How many mL of 0.150 M HF solution are required to produce 0.0370 moles of HF

Answer:

In nature there are many different minerals we call "Salts". If you look very closely at the particles of table salt, you will find little cubic crystals. These salt crystals are made of sodium chloride (NaCl), and their cubic shape is due to a very specific arrangement of the atoms. As discussed earlier, all of the minerals classified as salts are held together through ionic bonds. The arrangement of atoms, the shapes of the crystals they form, and their mechanical, thermal, and electrical properties are all due to this special type of bonding

The two reasons why the model shows sodium chloride is that:

The other is that:

Note that a lot of Formula unit cannot exist as a single entity. Because of this, compound such as NaCl exist only as an aggregates of a more bigger number of ions that are oppositely charged .

Learn more about Sodium chloride from

https://brainly.com/question/24490939

#SPJ2

Answer: International Union of Pure and Applied Chemistry

The International Union of Pure and Applied Chemistry (IUPAC), established in 1919, is the international body that represents chemistry and related sciences and technologies.

Molar mass of Argon, Ar = 39.95 g Mass of 1 atom, m = 39.95 / (6.023 * 10^23) = 6.64 * 10^(-23) g =6.64 * 10^(-26) Kg Now, Kinetic Energy, KE = (1/2) * m * v^2 where velocity,v = 650 m/s Mass of 1 atom, m = 6.64 *...

- BRAINLIEST answerer

Answer:

1.40×10-20

Explanation:

Oh calculate the mass of 1 atom of argon the molar mass of argon 39.95g that is 6.0²×10²³atoms maybe...?

Answer:

11000 g/L

Explanation:

Since density is mass divided by volume, find the volume of the metal ball by subtracting the initial volume of water in the graduated cylinder from the ending volume. In this case, the volume would be 17.90 mL - 16.05 mL =  1.85 mL = 0.00185 L. Then using the formula for density, calculate 20.350 g / 0.00185 L = 11000 g/L.

Density is an intensive property as it does not depend on the quantity of the substances Whereas mass and volume are extensive property. Therefore, the density of the metal ball is 11000 g/L.

Density tells about the compactness of the substances, how much dense is the substances in other words. Object that is more denser than water they just sink in the water.

Mathematically,

Density = Mass of the metal ball ÷volume marked on the graduated cylinder

volume=ending volume- initial volume of water in the graduated cylinder            

            =17.90 mL - 16.05 mL

            =  1.85 mL

            = 0.00185 L.

substituting all the given values in the above equation, we get

density=  20.350 g / 0.00185 L

            = 11000 g/L.

Therefore, the density of the metal ball is 11000 g/L.

To know more about density, here:

https://brainly.com/question/16894337

#SPJ2

Answer:

D

Explanation:

D Is The Answer Fella, My Head Hurt Really Bad

Answer:

Explanation:

I hope this helps

The rate of a chymotrypsin-catalyzed reaction will increase by using more

enzyme in the reaction mixture.

The rate of a chemical reaction and the enzyme concentration have a direct

relationship. As concentration increases, the rate of a chemical reaction  

also increases and vice versa.

In this scenario, we were told more enzyme was used in the reaction mixture

which signifies an increase in the concentration and a corresponding

increase in the rate of reaction.

Read more on https://brainly.com/question/12330608

Answer:

Explanation:

The required volume can be found by using the formula for Boyle's law

[tex]V_2 = \frac{P_1V_1}{P_2} \\[/tex]

where

P1 is the initial pressure

P2 is the final pressure

V1 is the initial volume

V2 is the final volume

From the question we have

[tex]V_2 = \frac{6.5 \times 1.25}{1} = 6.5 \times 1.25 \\ = 8.125[/tex]

We have the final answer as

Hope this helps you

Answer:

see the above attachment.

Explanation:

hope this helps you.

Answer:

10

Explanation:

Equation: d = m/v

100/10 = 10

Answer:

1. An independent variable is manipulated, or changed. The dependent, or responding variable, changes based on the independent variable. The dependent variable is examined.

2. It is a controlled experiment.

Explanation:

In a controlled experiment all variables are kept the same, except for the one being tested, which is called the experimental variable , or independent variable . This group is the experimental group . The group that is not affected by the experimental variable is the control group .

Very often a graph will be used to analyze the results of the experiment. The independent/experimental variable is placed on the x-axis and the dependent variable is placed on the y-axis. The dependent variable is what is measured as a result of the application of the experimental variable.

