Answer:
We are required to analyze the conservation of kinetic energy in a perfectly inelastic collision.
kinetic energy:K=1/2mv²
momentum:p=mv
Explanation:
Using the equations for final velocity in terms of masses and initial velocity for a perfectly inelastic collision, work out the final kinetic energy. Calculate the initial kinetic energy and show that kinetic energy is not conserved. Use variables, no numbers
You need to follow law of conservation of energy
Energy is neither created nor destroyedWe know
Kinetic Energy=mass(Velocity)^2You may use momentum formula mass×velocity
In both you need to form equations then solve for final velocity
Please answer the following question!
What is the momentum of a 750-kg Volkswagen Beetle when at rest?
Please give the value and momentum!
Answer:
0
Explanation:
the momentum will always be 0 when it is at rest because the object isnt moving!
Hope this helped!
A 570 kg elevator accelerates downwards at 1.5 m/s2 for the first 13 m of its motion.
Part A
How much work is done during this part of its motion by the cable that lowering the elevator? Neglect any friction or air resistance.
Answer:
11115 J
Hope you could get an idea from here.
Doubt clarification - use comment section.
haun wants to enter the science fair at his school. he has a list of ideas for his project. which questions could be answered through scientific investigations. check all that apply
Correct Answer:
- Does pressure have an effect on the volume of a gas?
- Which brand of soap is the best for cleaning grease off dishes?
When Magnesium and Fluorine react what type of bond is formed
A) Metallic
B) Ionic
C) Covalent
D) Diatomic
Answer:
hi your answer should be B
Explanation:
Hope this helps!
Answer:
ionic
Explanation:
two metals that bond are considered ionic bonds
Classify the statement below as either Speed or Velocity?
A jeep was driving 40 mph
heading to the grocery store.
Answer:
Hello There!
It is Speed.
[tex]\Large\bold\red{Reason}[/tex]
Because in the question it is said that at which speed car is travelling.
Speed is a scalar quantity.
If it is velocity then first know this that it is a vector quantity.
It must include both magnitude and direction.
If it is velocity then it would be 40 mph east or west or north or south.
I hope it is helpful to you...Cheers!_____________how far will an object fall in 3 seconds
Answer:
144.7832 ft
Explanation:
heres the formula i found to solve
v = v₀ + gt
where:
v₀ is the initial velocity (measured in m/s or ft/s);
t stands for the fall time (measured in seconds); and
g is the free fall acceleration (expressed in m/s² or ft/s²).
Without the effect of air resistance, each object in free fall would keep accelerating by 9.80665 m/s (approximately equal to 32.17405 ft/s) every second. In reality, though, a falling object's velocity is constrained by a value called the terminal velocity.
im sorry i couldnt provide more information, but there was not much info provided in the question itself
what is the horse power of an electric motor which can do by 1250 joule of work in 5 seconds
what are the main component of network
Answer:
A network has 5 basic components viz. clients, servers, channels, interface devices and operating systems.
Write AT LEAST 10 SENTENCES based on ONE event that has happened in your life.
Please do it am so tired
Sorry your tired, ill try to make it worth reading.
One day I walked outside, I looked around. THEN BAM a wasp lands right on my face. Its hideously sharp stinger impaled my flesh. I could almost hear it going deeper and deeper. I screamed and ran around in circles until it finely flew away. As I started walking to the door I could feel my heart pules where the thing had stung. I opened the door and went into the bathroom. Right in the middle of my face just above my nose was a red dot, with a slightly less red ring around it, like an ateroid impact. I sat down and went over the entire event five times. I decided to go back outside, as I walked around the corner, another wasp landed on me.
ignoring air resistance, an object falling toward the surface of the earth has a velocity that is
What force is responsible for how magma flows and rocks stack up on top of one another?
Question 6 options:
Electroweak and Strong
Nuclear
Electromagnetic
Gravitational
Gravitational Force
Explanation:-
The magma flows through the gap between the rocks which are stacked up on top of one another.
The gravity attracts the magma to do that.
Also the rocks are stacked because of the gravitational force between them
Hence Option D is correct
Hope it helps
Answer:
pls mark me as brainliest
Explanation:
last one
A 3.1 kg carton's GPE was increasing by 7.8 J as it was lifted above the ground. How high was it lifted?
Answer:it was lifted
Explanation:
by me lifting it because i can life it very high
why can you predict how the moon will change appearance from day to day
As the Moon orbits our planet, its varying position means that the Sun lights up different regions, creating the illusion that the Moon is changing shape over time. This is because it rotates once on its axis in exactly the same time it takes to orbit Earth – 27 days and seven hours
how to prove the first linear motion
Answer:
Then solve for v as a function of t. This is the first equation of motion . It's written like a polynomial — a constant term (v0) followed by a first order term (at). Since the highest order is 1, it's more correct to call it a linear function.
