Answer:
5
Explanation:
An alkyl group is a functional group that contains only hydrogen and carbon atoms. It has the general formula: CnH2n+1.
Since n=2, plug it into the formula.
C2H2(2)+1
=
C₂H₅
Hope that helps.
What are chemical equations used to represent?
Answer:
A chemical equation is the symbolic representation of a chemical reaction. The reactants (the starting substances) are written on the left, and the products (the substances found in the chemical reaction) are written on the right.
Explanation:
pliz mark brainliest
Explanation:
chemical equations are used to represent a certain reaction between reactants to form products.
tide occur in ocean but not in lake why
Answer:
Because while our lakes are Great, they're comparatively much smaller than oceans. And the gravitational pull isn't strong.
When naming covalent compound both the first and second element in the fomula always receive
a prefix to represent the number of each element present in the chemical formula.
Answer:
Yes.
Explanation:
Yes, both the first and second element in the formula of covalent compound always receive a prefix to represent the number of each element present in the formula in order to show the percentage or proportion of each element in the formula of covalent compound. Prefix refers to addition of word, letter, or number at the beginning of something so here number placed in front of element indicates the prefix.
A log has a density of .8 g/cm³. What will happen to this log in freshwater, which has a density of 1.0 g/cm³?
It will sink.
It will float.
It will move deeper.
It will decrease in density.
Explanation:
Objects with a lower density will float while objects with a higher density will sink.
Since 0.8g/cm³ < 1.0g/cm³,
The log will float in freshwater.
What is the definition of a chemical bond?
(A) a mutual repulsion between the nuclei and electrons in two different atoms
(B) a mutual attraction between the nuclei and electrons in two different atoms
(C) a mutual attraction between the nuclei and electrons in a single atom
(D) a mutual repulsion between the nuclei and electrons in a single atom
Answer:
B
Explanation:
bonding is a process of two different atoms sharing electrons for stability and these electrons are attracted by one atom losing it's electrons to another
The balanced equation for the syntheis of Iron (I) oxide is below:
If 5.4 moles of Fe react with 4.7 moles of O2, what is the maximum amount of Fe2O3 (in moles) that can be produced? What is the limiting reactant?
a
3.1 moles of Fe2O3 is the maximum amount that can be produced. Oxygen is the limiting reactant.
b
2.7 moles of Fe2O3 is the maximum amount that can be produced. Iron is the limiting reactant.
c
7.1 moles of Fe2O3 is the maximum amount that can be produced. Oxygen is the limiting reactant.
d
10.8 moles of Fe2O3 is the maximum amount that can be produced. Iron is the limiting reactant.
Answer:
Option B. 2.7 moles of Fe2O3 is the maximum amount that can be produced. Iron is the limiting reactant.
Explanation:
The balanced equation for the reaction is given below:
4Fe + 3O2 —> 2Fe2O3
From the balanced equation above,
4 moles of Fe reacted with 3 moles of O2 to produce 2 moles of Fe2O3.
Next, we shall determine the limiting reactant. This can be obtained as follow:
From the balanced equation above,
4 moles of Fe reacted with 3 moles of O2.
Therefore, 5.4 moles of Fe will react with = (5.4 × 3)/4 = 4.05 moles of O2.
Thus, we can see that only 4.05 moles out of 4.7 moles of O2 given is needed to react completely with 5.4 moles Fe. Therefore, Fe is the limiting reactant and O2 is the excess reactant.
Finally, we shall determine the maximum amount of Fe2O3 produced from the reaction.
In this case, the limiting reactant will be use because it will produce the maximum amount of Fe2O3 as all of it is used up in the reaction.
The limiting reactant is Fe and the maximum amount of Fe2O3 produced can be obtained as follow:
From the balanced equation above,
4 moles of Fe reacted to produce 2 moles of Fe2O3.
Therefore, 5.4 moles of Fe will react to produce = (5.4 × 2)/4 = 2.7 moles of Fe2O3.
Summary:
Limiting reactant => iron (Fe)
Maximum amount of Fe2O3 produce = 2.7 moles
HELP DUE MONDAY!!