A variable that is independent is altered. Based on the independent variable, the responding variable, or dependent variable, alters. Examining the dependent variable. The experiment is carefully controlled.

In mathematical modeling, statistical modeling, and experimental sciences, there are dependent and independent variables. Dependent variables get their name because, during an experiment, their values are investigated under the presumption or requirement that they are dependent on the values of other variables due to some law or rule.

A variable that is independent is precisely what it sounds like. It is a stand-alone variable that is unaffected by the other variables you are attempting to assess. Age, for instance, could be an independent variable.

When doing an experiment, the independent variable is what you alter, and the dependent variable is what changes as a result of that change. This is an easy way to conceive of independent and dependent variables.

Thus, based on the independent variable, the responding variable, or dependent variable, alters.

To learn more about independent variable, follow the link;

https://brainly.com/question/967776

#SPJ2

Answer:

42.0g/mol

Explanation:

The steps for this question is to use the ideal gas law, and then use n=m/M to find molar mass.

PV = nRT

n= PV/RT

Change 23 degrees to 296.15 K and 684mmHg to kpa

n = (91.1925kpa)(2.00L)/(8.314Lkpa/mol K)(296.15K)

n= 0.074mol

n = m/M

M = m/n

M = 41.98489g/mol

The volume (in liters) that the gas will occupy if the pressure is increased to 13.5 atm and the temperature is decreased to 15 °C is 15 L

From the question given above, the following data were obtained:

Initial pressure (P₁) = 8.5 atm

Initial volume (V₁) = 24 L

Initial temperature (T₁) = 25 °C = 25 + 273 = 298 K

Final pressure (P₂) = 13.5 atm

Final temperature (T₂) = 15 °C = 15 + 273 = 288 K

[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}\\\\\frac{8.5 * 24}{298} = \frac{13.5 * V_{2}}{288}\\\\ \frac{204}{298} = \frac{13.5 * V_{2}}{288}\\\\[/tex]

Cross multiply

298 × 13.5 × V₂ = 204 × 288

4023 × V₂ = 58752

Divide both side by 4023

[tex]V_{2} = \frac{58752}{4023}\\\\[/tex]

Therefore, the final volume of the gas is 15 L

Learn more: https://brainly.com/question/25547148

oh so sad for ur msg

if i were science student then absolutely i will help

but i am। computer science student in management faculty so so sry

Explanation:

your answer to the chemistry question is given !

hope that helps you.

Answer:

Convection Currents

Explanation:

This graph shows a straight line.

Answer:

The graph is a straight line that angles upward.

Answer:

Kelvin = Celsius + 273.15

Explanation:

Instead of 273.15 you can use just 273 as well

Considering the definition of Kc, the equilibrium molar concentration of HCl at 500 K is 0.0894 [tex]\frac{mol}{L}[/tex].

The balanced reaction is:

H₂(g) +Cl₂(g) ⇆ 2 HCl(g)

Equilibrium is a state of a reactant system in which no changes are observed as time passes, despite the fact that the substances present continue to react with each other. In other words, reactants become products and products become reactants and they do so at the same rate.

In other words, chemical equilibrium is established when there are two opposite reactions that take place simultaneously at the same speed.

The concentration of reactants and products at equilibrium is related by the equilibrium constant Kc. Its value in a chemical reaction depends on the temperature and the expression of a generic reaction aA + bB ⇄ cC is

[tex]K_{c} =\frac{[C]^{c} x[D]^{d} }{[A]^{a} x[B]^{b} }[/tex]

That is, the constant Kc is equal to the multiplication of the concentrations of the products raised to their stoichiometric coefficients by the multiplication of the concentrations of the reactants also raised to their stoichiometric coefficients.

In this case, the constant Kc can be expressed as:

[tex]K_{c} =\frac{[HCl]^{2} }{[H_{2} ]x[Cl_{2} ] }[/tex]

You know that in an equilibrium mixture of HCl, Cl₂, and H₂:

Replacing in the expression for Kc:

[tex]4x10^{18} =\frac{[HCl]^{2} }{[1x10^{-11} ]x[2x10^{-10} ] }[/tex]

Solving:

[tex]4x10^{18} =\frac{[HCl]^{2} }{2x10^{-21} }[/tex]

[tex]4x10^{18} x 2x10^{-21}=[HCl]^{2}[/tex]

[tex]8x10^{-3} =[HCl]^{2}[/tex]

[tex]\sqrt[2]{8x10^{-3}} =[HCl][/tex]

0.0894 [tex]\frac{mol}{L}[/tex]= [HCl]

Finally, the equilibrium molar concentration of HCl at 500 K is 0.0894 [tex]\frac{mol}{L}[/tex].

