Answer:
The Moment of a force is a measure of its tendency to cause a body to rotate about a specific point or axis. This is different from the tendency for a body to move, or translate, in the direction of the force. In order for a moment to develop, the force must act upon the body in such a manner that the body would begin to twist. This occurs every time a force is applied so that it does not pass through the centroid of the body. A moment is due to a force not having an equal and opposite force directly along it's line of action.
Imagine two people pushing on a door at the doorknob from opposite sides. If both of them are pushing with an equal force then there is a state of equilibrium. If one of them would suddenly jump back from the door, the push of the other person would no longer have any opposition and the door would swing away. The person who was still pushing on the door created a moment.
Explanation:
hope it helps you
A mortar shell is accidentally shot straight up with an initial speed of 147 m/s. How long does it take for the shell to reach its maximum height? How high does the shell rise? If the shell falls straight down after is stops, what is its velocity when it hits the ground? What is the total time the shell is in the air?
Answer:
1) t ≈ 14.985 seconds
2) The maximum height reached ≈ 1101.4 meters
3) The velocity with which it hits the ground = 147 m/s
4) The total time in the air ≈ 29.969 seconds
Explanation:
1) The given information are;
The initial velocity of the mortar shell = 147 m/s
The direction of the mortar shell = Vertically upwards
Therefore, we have, from the equation of motion
v = u - g·t
Where;
v = The final velocity = 0 at maximum height
u = The initial velocity = 147 m/s
g = The acceleration due to gravity = 9.81 m/s²
Therefore, we have;
0 = 147 - 9.81 × t
9.81 × t = 147
t = 147/9.81 ≈ 14.985 seconds
t ≈ 14.985 seconds
2) From the equation of motion, v² = u² - 2×g×s
Where;
s = The maximum height reached
We have;
0² = 147² - 2×9.81×s
2×9.81×s = 147²
s = 147²/(2×9.81) ≈ 1101.4 meters
The maximum height reached ≈ 1101.4 meters
3) The velocity with which it hits the ground is equal to the initial velocity = 147 m/s
4) The total time in the air = 2 × The time it takes to reach maximum height
The total time in the air = 2 × 14.985 ≈ 29.969 seconds
The total time in the air ≈ 29.969 seconds
Calculate the work done by the cyclist when his power output is 200 W for 1800 seconds.
Answer:
3.6 × 10^5 J
Explanation:
Work Done = Energy
Energy = Power × time
Energy = 200 × 1800
= 360000 J
W =
[tex]3.6 \times 10 {}^{5} j[/tex]
this is due by 11.00 pm send some help pls!!!!
Your science teacher presents you with a circuit model that contains five light bulbs, a switch, and a 1.5-volt battery. The wires of the circuit are hidden from your view so that you cannot see how the bulbs are connected to the battery. How could you determine the type of circuit used in this model?
A.
If all the bulbs are equal brightness, it is a series circuit because each bulb in a series circuit has the same resistance.
B.
If all the bulbs are equal brightness, it is a parallel circuit because each bulb in a parallel circuit has its own path to the battery.
C.
If you unscrew one bulb and all the others stay lit, it is a parallel circuit because each bulb in a parallel circuit has its own path to the battery.
D.
If you unscrew one bulb and all the others stay lit, it is a series circuit because each bulb in a series circuit have to share the same current.
Answer:
C
Explanation:
PLACING BULBS IN SERIES
Increasing the number of bulbs decreases the brightness of the bulbs.
The resistance increases. In a series circuit, adding bulbs increases the resistance in the circuit. A complete circuit requires the electrons to move from the negative terminal of the battery to the positive terminal. When one bulb is unscrewed it opens the circuit preventing a complete circuit and the electrons cannot return to the battery.
PLACING BULBS IN PARALLEL
Two bulbs in parallel are brighter than two bulbs in series. In a parallel circuit each bulb is in its own circuit. As bulbs are added the resistance in the circuit decreases since each circuit is another pathway for electrons to move from one end of the circuit to the other.
If you unscrew one bulb and all the others stay lit, it is a parallel circuit because each bulb in a parallel circuit has its own path to the battery.