Don’t understand
Answer:
Concept: Chemical Analysis
You need to start by graphing the data and then analyzing it.We can see that the horse has a distance in meters of 980 at the end of the 10 seconds hence it is the fastest.The horse line has a linearly representation, while the alternate line has parabolic tendencies towards the end. The steeper line indicates a faster change in time or velocity which results in a greater distance traveled indicating that the horse is faster.*I have confidence you can graph that*Identify the double displacement reaction
2NH3+H2SO4
Answer:
......................
nh42so4
A sample of gas in a balloon has an initial temperature of 42 ∘C and a volume of 1.10×103 L . If the temperature changes to 86 ∘C , and there is no change of pressure or amount of gas, what is the new volume, V2, of the gas?
Answer:
1250L or 1.25*10^3
Explanation:
Use the combined gas law, [tex]\frac{P_{1} V_{1}}{T_{1} }[/tex]=[tex]\frac{P_{2}V_{2}}{T_{2} }[/tex]
Put the value for the temperature(in Kelvin) and volume, and you can just put 1 for P1 and P2 because it stays the same.
I'll assume that you meant to put 1.10*10^3L
When the volume of a gas is
changed from 3.6 L to 15.5 L, the
temperature will change from
°C to 87°C.
Assume that the number of moles and the
pressure remain constant.
Be sure to notice that temperatures are
given in °C!
Answer:
-189.55°C
Explanation:
Given data:
Initial volume of gas = 3.6 L
Final volume of gas = 15.5 L
Initial temperature = ?
Final temperature = 87°C (87+273 = 360 K)
Solution:
The given problem will be solve through the Charles Law.
According to this law, The volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure.
Mathematical expression:
V₁/T₁ = V₂/T₂
V₁ = Initial volume
T₁ = Initial temperature
V₂ = Final volume
T₂ = Final temperature
Now we will put the values in formula.
V₁/T₁ = V₂/T₂
T₁ = V₁T₂ /V₂
T₁ = 3.6 L × 360 K / 15.5 L
T₁ = 1296 L.K / 15.5 L
T₁ = 83.6 K
Kelvin to °C:
83.6 K - 273.15 = -189.55°C
Assume that the total volume of a metal sample is the sum of the volume occupied by the metal ions making up the lattice and the (separate) volume occupied by the conduction electrons. The density and molar mass of the first metal are 911 kg/m3 and 27.7 g/mol, respectively; assume the radius of an ion is 97.3 pm. (a) What percent of the volume of a sample of this metal is occupied by its conduction electrons
Answer:
92.4%
Explanation:
The volume per cubic meter of sodium preoccupy by the sodium ions is
[tex]V_{Na} = n \times V[/tex]
where;
volume (V) of each Na atom = [tex]\dfrac{ 4}{3} \pi r^3[/tex]
Radius of each ion = 97.3 pm = 97.3 × 10⁻¹²
no.of atoms in the sample n = mass of the sample / ( molar mass / NA)
mass of the sample per cubic metre = 911 kg/m³
∴
[tex]V = \bigg [ \dfrac{4}{3} \pi r^3 \bigg ] \bigg [\dfrac{MN_A}{m} \bigg ][/tex]
[tex]V = \bigg [ \dfrac{4}{3} \pi (97.3 \times 10^{-12} )^3 \bigg ] \bigg [\dfrac{ (911 kg/m^3 (m^3))(6.023\times 10^{23})}{27.7 \times10^{-3}\ kg/mol } \bigg ][/tex]
V = 0.07643 m³
The fraction of available conduction electrons are;
= (1 - V)
= 1 - 0.07643
= 0.92357
≅ 92.4%
Because of gravity, your weight
on the Moon
A. would be the same as it is on Earth
B. would be less than your weight on Earth
C. would be more than your weight on Earth
D. and your mass would be less than it is on Earth
Answer:
the answer is b
Explanation:
brcause the gravutational pull on the moon is lower than on earth...
What is the molar mass of sodium bicarbonate, NaHCO3.
Answer:
84.01 g/mol
Explanation:
Look at your periodic table for the atomic mass for Na, H, and C, and O
Na = 22.99
H = 1.01
C = 12.01
O = 16.00
They are three oxygen atoms. So 16(3) = 48
Now do basic math.
22.99 + 1.01 + 12.01 + 16.00(3) = 84.01 g/mol.
Literally found this in a YouTuube video lol. Hope it helped doe!
The molar mass of sodium bicarbonate (NaHCO₃) is approximately 84.01 grams per mole (g/mol).