Explanation:
1. An 80 kg skydiver uses a parachute to produce an applied force of 700 N while falling with an initial
velocity of 40 m/s
Time taken by the skydiver to land on the ground is 4.57 seconds
The applied force, F = 700 N
The mass of the skydiver, m = 80 kg
The velocity, v = 40 m/s
To calculate the time taken by the skydiver to fall to the ground will be calculated using the formula
[tex]F=\frac{mv}{t}[/tex]
Substitute F = 700, m = 80, and v = 40 to solve for t
[tex]700=\frac{80(40)}{t}\\\\700t=3200\\\\t=\frac{3200}{700}\\\\t=4.57 s[/tex]
Time taken by the skydiver to land on the ground is 4.57 seconds
Learn more here: https://brainly.com/question/25898421
A 150 g sample of brass at 100 °C is placed in a Styrofoam cup of water containing 120 mL of water at 10 °C. No heat is lost to the cup or surroundings. What is the final temperature of the mixture? answer in celsius
Answer:
≈19.144°C.
Explanation:
all the details are in the attachment.
Note, that c₁, m₁, t₁ are the parameters of the sample of brass; c₂, m₂ and t₂ are the parameters of the sample of water.
P.S. change the provided design according Your requirements.
Starting with only the Balmer series light (visible light), how could we ensure that the solar panels generate a current that Mark can use for his power station? (It may help to look at the electromagnetic spectrum from week 3):.
We can ensure that the solar panels generate a current that Mark can use for his power station is by gradually increasing the brightness (amount) of light that we reflect on it.
Solar panel are photo-voltaic module or cells which means they uses sunlight as a source of energy to generate current.
when the sun rays hit a silicon crystal of the solar panel then the electron inside of the solar panel start to charge and travel rapidly. when such charged electron flow through the circuit then the solar panel generate electricity.
So, to optimize the electricity generation, the energy of light is to be maximized which is determined by the frequency of the source.
Hence, To ensure that the solar panels generate a current that Mark can use for his power station we need to gradually increase the brightness (amount) of light that we reflect on it.
For more information visit to:
https://brainly.com/question/10294734
1. Which of these is not a spherical mirror?
a) Concave mirror
b) Convex mirror
c) Plane mirror
d) None of these
Answer:
C.Plane mirror this is the answer of this question.
None of the above. That is option D.
A spherical mirror is defined as a mirror that has a surface that reflects curved rays. It is also called a curved mirror.
Types of spherical mirror include:
Concave mirror: This has a reflective surface that is curved inward and away from the light source. It reflects light inward to one focal point.Example of concave mirror are Torch lights and automobile headlights.
Convex mirror: These are the spherical mirror that reflects light outwards and towards the light source.Example of convex mirror is the magnifying glasses and telescopes.
Plane mirrors: This is a type of spherical mirror with a flat surface. Reflection of light occurs in plane mirror but it's center of curvature is infinite because it's flat.Therefore, concave, convex and plane mirrors are all examples of a spherical mirror.
Learn more about plane mirrors here:
https://brainly.com/question/3459308
a truck in a traffic circle travels in a circular path at constant speed v0 while passing through region x of the circle, as shown in figure 1 above. a diagram representing the forces exerted on the truck in region x is shown in figure 2. at a later time a car with less mass than the truck passes through region x at the same speed and the same distance from the center of the traffic circle as the truck. the coefficient of friction between the car’s tires and the ground is the same as that for the truck’s tires and the ground. which of the following diagrams could represent the forces exerted on the car in region x compared to the truck in region x ? assume that the length of each arrow is proportional to the magnitude of the force represented by the arrow.
The Diagram that represents the forces exerted on the car in region x when compared to the truck in region X is : Diagram C
Given that the mass of the car is less than the mass of the truck the force due to gravity will be greater on the truck than it could be on the car
i.e. | Fg |car < | Fg | truck
also : | Fₙ | car < | Fₙ | truck
Since the gravitational force on the car is less than the gravitational force on the truck
| Ff | car < | Ff | truck
where : Ff = frictional force
Fg = force due to gravity
Fn normal force
Therefore from the diagrams attached below the correct diagram that represents the forces exerted on the car in region x when compared to the truck in region X is : Diagram C.
Learn more about gravitational force : https://brainly.com/question/1550731
Attached below is the missing data related to your question
Why does gravity on Earth have a stronger attraction with you than the sun has with you? Plsssssss help I really need this rn
Answer:
Although the Earth has a lesser mass than the Sun, it is far closer to you, allowing for a stronger pull.
Explanation:
why does the earth get more energy from the sun than from all the other stars in the universe combined
Answer:
Explanation:
The sun is much closer than the other stars
What does the diagram show about X and Y?
A They have the same mass and the same volume but different weights.
B They have the same mass and the same weight but different volumes.
C They have the same mass, the same volume and the same weight.
D They have the same weight and the same volume but different masses.
Answer: answer is c rest of explanation is in the comments
when do magnets have the most potential energy
Answer:
Explanation:
Permanent magnets do have potential energy, stored in their magnetic field. That energy can be compared to the potential energy of some compressed spring. See the picture below, representing the magnetic field lines of a magnetized sphere : These lines are compressed inside the magnet.
A hockey player hits a rubber puck from one side of the rink to the other. It has a mass of .170 kg, and is hit at an initial speed of 6 m/s. If the rink is 61 meters long, how fast is the puck moving when it hits the far wall?
By using third law of equation of motion, the final velocity V of the rubber puck is 8.5 m/s
Given that a hockey player hits a rubber puck from one side of the rink to the other. The parameters given are:
mass m = 0.170 kg
initial speed u = 6 m/s.
Distance covered s = 61 m
To calculate how fast the puck is moving when it hits the far wall means we are to calculate final speed V
To do this, let us first calculate the kinetic energy at which the ball move.
K.E = 1/2m[tex]U^{2}[/tex]
K.E = 1/2 x 0.17 x [tex]6^{2}[/tex]
K.E = 3.06 J
The work done on the ball is equal to the kinetic energy. That is,
W = K.E
But work done = Force x distance
F x S = K.E
F x 61 = 3.06
F = 3.06/61
F = 0.05 N
From here, we can calculate the acceleration of the ball from Newton second law
F = ma
0.05 = 0.17a
a = 0.05/0.17
a = 0.3 m/[tex]s^{2}[/tex]
To calculate the final velocity, let us use third equation of motion.
[tex]V^{2}[/tex] = [tex]U^{2}[/tex] + 2as
[tex]V^{2}[/tex] = [tex]6^{2}[/tex] + 2 x 0.3 x 61
[tex]V^{2}[/tex] = 36 + 36
[tex]V^{2}[/tex] = 72
V = [tex]\sqrt{72}[/tex]
V = 8.485 m/s
Therefore, the puck is moving at the rate of 8.5 m/s (approximately) when it hits the far wall.
Learn more about dynamics here: https://brainly.com/question/402617
plssss helppppppppppp i need it
Answer:
D
Explanation:
I don't know how to explain it I just did it
By the way thxs for help on one of my problems
what is the most likely reason for the difference between how the compass works on earth and on the moon?
Answer: A compass taken to Earth's moon does not point in a specific direction on the moon. The moon does not have a strong magnetic field.
Mars is 7.83x10^10m [^10 is an exponent] from planet earth. The planet Earth is 5.98x10^24kg [^24 is an exponent] while Mars has a mass of 6.42x10^23kg [^23 is an exponent]. What is the gravitational attraction between the two planets? G=6.67×10^-11 (-11 is an exponent)
Answer:
Approximately [tex]4.18 \times 10^{16}\; \rm N[/tex].
Explanation:
Consider two objects of mass [tex]m_{1}[/tex] and [tex]m_{2}[/tex]. Let [tex]r[/tex] denote the distance between the center of mass of each object. Let [tex]G[/tex] denote the gravitational constant. ([tex]G \approx 6.67 \times 10^{-11}\; {\rm m^{3}\cdot kg^{-1}\cdot s^{-2}}[/tex].)
By Newton's Law of Universal Gravitation, the size of gravitational attraction between these two objects would be:
[tex]\begin{aligned}F &= \frac{G\, m_{1}\, m_{2}}{r^{2}}\end{aligned}[/tex].
In this question, [tex]m_{1} = 5.98\times 10^{24}\; {\rm kg}[/tex] and [tex]m_{2} = 6.24 \times 10^{23}\; {\rm kg}[/tex] are the mass of the two planets. The distance between the two planets is [tex]r = 7.83 \times 10^{10}\; \rm m[/tex] (approximately the same as the distance between the center of mass of planet Earth and the center of mass of Mars.)
Apply Newton's Law of Universal Gravitation to find the size of gravitational attraction between the two planets:
[tex]\begin{aligned}F &= \frac{G\, m_{1}\, m_{2}}{r^{2}} \\ &= \frac{1}{(7.83 \times 10^{10}\; {\rm m})^{2}} \\ &\quad \times (6.67 \times 10^{11}\; {\rm m^{3} \cdot kg^{-1} \cdot s^{-2}}) \\ &\quad \times (5.98 \times 10^{24}\; {\rm kg}) \\ &\quad \times (6.42 \times 10^{23}\; {\rm kg}) \\ &\approx 4.18 \times 10^{16}\; {\rm kg \cdot m \cdot s^{-2}} \end{aligned}[/tex].
Since [tex]1\; {\rm kg \cdot m \cdot s^{-2}} = 1\; {\rm N}[/tex], the size of gravitational attraction between the two planets would be approximately [tex]4.18 \times 10^{16}\; {\rm N}[/tex].
how can I make a square fit in a triangle hole
cut the square and make it a triangle
hi i need some help with this.....
Answer: D
Explanation: moogle helps lol.
A diffraction grating is 1.50 cm wide and contains 2000 lines. When used with light of a certain wavelength, a third-order maximum is formed at an angle of 20.0°. What is the wavelength (in nm)?
Answer:
because of the gravity of the earth