What is bulbs in series combination?The brightness of the bulbs reduces as the number of bulbs increases in series. Resistance rises in intensity. Adding bulbs to a series circuit raises the circuit resistance. The electrons must pass from the battery's negative to positive terminals in order for the circuit to be complete. When one bulb is removed, the circuit is broken, making it impossible for the electrons to return to the battery.
What is bulbs in parallel combination?In comparison to two bulbs in series, two bulbs in parallel are brighter. Each bulb is in its own circuit when the circuits are parallel. As more bulbs are added, the resistance in the circuit reduces because each additional circuit provides an additional route for electrons to travel from one end to the other.
You can determine the type of circuit used in this model by unscrewing one bulb and all the others stay lit, it is a parallel circuit because each bulb in a parallel circuit has its own path to the battery. Hence, option(C) is correct.
Learn more about parallel combination here:
https://brainly.com/question/14547003
#SPJ2
A hockey puck sliding on a frozen lake comes
to rest after traveling 176 m.
If its initial velocity is 2.3 m/s, what is its
acceleration
Given parameters:
Distance traveled = 176m
Initial velocity = 2.3m/s
Unknown:
Acceleration = ?
Solution:
Acceleration is the change in velocity with time. To solve this problem, we apply one of the motion equations;
V² = U² + 2as
where V is the final velocity
U is the initial velocity
a is the acceleration
s is the distance
final velocity is 0;
0² = 2.3² + 2 x a x 176
-5.29 = 352a
a = - [tex]\frac{5.29}{352}[/tex] = - 0.015m/s²
A population of lobsters was recently exposed to a new disease. Which type of limiting factor is this disease and what will be its predicted impact on the carrying capacity of this population? Group of answer choices density independent; the carrying capacity will increase density dependent; the carrying capacity will decrease density dependent; the carrying capacity will increase density independent; the carrying capacity will be reduced
Answer:
the carrying capacity will decrease density dependent
Explanation:
The limiting factor of the disease is density dependent and will decrease the carrying capacity of the population because the disease that affect the population operate when the number of organisms in per unit area get to a specific level , it's affected the population when the population per unit are reached a certain level and the disease decrease the carrying capacity of the population. Carrying capacity is the average population size of organisms in an habitat. As the lobsters population is affected by disease, the population sizes reduced because many of the lobsters would of died and inactive, thereby causing a reduction in the size and capacity.
How far does light travel in 13 s?
Answer:
2,421,666 miles
Explanation:
light travels 186,282 miles per second in a vaccum.
So 186,282 × 13 = 2,421,666
Find the magnitude and direction of the net gravitational force on mass A due to masses B and
C in the figure. Each mass is 2 kg.
a. 2.8x10^-8N, to the right
b. 2.54x10^-8N, to the right
c. 3.4x10^-8N, to the left
d. 3.4x10^-8N, to the right
Answer is A 2.8 x 10^-8 N, to the right
The net gravitational force on mass A due to masses B and C is required.
The correct option is a. [tex]2.8\times 10^{-8}\ \text{N}[/tex] to the right.
G = Gravitational constant = [tex]6.674\times 10^{-11}\ \text{Nm}^2/\text{kg}^2[/tex]
[tex]r_{AB}[/tex] = Distance between A and B = 0.4+0.1 = 0.5 m
[tex]r_{AC}[/tex] = Distance between A and C = 0.1 m
[tex]m_A=m_B=m_c[/tex] = Mass of each particle = 2 kg
The required force is
[tex]F_A=F_{AB}+F_{AC}\\ =\dfrac{Gm_Am_B}{r_{AB}^2}+\dfrac{Gm_Am_C}{r_{AC}^2}\\ =Gm^2\left(\dfrac{1}{r_{AB}^2}+\dfrac{1}{r_{AC}^2}\right)\\ =6.674\times 10^{-11}\times 2^2\left(\dfrac{1}{0.5^2}+\dfrac{1}{0.1^2}\right)\\ =2.8\times 10^{-8}\ \text{N}[/tex]
The magnitude of force will be [tex]2.8\times 10^{-8}\ \text{N}[/tex]
The direction will be towards the right since C is closer to A.
Learn more:
https://brainly.com/question/1835915
https://brainly.com/question/7038796
A movie director creates a scene in which people on Spaceship #1 can see approach of Spaceship #2 and hear its engines. The director
hires a scientist to review the scene.