To calculate the molar mass of sodium bicarbonate (NaHCO₃), you need to sum the atomic masses of all the atoms in the chemical formula.
The atomic masses:
Sodium (Na) = 22.99 g/mol
Hydrogen (H) = 1.01 g/mol
Carbon (C) = 12.01 g/mol
Oxygen (O) = 16.00 g/mol
Now, let's calculate the molar mass of NaHCO₃:
Molar mass of NaHCO₃ = (1 * Na) + (1 * H) + (1 * C) + (3 * O)
Molar mass of NaHCO₃ = (1 * 22.99 g/mol) + (1 * 1.01 g/mol) + (1 * 12.01 g/mol) + (3 * 16.00 g/mol)
Molar mass of NaHCO₃ = 22.99 g/mol + 1.01 g/mol + 12.01 g/mol + 48.00 g/mol
Molar mass of NaHCO₃ = 84.01 g/mol
Therefore, the molar mass of sodium bicarbonate (NaHCO₃) is approximately 84.01 grams per mole (g/mol).
Learn more about molar mass from the link given below.
https://brainly.com/question/31545539
#SPJ6
Q. Which change has a negative entropy change of the system
A)Ice smell
B)Water heating up
C)Salt dissolving
D) none of these
Answer:
D) none of these
Explanation:
When solid S1 is heated, it breaks up into gas G and another solid S2. The solids S1 and S2 and the gas G are all pure substances. On the basis of this information alone, which substance or substances must be compounds? A.S1 only B.S2 only C.S1 and S2 D.S1 and G
Answer:
A.S1 only
Explanation:
A compound is one of the pure substances (other being element) that forms when two or more atoms of an element are chemically combined. According to this question, a solid S1 is heated and it breaks up into gas G and another solid S2 as follows:
S1 (s) ➡ G (g) + S2 (s)
Based on the information in the questio, the solids S1, S2 and the gas G are all pure substances. However, since solid S1 broke down into two other pure substances, it means solid S1 is originally a chemical combination of both products, which denotes a COMPOUND. Note that Gas G and Solid S2 are most likely elements.
What type of minerals make up more than 90% of the earth's crust?
sulfites
silicates
stalagtites
hematites
Answer:
Rocks
Explanation:
Answer:
silicate
Explanation:
why do chemist synthesize polymers in the lab?
The reason why chemists synthesize polymers in the lab is;
because of the need to perform and observe the results of a variety of synthesized polymer reactions and to predict when a reaction will happen.
Polymers are simply defined as a substance or material made up of long repeating chemical chains of molecules.
Now, polymer synthesis is simply called polymerization and it is the process by which smaller molecules called monomers undergo covalent bonding to form a longer polymer chain.
Now, from the definition above, the reason why chemists synthesize polymers in the lab is because of the need to perform and observe the results of a variety of synthesized polymer reactions and to predict when a reaction will happen.
Read more at; https://brainly.com/question/15994643
How many moles of O2 are needed to react
with 24 moles of C2H6?
2C2H6 + 702 — 4CO2 + 6H20
Explanation:
Mole ratio of Ethane to Oxygen = 2 : 7
Moles of O2 needed = 24 moles * (7/2) = 84 moles.
Moles are the ratio of the mass and the molar mass of the substance. 84 moles of oxygen are needed to react with Ethane.
What are moles?Moles are the unit of the measurement of small entities like molecules, atoms, or particles.
The reaction is shown as:
[tex]\rm 2C_{2}H_{6} +7O_{2} \rightarrow 4CO_{2} + 6H_{2}O[/tex]
From the reaction, it can be said that the mole ratio of ethane [tex](\rm C_{2}H_{6})[/tex] and oxygen [tex](\rm O_{2})[/tex] is 2:7.
Then moles of oxygen will be,
[tex]24 \times \dfrac{7}{2} = 84[/tex]
Therefore, 84 moles of oxygen are needed to react with 24 moles of ethane.
Learn more about moles here:
https://brainly.com/question/11445589
In a molecule of calcium sulfide, calcium has two valence electron bonds, and a sulfur atom has six valence electrons. How many lone pairs of electrons are present in the Lewis structure of calcium sulfide?
