Answer:
C. electrialExplanation:
I hope l helped you. Please follow me. ❤❤❤❤A 4 m^3 metal block is suspended using a cable in salt water with density 1030 kg/m^3. Tension on the cable is 42600N. What is the weight of the block. What is the density of the block?
Answer:
The density of the block is 1113.216 kilograms per cubic meter.
The weight of the block is 43669.237 newtons.
Explanation:
According to the Archimedes' Principle, the drag force experimented by the metal block is equal to the weight of the volume of water displace by the block. Besides, the block has a weight that cannot be neglected and experiments a tension from the cable. Given that the metal block is suspended, then we could consider that block is at rest.
From Newton's Laws of Motion we obtain the following equation of equilibrium:
[tex]\Sigma F = T-\rho_{m}\cdot V_{m}\cdot g + \rho_{w}\cdot V_{m}\cdot g = 0[/tex] (1)
Where:
[tex]T[/tex] - Tension on the cable, measured in newtons.
[tex]\rho_{w}[/tex], [tex]\rho_{m}[/tex] - Densities of salt water and the metal block, measured in kilograms per cubic meter.
[tex]V_{m}[/tex] - Volume of the metal block, measured in cubic meters.
[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.
If we know that [tex]T = 42600\,N[/tex], [tex]\rho_{w} = 1030\,\frac{kg}{m^{3}}[/tex], [tex]V_{m} = 4\,m^{3}[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], then the density of the block is:
[tex]T+\rho_{w}\cdot V_{m}\cdot g = \rho_{m}\cdot V_{m}\cdot g[/tex]
[tex]\rho_{m} = \frac{T+\rho_{w}\cdot V_{m}\cdot g}{V_{m}\cdot g}[/tex]
[tex]\rho_{m} = \frac{42600\,N+\left(1030\,\frac{kg}{m^{3}} \right)\cdot (4\,m^{3})\cdot \left(9.807\,\frac{m}{s^{2}} \right)}{(4\,m^{3})\cdot \left(9.807\,\frac{m}{s^{2}} \right)}[/tex]
[tex]\rho_{m} = 1113.216\,\frac{kg}{m^{3}}[/tex]
The density of the block is 1113.216 kilograms per cubic meter.
Lastly, the weight of the block ([tex]W[/tex]), measured in newtons:
[tex]W = \rho_{m}\cdot V_{m}\cdot g[/tex] (2)
[tex]W = \left(1113.216\,\frac{kg}{m^{3}}\right)\cdot (4\,m^{3}) \cdot \left(9.807\,\frac{m}{s^{2}} \right)[/tex]
[tex]W = 43669.237\,N[/tex]
The weight of the block is 43669.237 newtons.
Can a physical guantity have unit but is dimensionless ?
HELP WILL GIVE BRAINLIEST OF CORRECT
Answer:
B)
Explanation:
The answer is B)- The object's speed must be changing.
So will I get the Brainliest...
Drag each item to indicate whether it is a characteristic of dark matter or baryonic matter. (2 points)
Dark Matter
Baryonic Matter
:: has been observed directly
:: interacts with baryonic matter
:: interacts with electromagnetic radiation
has not been observed directly
:: does not interact with electromagnetic radiation
++ does not interact with baryonic matter
Answer:
Dark matter:
- Doesn't interact with baryonic matter.
- It has not been observed directly
- dark matter does not absorb, reflect or even emit light, thereby making it to be extremely hard to spot. Therefore, it does not interact with electromagnetic radiation.
Explanation:
Dark matter:
- Doesn't interact with baryonic matter.
- It has not been observed directly
- dark matter does not absorb, reflect or even emit light, thereby making it to be extremely hard to spot. Therefore, it does not interact with electromagnetic radiation.
Baryonic matter:
- Has been observed directly because it includes nearly all the matter that we see in the world daily.
