific location during a defined period of time is known as the wave frequency. The relationships between the three variables are illustrated by this equation: Speed is defined as Wavelength x Frequency.

To know more about Wavelength visit:

https://brainly.com/question/12924624

#SPJ4

Answer:

Below

Explanation:

Specific heat has units of    J / (kg C)  

  ( a degree of C is the same as one K)

Sub in the values

   678 J / (3.78 kg * 4.25 C) = spec heat = 42.2   J/(kg-K)

Distance between the two fluid levels in the manometer is 0.00916 meters or 9.16 millimeters.

A manometer is a device used to measure pressure by comparing it to the pressure of a fluid in a column. In this case, the manometer is filled with water, and is connected to the compressed air tank alongside a pressure gauge. The pressure gauge indicates that the pressure inside the tank is 11 kPa, but the manometer measures the difference between the pressure inside the tank and the atmospheric pressure. To calculate the distance h between the two fluid levels in the manometer, we need to use the following formula:

ΔP = ρgh

where ΔP is the pressure difference, ρ is the density of the fluid, g is the acceleration due to gravity, and h is the height difference between the two fluid levels.

First, we need to calculate the pressure difference between the air inside the tank and the atmospheric pressure:

ΔP = [tex]P_t - P_a[/tex] = 11 kPa - 101 kPa = -90 kPa

The negative sign indicates that the pressure inside the tank is lower than the atmospheric pressure. Next, we can plug in the values of ρ and g, which are [tex]1000 kg/m^3[/tex] and [tex]9.81 m/s^2[/tex], respectively:

[tex]-90 kPa = 1000 kg/m^3 * 9.81 m/s^2 * h[/tex]

Solving for h, we get:

h = [tex]-90 kPa / (1000 kg/m^3 * 9.81 m/s^2)[/tex] = -0.00916 m

Learn more about manometer here:

https://brainly.com/question/28566289

#SPJ4

The light gathering power of telescope b is 25 times that of telescope a

The light gathering power of a telescope is determined by its collecting area, which is proportional to the square of the diameter of the primary mirror.

Assuming both telescopes have the same quality of optics and are used under similar conditions, the ratio of their light gathering powers is,

(telescope b collecting area) / (telescope a collecting area)

= (telescope b diameter)^2 / (telescope a diameter)^2

= (100 cm)^2 / (20 cm)^2

= 25^2 / 5^2

= 25

Therefore, the light gathering power of telescope b is 25 times that of telescope a.

To know more about the light gathering power, here

brainly.com/question/14664157

#SPJ4

Answer:

Locks

Explanation:

Locks were used to raise and lower boats. They pump water in and/or out of "locked" chambers to get boats to the same level as the water.

The time it takes for the celestial sphere to rotate once relative to the earth is called synodic day.

Synodic day or synodic rotation period is the period for a celestial object to rotate once in relation to the star it is orbiting which is the basis of solar time.

Synodic day is the period it takes for planet to rotate once in relation to  body it is orbiting. For Earth, synodic day is known as a solar day, and it is about 24 hours long. Reason that the synodic month is longer than the sidereal month is because the earth orbits the sun at the same time that the moon goes through its phases.

To know more about synodic day, refer

https://brainly.com/question/30475454

#SPJ4

Answer:

Below

Explanation:

Your mass is irrelevant....here is why:

All of your POTENTIAL energy (mgh)

           will be converted to KINETIC energy  ( 1/2 m v^2)

so

mgh = 1/2 m v^2     divide both sides by 'm' <====then 'm' is gone !

gh = 1/2 v^2            now multiply by 2

2 gh  = v^2              sqrt both sides

v = sqrt (2gh)     = sqrt  [ 2 ( 9.81)(3.4)]   = 8.2 m/s

The unit of electrical capacitance is the farad (abbreviated F), named after the English physicist and chemist Michael Faraday.

Electrical capacitance is a property of a circuit that describes its ability to store electrical charge. It is defined as the ratio of the magnitude of electric charge stored on a conductor to the potential difference (voltage) across the conductor. Capacitance is measured in farads (F), which is a very large unit, so capacitors are typically rated in smaller units such as microfarads (µF) or picofarads (pF).

Capacitors are electronic components that are designed to provide capacitance and are commonly used in electronic circuits for a variety of applications, such as filtering, timing, and energy storage. Capacitance is determined by the geometry of the conductors, the distance between them, and the dielectric constant of the material between them. A capacitor consists of two conductors separated by a dielectric material, which can be air, paper, ceramic, or some other non-conductive material.

To learn more about Electrical Capacitance visit here:

brainly.com/question/28566020

#SPJ4

The existence of atoms explain the conservation of matter that the reaction has to be balanced.

Using moles lets us use smaller numbers in calculations.

What is moles?

Moles, or Avogadro's number, is a unit of measurement used in chemistry. It is the number of atoms, molecules, ions, or other particles in a given amount of a substance. It is equal to 6.022 × 1023 particles per mole.

1) Matter cannot be created and cannot be destroyed. But it can be changed from one form to the another.

Each atom of particular element has constant weight. In a chemical reaction, weight of the all the reactant atoms must be equal to weight of the products. This indicates the atom changes its state from one form to other. So existence of an atom explains the law of conservation of matter.

2) In a chemical reaction to estimate the amount of reactants and products, we have to consider the number of moles and not the weight .

Example

H2 + Cl2 -------------> 2HCl

In this reaction one H2 molecule reacts with one Cl2 molecule and we cannot say that one gram of H2 reacts with one gram of Cl2 molecule. Why because mass of one H2 molecule is 2grams and mass of one Cl2 molecule is 71 grams. So we can't  say that 1 gm of H2 reacts with 1 gm of Cl2.  Here 2 gm of H2 molecules reacts with 71 gms of Cl2 molecules. To avoid this confusion number of moles is preferable in the estimation of reactants and products.

Therefore, in conservation of matter the reaction has to be balanced and Using moles lets us use smaller numbers in calculations.

To learn more about moles from the link

https://brainly.com/question/20486415

#SPJ1

Temperature. The average kinetic energy of the molecules of an object is related to its temperature.

Kinetic energy is the energy of an object in motion. It is the energy associated with the movement of an object or particle, and it is equal to the work done by a force on an object to put it into motion. Kinetic energy is often referred to as the energy of motion and can be found in many forms, from the energy stored in objects such as a car or truck to the energy stored in the movement of electrons within an atom.

As the average kinetic energy of the molecules increases, the temperature of the object increases. Thus, a change in the average kinetic energy of the molecules of an object can be detected by measuring a change in the object's temperature.

To learn more about kinetic energy
https://brainly.com/question/8101588
#SPJ4

The magnetic field is a zone where the force is active along imaginary lines. From the south magnetic pole to the north magnetic pole, this force has an effect on all magnetized objects, such as the needle of a compass. Under the effect of Earth's magnetic field, the needle always points toward the north magnetic pole.

When magnets attract or repel one another, they exert a force known as magnetism. The movement of electric charges is what generates magnetism. Atoms are little building blocks that make up all substances. There are electrons in every atom, which are charged particles.

The main purpose of a compasses is to find direction on the ground during navigation. This functions because the Earth's magnetic field resembles that of a bar magnet. North and south are indicated by the compass needle pointing in the direction of the Earth's magnetic field.

Learn more about Magnetism here:

https://brainly.com/question/14997726

#SPJ4

When a car goes around a corner at 20 mph, (D) it is accelerating because it's changing direction. The direction of the velocity which is a vector is changing so the it accelerates.

An acceleration is a rate of change in velocity of an object with respect to time. It can be expressed as

a = Δv/Δt

Where

A car goes around a corner at 20 mph. Find the reason why it is accelerates!

We know that an object accelerates when it has a change in velocity. The magnitude of the velocity of the car doesn't change, but the direction does.

A velocity is a vector which has both magnitude and direction. While the direction of the car is changing around a corner, the velocity also changes. Hence, with a change in velocity, we say car is accelerating.

Learn more about acceleration here:

brainly.com/question/30433238

#SPJ4