A. one
B. two
C. three
D. four
E. none
Answer:
E.none
Explanation:
because the bonds join with each other and no lone pair is left
How do you draw the Lewis structure of compound with an ionic bond
Answer:
[Na]^+ [Cl]^-
Explanation:
Lets say its sodium, its number of electrons is 11, but when its stable (an ion), it is 10. and chloride, number of electrons is 17, but when its stable (an ion) it is 18. So the lewis structure for that is, remember with the straight brackets (not sure what it's called, but you know what I mean I guess) its this one: [ ]
Sodium will be + because it has more protons (11-10 = +1), and chloride will be - because it gained an electron, so has more electrons than protons (17-18 = -1)
So the lewis structure would be:
[Na]^+ for sodium
and
[Cl]^- for chlorine
Sodium chloride:
[Na]^+ [Cl]^-
Also just to add, only 1 of each atom (Na and Cl) was needed for the bonding, but if let's say example; 2 Cl was needed to bond with sodium, there would be 2 Cl (same) and 1 Na.
What is another name for acetic acid? *
1. lemons, limes or oranges
2 .vinegar
3. vitamin C
A typical home instant pot has an internal volume of 6.5 Liters. If the steam inside an instant pot with an internal pressure of 191.0 kPa and a temperature of 750.0 K was released into the atmosphere at 101.3 kPa and 298K, what volume with the steam occupy in the atmosphere?
28. After 3 substances are mixed, an odor emits
a. chemical change
b. physical change
c. thermal energy is used
a do
Answer:
a. chemical change
Explanation:
A chemical change can cause an odor, however a physical change cannot, and the use of thermal energy will only make an object colder, not give it an odor.
Which statement is true about copper and salt?
for tour substances.
Melting and Boiling
Points of Substances
Name
Melting Boiling
Point (°C) Point (°C)
-101
-35
-210
- 196
Chlorine
Nitrogen
Oxygen
Hydrogen
-218
183
-259
-253
Which substance is a solid at -200°C?
which is a way to express concentration of a solution? parts per billion moles molar mass force per square meter
Answer:
parts per billion
Explanation:
I took the quiz
Answer:
parts per billion
Explanation:
edge 2021
HELP 20 POINTS
What is the frequency of an Electromagnetic wave has with wavelength 2.94 x 10^-8 cm?
An object with a
mass of 7 g and a
volume of 10 mL is
most likely what
substance?
Answer:
Ethanol
Explanation:
Given parameters:
Mass of the object = 7g
volume of the object = 10mL
Unknown:
The kind of substance it is = ?
Solution:
Since from the parameters, we can determine the density of the object. Density is an intensive property of substances.
So, we simply find the density and check a density table for the type of substance it is.
Density is the mass per unit volume.
Density = [tex]\frac{mass}{volume}[/tex]
Let us take the volume to cm³;
10mL = 10cm³
Density = [tex]\frac{7}{10}[/tex] = 0.7g/cm³
This is most likely ethanol
Would a highly conductive, malleable, and lustrous solid be a metal, nonmetal, or metalloid?
Which is a factor that keeps Earth in orbit around the Sun? the moon O the gravitational pull of the Sun the continuous motion of the universe Earth's changing speed and direction ctivity
Answer:
The Sun's gravitational pull keeps our planet orbiting the Sun. The motion of the Moon is affected by the gravity of the Sun AND the Earth. The Moon's gravity pulls on the Earth and makes the tides rise and fall every day. As the Moon passes over the ocean, there is a swell in the sea level.
Explanation:
The statement of factor that keeps Earth in orbit around the Sun is "the gravitational pull of the Sun."
What is the Sun and the Earth?The Sun is the primary star of our Solar System. The Earth revolves around our Sun, which really is a star. At a distance of around 93 million miles from the Sun, Earth is the third planet.
The fundamental force that governs the planets' orbits around the sun is gravity. While each planet does have its own gravity, which is determined by its size and speed of movement, orbit is determined by the gravity of the sun.
Our planet orbits the Sun due to it's gravitational pull. The Sun, as well as all of the planets and moons, are gravitationally bound together and circle all around solar system's centre of gravity.
The Sun's gravity is around 27.9 times that of Earth's, and it helps to govern the tides on Earth in a modest degree.
Hence the correct answer is the gravitational pull of the Sun.
Learn more about Sun and Earth here
https://brainly.com/question/2545441
#SPJ2