- It interacts with baryonic matter
- interacts with electromagnetic radiation
Dark Matter:
It has not been observed directly.It does not interact with baryonic matter.It does not interact with electromagnetic radiation.Baryonic Matter:
It has been observed directly.It interacts with baryonic matter.It interacts with electromagnetic radiation.Dark matter can be defined as often invisible substances that are difficult to spot because they don't absorb, emit or reflect light.
Hence, dark matter do not affect human view because they do not interact or interfere with electromagnetic radiation (force).
Although, humans can see right through the (weakly interacting) dark matter but it has not been observed directly.
Baryonic matter can be defined as a dark matter that is made up of baryons such as neutrons, and protons. Also, they are ordinary matter (both fermions and hadrons), as distinct from exotic forms.
In conclusion. baryonic matter has been observed directly and it can interact with electromagnetic radiation.
Read more: https://brainly.com/question/15677526
i'd like you to explain this to me, I don't have a clue on how to do this
1. I would like you to then go into detail as to why this is an important discovery or application of this scientific principle.
2. Then I would like you to explain how this applies to what we have learned.
"discovery" - Spanish flu
scientific concept/principle - exponential growth
thank you!
Answer:
Explanation:
The Spanish flu pandemic of 1918, the deadliest in history, infected an estimated 500 million people worldwide about one-third of the planet’s population and killed an estimated 20 million to 50 million victims, including some 675,000 Americans. The 1918 flu was first observed in Europe, the United States and parts of Asia before swiftly spreading around the world. At the time, there were no effective drugs or vaccines to treat this killer flu strain. Citizens were ordered to wear masks, schools, theaters and businesses were shuttered and bodies piled up in makeshift morgues.
Does this sound familiar?
Its the same thing but with a different name called the Corona virus pandemic the same thing happened in 1918 and now it is happening again in 2020 , but in in 2020 there are far less people infected by the Corona virus as compared to the Spanish flu the numbers approximate around 70 million infected and deaths are around 2 million.
The rapid spread of Spanish flu in the fall of 1918 was at least partially to blame on public health officials unwilling to impose quarantines during wartime. The public health response to the crisis in the United States was further hampered by a severe nursing shortage as thousands of nurses had been deployed to military camps and the front lines. But one of the chief reasons that the Spanish flu claimed so many lives in 1918 was that science simply didn’t have the tools to develop a vaccine for the virus. Microscopes couldn’t even see something as incredibly small as a virus until the 1930s.
That is why the Spanish Flu claimed so many lives in 1918 and the Corona Virus didn't claim that many.
The Corona Virus patients with respect to Spanish Flu patients exponentially decreased because in 2020 we had the specific tools to fight the virus and since mankind was aware when the world engrossed into the pandemic 100 years before the new the risks that it could impose on the world , People started to Quarantine themselves, more nurses/doctors are available rather than in the era of the 19th century.
Mathematically we would say that the exponential growth would be:
[tex]y=ab^x[/tex]
This is an exponential function, which means as you increase x , y increases exponentially, and where a is the initial value and b is the growth factor.
For example:
There are 100,000 cases of Coronavirus when the virus outbroke. If the number of cases doubles every week then how many cases would be there in 10 weeks?
So the solution would be
[tex]y=ab^x\\y=100000(2)^{10}\\y=102400000[/tex]
Which means people infected with the virus would be approximate 102.5 million. But since this kind of pandemic already broke out in 1918 called the Spanish flu mankind was wise and controlled its growth factor (b) by Quarantining people , shutting down businesses, schools and implying them to work from home , closing off cafeteria's restaurants for dine in purposes and just allowing take away to reduce human contact, and since 1918 we have more doctors and nurses to treat the infected in 2020 we reduced the outbreak to 70 million in about 10 months other wise it could have been 100 million in just 2.5 months as we can see.
So guys stay indoors just go out if you REALLY need something, avoid meeting others , wear masks and gloves :)
room's become bright at the day time although there is no bright sunlight in the rooms why
this is give reason
Answer:
The room become bright in the day by a process call scattering of light or Rayleigh scattering.
Explanation:
It is called Rayleigh scattering or scattering of light because Rayleigh scattering is the scattering if light or electromagnetic radiation by smaller particles which have radius of less than 110 nanometer in a medium and the wavelengths of the electromagnetic. Wave or light remain unchanged. The scattering of light occur in the day time in the room and this bring of brighten up of the room.
A nuclear power plant is being built to generate electricity for a large
metropolitan area. Which process will it use?
O A. Nuclear decay of uranium-238
B. Chemical decay of wood
C. Nuclear fission of uranium-235
O D. Combustion of fossil fuels
Answer:
C. Nuclear fission of uranium-235
Answer:
C. Nuclear fission of uranium-235
Explanation:
Give thanks to above me
What is the answer and why
Answer:
The distance between gas species are assumed to be large.
Explanation:
Hello!
In this case, since the ideal gas condition is a hypothetical state of gases at which they are at low pressure and high temperature, because it is assumed the molecules are neither attracted nor repelled by each other, we can infer that the correct statement is "the distance between gas species are assumed to be large" because the low pressure and high temperature ensure the molecules are far away from each other and therefore allowing the ideal equation to be used to model the case, otherwise a rigorous equation of state such as Peng-Robinson, Redlich-Kwong and other should be used to model it as gases actually undergo interaction between their molecules.
Best regards!
a proton is in a box of width L. what must the width of the box be for the ground level energy to be 5.0 MeV, a typical value for the energy with which the particles in a nucleus are bound
Answer:
Width of a box, [tex]l=6.41\times 10^{-15}\ m[/tex]
Explanation:
The ground level energy of a proton in a box is, E = 5 MeV
[tex]E =5\times 10^6\ eV\\\\=5\times 10^6\times 1.6\times 10^{-19}\\\\=8\times 10^{-13}\ J[/tex]
Energy in a box is given by :
[tex]E=\dfrac{n^2h^2}{8ml^2}[/tex]
For ground state, n = 1
m is mass of proton
h is Planck's constant
l is width of the box
[tex]l^2=\dfrac{n^2h^2}{8mE}\\\\l^2=\dfrac{1^2\times (6.63\times 10^{-34})^2}{8\times 1.67\times 10^{-27}\times 8\times 10^{-13}}\\\\l=\sqrt{\dfrac{1^{2}\times(6.63\times10^{-34})^{2}}{8\times1.67\times10^{-27}\times8\times10^{-13}}}\\\\l=6.41\times 10^{-15}\ m[/tex]
So, the width of the bx is [tex]6.41\times 10^{-15}\ m[/tex].
The width of the box, for the ground level energy with which the particles in a nucleus are bound, is 6.41×10⁻¹⁵ m.
What is the energy in a box?The energy in a box can be calculated with the following formula.
[tex]E=\dfrac{n^2h^2}{8mL^2}[/tex]
Here, (E) is the energy at the nth state, (n) n is the quantum number, (h) is plank's constant and (L) is the width of the box.
The proton is in a box of width L. The width of the box be for the ground level energy to be 5.0 MeV, a typical value for the energy with which the particles in a nucleus are bound.
The energy of the box is at ground level. Then the value of nth state will be 1. It is known that the value of plank's constant is 6.63×10⁻³⁴ m²kg/s.
Put this values in the above formula as,
[tex]8\times10^{-13}=\dfrac{(1)^2(6.63\times10^{-34})^2}{8(1.67\times10^{27})(l)^2}\\l=6.41\times10^{-15}\rm\; m[/tex]
Thus, the width of the box, for the ground level energy with which the particles in a nucleus are bound, is 6.41×10⁻¹⁵ m.
Learn more about the energy in a box here;
https://brainly.com/question/26276150
Explain how would you infer through an experiment that substances generate electric current.
Answer:
How will you infer with the help of an experiment that the same current flows through every part of the circuit containing three resistors R1 ,R2 and R3 in series connected to a battery of V volt.
we can connect voltmeter across each resistor
V = V1 + V2 + V3
I1 = current across resistor R1
I1 = V1/R1
similarly
I2 = current across resistor R2
I2= V2/R2
I3 = current across resistor R3
I3 = V3/R3
we will see that
I1 = I2 = I3
also it will be equal to V/(R1 + R2+R3)
Why do hurricanes develop over oceans?
Question 5 options:
The ocean is affected by the Coriolis effect.
The ocean winds blow from north to south.
The warmer ocean adds water vapor to the air mass.
The ocean currents cause air to move toward the land.
My guess is; The warmer ocean adds water vapor to the air mass.
I'm really sorry if I'm wrong
The warmer ocean adds water vapor to the air mads
2 questions! most important one is the second one so answer that. only answer if the answer to the 2 question is yes. if you cant say yes to the second question then just dont answer
Need help ASAP ! Please
what do u need help with here?
A box of mass 72 kg is at rest on a horizontal frictionless surface. A constant horizontal force F then acts on the box and accelerates it to the right. It is observed that it takes the box 3.4 seconds to travel 13 meters. What is the magnitude of the force
Answer:
[tex]162\ N[/tex]
Explanation:
[tex]We\ are\ given\ that,\\Mass\ of\ the\ box=72\ kg\\Distance/Displacement\ travelled\ by\ the\ box\ during\ the\ application\ of\\ Force=13\ m\\Time\ taken\ for\ it\ to\ displace=3.4 \seconds\\Now,\\As\ we\ know\ that,\\Force=Mass*Acceleration\\In\ order\ to\ know\ force\ we\ need\ to\ know\ the\ acceleration.\ Lets\ find\\ that\ out.\\We\ would\ use\ Newton's\ Third\ Equation\ Of\ Motion\ and\ Newton's\\ First\ Equation\ Of\ Motion:\\2as=v^2-u^2\\v=u+at[/tex]
[tex]Hence,\\First\ lets\ consider\ Newtons\ First\ Equation\ Of\ Motion:\\v=u+at\\v-u=at\\Hence\ now\ lets\ move\ on\ to\ Newton's\ Third\ Law\ Of\ Motion:\\2as=v^2-u^2\\2as=(v+u)(v-u)\\Substituting\ (v-u)=at,\\2as=at(v+u) \\Hence,\ as\ the\ body\ moves\ from\ rest,\ u=0\\So,\\2as=at*v\\Cancelling\ a\ at\ both\ the\ sides\ we\ get,\\2s=vt\\Hence,\\Lets\ plug\ in\ the\ values\ of\ Displacement\ and\ Time,\ Shall\ we?\\Hence,\\2*13=3.4v\\26=3.4v\\\frac{26}{3.4}=v\\v \approx 7.647\ m/s[/tex]
[tex]Now,\\As\ we\ know\ that,\\a=\frac{v-u}{t} [Equation\ for\ acceleration]\\Hence,\\a=\frac{v}{t} [As\ u=0]\\Hence,\\Acceleration=\frac{7.647}{3.4} \\Acceleration \approx 2.25\ m/s^2\\[/tex]
[tex]Hence,\\Now,\\As\ by\ using\ expression\ for\ Force,\\Force= Mass*Acceleration\\Here,\\Force\ exerted\ on\ the\ box=72*2.25= 162 N[/tex]
3 women push a stalled car. Each woman pushes with a 425 N force. What is the mass of the car if the car accelerates at 0.85 m/s2?
Answer:
1500kg
Explanation:
Assuming that the women push the car in the same direction, then the total force is:
Fnet = 425 N ⋅ 3
= 1275 N
To find the mass, we use Newton's second law of motion, which states that,
F = ma
where:
·F is the force applied in newtons
·m is the mass of the object in kilograms
·a is the acceleration of the object in meters per second squared.