Learn more:

The claim that the strongest intermolecular interactions between propanol molecules arises from hydrogen bonding is True.

Intermolecular forces are weaker attraction forces that are utilized to define physical characteristics of molecules such as:

Hydrogen bonding is an type of intermolecular forces.

It is a type of dipole-dipole interaction that only happens when a hydrogen atom is connected to the atomic element of oxygen, nitrogen, or fluorine.

From the question given, in the propanol (CH3CH2CH2OH) molecule, the hydrogen usually has a partially positive charge which attracts the partially negative charge of the oxygen.

Therefore, we can conclude that the claim is True.

Learn more about Hydrogen Bonding here:

https://brainly.com/question/10904296?referrer=searchResults

Answer: Hi! The partial pressure of CH4 is

=1 atm

Explanation:

The partial pressure of methane in the mixture of methane and ethane has been 1 atm.

Partial pressure has been the pressure exerted by a gas in the solution or mixture. The partial pressure of each gas has been the total pressure of the gaseous mixture.

The partial pressure of the gas has been dependent on the volume, temperature, and concentration of the gas.

The given methane has a partial pressure of 1 atm in the 15 L vessel. The addition of ethane results in the change in the total pressure of the mixture, as there have been additional moles of solute that contributes to the solution pressure.

However, since there has been no change in the concentration and volume of methane, the pressure exerted by methane has been the same. Thus, the partial pressure of methane has been 1 atm.

For more information about the partial pressure, refer to the link:

https://brainly.com/question/14623719

Yes according to reliable sources.

Answer:

1.345.0

Explanation:

Hope this helpssss

Some benefits of genetic engineering in agriculture are increased crop yields, reduced costs for food or drug production, reduced need for pesticides, enhanced nutrient composition and food quality, resistance to pests and disease, greater food security, and medical benefits to the world's growing population.

Insect resistance: Corn

Herbicide tolerance: Soybean

Answer:

sound is given off

Explanation:

due to a number of scientific research sound that is given off of an object is not due to a chemical reaction.

If the absorbance of a solution of curcumin which is too concentrated is measured, the absorbance will be unusually high.

Spectrometry measures the interaction of light with molecules. The absorbance refers to how much light that interacts with molecules of the substance. The more the concentration of the substance the higher the absorbance of the solution.

Hence, if  the absorbance of a solution of curcumin which is too concentrated is measured, the absorbance will be unusually high. An unusually high absorbance tells us that the solution is too concentrated.

Learn more: https://brainly.com/question/13440572

Answer:

D. works with bones to help you move

Explanation:

Your muscles and tendons are what help bones move.

This problem is describe the mole-ratio composition of an allow composed by tin, lead and cadmium. Ratios are given as Sn:Pb 2.73:1.00 and Pb:Cd is 1.78:1.00, and we are asked to calculate the mass percent compositon of Pb in the allow.

In this case, according to the given information, it turns out possible realize that the following number of moles are present in the alloy, according to the aforementioned ratios:

[tex]2.73mol Sn\\\\1.00molPb\\\\\frac{1.00molPb*1.00molCd}{1.78molPb}= 0.562molCd[/tex]

Next, we calculate the masses by using each metal's atomic mass:

[tex]m_{Sn}=2.73mol*\frac{118.7g}{1mol}=324.05g\\\\ m_{Pb}=1.00mol*\frac{207.2g}{1mol}=207.2g\\\\m_{Cd}=0.562mol*\frac{112.4g}{1mol}=63.2g[/tex]

Thus, the mass percent composition of each metal is shown below:

[tex]\%Sn=\frac{324.05g}{324.05g+207.2g+63.2g} *100\%=54.5\%\\\\\%Pb=\frac{207.2g}{324.05g+207.2g+63.2g} *100\%=34.9\%\\\\\%Cd=\frac{63.2}{324.05g+207.2g+63.2g} *100\%=10.6\%[/tex]

So that of lead is 34.9 %.

Learn more:

THE ADVANTAGE OF IODIN

THE DISADVANTAGE OF IODIN