What should the scientist tell the director?
A .The scene needs no changes because light and sound waves can both travel through space.
B. The scene needs changes because neither light waves nor sound waves can travel through space.
C. The scene needs changes because sound waves can travel through space, but light waves cannot.
D. The scene needs changes because light waves can travel through space, but sound waves cannot.
A,B,C or D plz answer !
Answer:
It is D.
Explanation:
Sound travels by the movement of particles bumping against each other and if there is no particles in a vacuum(space) then there is no sound. Light can travel through space because it doesn't need to travel by/through particles.
A dolphin can swim at a constant speed of 12.5 m/s. How
long does it take a dolphin to swim 45 meters?
Answer:
[tex]\boxed {\tt 3.6 \ seconds}[/tex]
Explanation:
Time can be found by dividing the distance by the speed.
[tex]t=\frac{d}{s}[/tex]
The distance is 45 meters and the speed is 12.5 meters per second.
[tex]d= 45 \ m \\s= 12.5 \ m/s[/tex]
[tex]t=\frac{45 \ m}{12.5 \ m/s}[/tex]
Divide. Note that the meters, or "m" will cancel each other out.
[tex]t=\frac{45 }{12.5 \ s}[/tex]
[tex]t=3.6 \ s[/tex]
It will take the dolphin 3.6 seconds to swim a distance of 45 meters are 12.5 meters per second.
Answer:3.6 seconds
Explanation: 45/12.5 m/s is 3.6s
what is quantum physics and what is the equation for space time and travel?
Answer:
Im not smart
Explanation:
but im your bff
Answer:
it explain how everythings work you should work with the speed of light multiply with the distance of the equator
What is the process called when heat is added to a liquid? What does the liquid become?
Answer:
evaporation
Explanation:
when the liquid is heated it evaporates until it becomes air
Within only a few seconds, Ana determines that she does not wish to be at this fraternity party and makes a hasty exit back
to her dorm. Which of the following was responsible for Ana's immediate, intuitive reactions to this "frat party"?
a. left brain
b. reflex arc
C. cognitive unconscious
d. righ brain
Answer:
left brain the left brain is your rapid more irrisponsibe side while your right cortex thinks about the potential outcomes
A machine produces a larger force than you exert to operate the machine. How does this input distance of the machine compare to its output distance?
Answer:
Because the output force is greater than the input force, the input distance must be greater than the output distance.
Explanation:
A heavy log will float on water
because:
A. It is less dense than water
B. It weighs less than water
C. It is more dense than water
D. It weighs more than water
Answer:
A it is less dense than water
Explanation:
The density, of a substance is its mass per unit volume
1. Explain a stretching routine for your work environment. As you consider your routine, keep in mind the specific individuals within your work environment who will be using this plan. How will you account for differences in sizes, ages, and cultures?
Answer:
Explanation:
A stretching routine should target most of the main muscles in the body and at least one stretching exercise per section of the body. Also in a work environment since individual's sizes, ages, and cultures vary you should design a routine that is for beginners and very easy and effective. Regardless, each individual should be able to move at their own pace and push as far as they are physically able. One such routine would be the one in the attached picture below which targets all major areas, is easy and effective. It starts at the neck muscles and works its way down the arms, back, and legs.
what is the difference between a parallel connection and series connection
Answer:
here lol
Explanation:
Answer:
when the connection of the batteries is parallel negative to negative n positive to positive is called parallel connection
Explanation:
A sound wave ________ and ______ the air molecules around your ear.
Group of answer choices
moves and shakes
compresses, expands
vibrates and heats up
Answer:
compresses and expands
Answer:
compreses and expands
Explanation:
because it is
What is the speed of a snail moving at a rate of 3 inches per minute in [m/s]? Recall that 1 [m] = 39 [in]. Round to the nearest ten thousandth (4 places after the decimal).
Answer:
0.0013 m/s
Explanation:
Speed in inches per minute = 3 inches per minute
Speed in m/s =?