So we get:
F
m= ⁻⁻⁻⁻⁻
a
1275N
= ⁻⁻⁻⁻⁻⁻⁻⁻⁻⁻⁻⁻⁻⁻
0.85 m/s²
= 1500 kg
I NEED THE KNOWLEDGE OF YOU SMART GUYS OUT THERE!!!!!!
...................
when 10 similar coins are dropped into a graduated cylinder from 75 ml to 100ml. what is average volume of each coin?
Answer:
10,30,40,50 and above
The average volume of each of the coin is 2.5 × 10⁻⁶m³.
Given the data in the question;
Number of coin; [tex]n_c = 10[/tex]Initial volume; [tex]v_1 = 75ml = 7.5*10^{-5}m^3[/tex]Final volume; [tex]v_2 = 100ml = 1.0*10^{-4}m^3[/tex]To determine the average volume of each coin, we calculate change in volume after the coins were dropped into the graduated cylinder.
[tex]\delta V = v_2 - v_1\\\\\delta V = 1.0*10^{-4}m^3 - 7.5*10^{-5}m^3\\\\\delta V = 2.5*10^{-5}m^3\\[/tex]
Hence, [tex]\delta V = volume\ of\ the\ 10 coins[/tex]
Now, volume of each of the coins will be;
[tex]V_{each\ coins} = \frac{\delta V}{n_c} \\\\V_{each\ coins} = \frac{2.5*10^{-5}m^3}{10} \\\\V_{each\ coins} = 2.5*10^{-6}m^3[/tex]
Therefore, the average volume of each of the coin is 2.5 × 10⁻⁶m³.
Learn more: https://brainly.com/question/10196945
3. Now use the brown knob at the opening of the hose to adjust the angle at which water comes out. When water comes out at an angle (instead of going straight up), water does not shoot as high as before. Explain your observations qualitatively.
Answer:
Due to brown knob which controls its angle.
Explanation:
When water comes out at an angle instead of going straight up, water does not shoot as high as before because its speed is controlled by the brown knob in order to throw water in another angle. If we adjust the brown knob present at the opening of hose pipe in a straight angle the water shoot very high because water moves with high pressure and no barrier is present between its way.
sodium is a metal why
Explanation:
Sodium is a chemical element with the symbol Na (from Latin "natrium") and atomic number 11. It is a soft, silvery-white, highly reactive metal. Sodium is an alkali metal, being in group 1 of the periodic table. ... The free metal does not occur in nature, and must be prepared from compounds.
Explanation:
Sodium is an alkali metal, being in group 1 of the periodic table.
in great detail, explain why big chungus is the most powerful being of all? any counter arguments?
Answer:
well for me
Explanation:
I think
Big Chungus is the greatest game know to man currently it is only available on ps4, dispite the fact I am loyal to Xbox I couldn’t help but buy a ps4 for it I have found a review from a Redditor
And also he's presence scared everyi
Answer:
big chungus is not funny, its just a big rabbit.
Explanation:
A homeowner wants some insulation blown into her attic. The original quote was for 16 cm of R-17 rated insulation. If she wants the attic insulated to R-44, what thickness (in cm) does she need to use
Answer: the value of the required thickness is 41.4 cm
Explanation:
Given that;
R1 = 17
R2 = 44
L1 = 16
L2 = ?
we know that, from thermal conductivity formula
P = 1 / R
P = k / L
1 / R = k / L
since k of a distinct material is constant,
we can take
L / R = constant
L1 / R1 = L2 / R2
L1R2 = L2R1
L2 = (L1 × R2) / R1
so we substitute
L2 = (16 × 44) / 17
L2 = 704 / 17
L2 = 41.4 cm
Therefore the value of the required thickness is 41.4 cm
Help me please I’ll give brainliest
Answer:
zoom in
Explanation:
Use the rules for significant figures to find the answer to the following addition problem: "21.4+15+17.17+4.003"
Answer:
57.6
Explanation:
"Significant figures" refer to figures that have an actual contribution to a number's value.
They refer to all digits except those with "leading zero," which means having a zero digit before a specific number. For example, in the number 0234, the significant figures are 234.
The rule for adding and subtracting significant figures is to round off the answer to the least number of decimal places. However, when it comes to multiplying and dividing significant figures, you have round off the answer to the least number of significant digits.
Let's solve.
21.4
+15
17.17
4.003
57.573
Let's now round off to the least number of decimal places, which is the tenths. Since 0.5 is followed by a number greater than 5, we have to round it off to 6. Therefore, the answer is: 57.6
What is the longest wavelength that can be observed in the third order for a transmission grating having 5200 slits/cm?
Answer:
641 nm.
Explanation:
Given that,
A transmission grating has 5200 slits/cm.
We need to find the longest wavelength that can be observed in the third order. Using grating equation as follows :
[tex]d\sin\theta=m\lambda[/tex] ...(1)
d is slit spacing
No fo slit per unit length :
[tex]N={5200}\ slit/cm\\\\=520000\ slits/m[/tex]
We know that, N = 1/d
For longest wavelength, θ = 90°
From equation (1)
[tex]\dfrac{\sin\theta}{m\lambda}=\dfrac{1}{d}\\\\520000=\dfrac{\sin(90)}{3\lambda}\\\\\lambda=\dfrac{1}{520000\times 3}\\\\=6.41\times 10^{-7}\ m\\\\=641\ nm[/tex]
Hence, the longest wavelength in third order for a transmission grating is 641 nm.
9. What happens to the energy stored in oil when you use it to
heat your house?
a. It is used up. b. It is destroyed. c. It is converted to heat
energy. d. It stays exactly the same
Answer:
it's converted to heat energy
Answer:
C. It is converted to heat energy
Explanation:
"Energy can neither be destroyed nor created"
1. A book resting on a shelf was found
to have a gravitational potential energy
of 12 J relative to the ground. If the
book falls to the ground, neglecting air
resistance, what is the kinetic energy of
the book just as it was about to hit the
ground?
Answer:
12J
Explanation:
Right before it hits the ground, the initial potential energy and the final kinetic energy will equal each other due to conservation of energy.
Follow these steps:
A. Place some hot water in the bottom of the bottle and put the ice cube over the opening of the
bottle so that it rests on top and drips into the bottle.
B. Observe carefully what happens over the next 15 minutes. Make a sketch of your experiment
and write down your observations.
Explain your observations using the terms:
condensation
evaporation
solid
Answer:
is this for a project im a little confused
Answer:
Some of the hot water evaporated and became a gas called water vapor and created condensation on the sides of the bottle. It rose to the top of the solid ice cube and the cold cooled the gas turning it back into a liquid.
Explanation:
a water wave has a speed of 23.0 meters/second. if the waves frequency is 0.0680 hertz, what is the wavelength
Answer:
Using the Fundamental Equation of Wave, we have:
Explanation:
define paralax error pls
Answer:
Parallax is a displacement or difference in the apparent position of an object viewed along two different lines of sight, and is measured by the angle or semi-angle of inclination between those two lines.
7. an electron with initial kinetic energy of 6.0 eV encounters a barrier with height 11.0 eV. What is the probability of tunneling if he width of he barrier is a. 0.80 nm b. 0.40 nm.
Explanation:
In quantum tunneling through a brier, the energy of the tunneled particle is same but the probability amplitude is decreased.
The expression for the probability of tunneling is expressed as follows:
[tex]T=16 \frac{E}{U_{0}}\left(1-\frac{E}{U_{0}}\right) e^{-2 \sqrt{\frac{2 m\left(U_{0}-E\right)}{h}} L}[/tex]
Here, T is the transmission probability; E is the kinetic energy, U_{0} is the barrier height, $m$ is the mass of the electron, and L is the width of the barrier.