Next, we shall convert 3 inches per minute (3 in/min) to metre per minute.(m/min)
39 in/min = 1 m/min
Therefore,
3 in/min = 3 in/min × 1 m/min / 39 in/min
3 in/min = 1/13 m/min
Finally, we shall convert 1/13 m/min to m/s. This can be obtained as follow:
1 m/min = 1/60 m/s
Therefore,
1/13 m/min = 1/13 m/min × 1/60 m/s / 1 m/min
1/13 m/min = 1/780 m/s
1/13 m/min = 0.0013 m/s
Thus, 3 in/min is equivalent to 0.0013 m/s.
Therefore the speed of the snail in m/s is 0.0013 m/s
why do people have a virgna
Answer: For many things, like reproduction and releasing bad bacteria.
Explanation: We all have our parts, but what’s most important is our private parts. It helps us to use the restroom, and release the bad bacteria, without it, we’d die from holding it in! But also, it helps the world grow, because to reproduce we need those parts.
What is the average speed of the boat between 4 and 6 minutes?
Answer:
[tex] the \: average \: speed \: of \: the \: boat \: between \: 4 \: and \: 6 \: \\ minutes \: = \frac{1000 - 500}{6 - 4} = \frac{500}{2} = 250[/tex]
note: cant really see the measuring units for clear unit for the value, however the average speed is 250 meter/mins, from observation.
If John mows 11.5 meters of lawn from east
to west in 7.1 seconds, what is the velocity
of the lawnmower?
A. 0.6 m/s East
B. 0.6 m/s West
C. 1.6 m/s East
D. 1.6 m/s West
Which chemical bond has a low melting point? Why does this bond have low melting points? A common compound that this bond produces is used in our everyday life. SUGAR!
Answer:
1,2: When simple molecular substances melt or boil, it is these weak intermolecular forces that are overcome. The covalent bonds are not broken. Relative little energy is needed to overcome the intermolecular forces, so simple molecular substances have a low melting and boiling points.
3: Water, Almost no living thing can survive without water. Water is everywhere on our planet. It is the reason we have an organic life on earth. A water molecule consists of one oxygen atom combined with two hydrogen atoms. We use water throughout day and night; in drinking, cooking, household needs, industries, and agriculture. Apart from these general uses of water, you might be amazed to know that water plays a major role in volcanic eruptions.
PLZ HELP SOMEONE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! what is badminton drops??????????????????????????????????????
Answer:
A drop shot is the badminton shot that you perform when you are in the back of your court and you hit the birdie so it lands in the front part of your opponent's side
Explanation:
I need help lease. I will mark you brainliest
Answer: 43.5
and now I'm typing cause it said the answer had to be at least 20 characters
The minimum resultant of two forces of 20N and 5N is:
a) 10N
b) 5N
c) 20N
d) 25N
Answer:
if it's combined forces then it would be 25N if it was an unbalanced force then it would be 15N
The store where you work receives a shipment of stuffed animals. One box contains 48 teddy bears, and the other box has 32 stuffed dogs. Your job is to display the animals on shelves. You want to display them in rows of equal size, but you don't want to mix the teddy bears and the dogs. Use the drop-down menu to complete the statement. The greatest number of stuffed animals you can have in a row is
Answer:
16
Explanation:
The store where you work receives a shipment of stuffed animals. One box contains 48 teddy bears, and the other box has 32 stuffed dogs.
We find the factors of 32 and 48
The factors of 32 are: 1, 2, 4, 8, 16, 32
The factors of 48 are: 1, 2, 3, 4, 6, 8, 12, 16, 24, 48
The greatest common factor is 16.
Hence,
The greatest number of stuffed animals you can have in a row is 16
How are gravity and air resistance alike? How are they different?
Answer:
kid
Explanation:
Erica tells Michael she is 160 centimeters tall, while Michael says he is 70 inches tall. If there are 2.54 centimeters in an inch, whos taller?
Answer:
Michael
Explanation:
160cm = 62.9921 inches
70in > 63in
A place with a tropical climate would most likely be located (1 point)
a. near the equator
b. at high altitudes
c. near the poles
d. in the middle of a continent
Answer:
near the equator
Explanation:
the equator is at the center of both hemispheres, and gets the most direct sunlight year round. Therefore, it would be the most tropical.
least massive metalloid of period 4
Answer:
It is Germanium(Ge)
Explanation: