How to use Goal Seek to calculate the changing value in a cell?

Using the frequency of the radio signal given, the length of the half-wave dipole antenna is 30m

The formula to calculate the length of a half-wave dipole antenna is:

Length (L) = (c / f) / 2

where:

We are given that the frequency of the radio signal is 10 MHz (10,000,000 Hz). Substituting these values into the formula, we get:

L = 3 * 10⁸ / 10 * 10 * 10⁶

L = 30m

Therefore, the length of a half-wave dipole antenna to be used to receive a 10 MHz radio signal is 30 meters.

Learn more on frequency here;

https://brainly.com/question/19249186

#SPJ1

Answer:

Explanation:

enabled

Two types of respirators commonly used in heavy-duty repair and diesel technology are:

N95 Respirators

N95 RespiratorsPowered Air-Purifying Respirators (PAPRs)

N95 respirators are a form of particulate filtering facepiece respirator that offers a high level of protection against airborne particles. They are made to filter out at least 95% of airborne particles, including those produced by diesel engines, such as exhaust fumes and particulate matter. In workplaces where workers are exposed to dangerous airborne toxins, N95 respirators are frequently utilized and are disposable.

Another form of respirator used in diesel technology and heavy-duty repair is the PAPR. PAPRs, in contrast to N95 respirators, draw air through filters before delivering it to the wearer's breathing zone. This positive pressure system offers a better level of pollutant protection by continuously supplying filtered air. However, they are frequently favored in high-risk situations with significant exposure to diesel exhaust and other dangerous particles because PAPRs are typically more expensive and require routine maintenance.

Both N95 respirators and PAPRs play crucial roles in protecting workers from respiratory hazards in heavy-duty repair and diesel technology settings. The choice of respirator depends on the specific work environment, level of exposure, and regulatory requirements

Learn more about particulate respirator here

https://brainly.com/question/31640563

#SPJ2

To define and instantiate an object named calc of type Calcululator is: Calculator calc = new Calculator();

This calls the default constructor (ctor) of the Calculator class to initialize the calc object. A new object named calc is created, and it is of the type Calculator. It is then initialized by calling the constructor, which outputs the message "Calculator created" to the console. The Constructor script tag is used to encapsulate the code, and the type attribute is set to  text/javascript to indicate that the code within the tag is JavaScript code.

Learn more about constructor: https://brainly.com/question/13267121

#SPJ11

Routing loops are often referred to as count-to-infinity problems because loops, without preventive measures, will cause packets to bounce around the internetwork infinitely.

In computer networks, routing loops occur when packets continue to be routed in a loop indefinitely by the network routers. A routing loop is a situation in which a packet is routed continuously around a network of routers rather than being delivered to its intended destination. When a router receives a packet, it searches its routing table for the best path to the destination.

When the packet is passed from router to router, a problem may occur if one of the routers' routing tables contains an incorrect path or if the routing updates are not consistent across the network. Routing loops can be prevented by using techniques such as split horizon, route poisoning, hold-down timers, and triggered updates.

Split horizon is a technique in which a router will not send a packet back in the direction from which it was received. Route poisoning is a technique in which a router informs its neighboring routers that a particular route is no longer available by sending an update with an infinite metric value.

Hold-down timers prevent a router from accepting any routing update information for a specified period of time, and triggered updates are used to update the routing tables of neighboring routers immediately.

You can learn more about routing loops at: brainly.com/question/29733582

#SPJ11

The program's primary section encourages the user to utilise the input feature to enter the monthly expenditures for each expense. The showExpenses function is then used to calculate and display the total expenses using the values the user entered as inputs.

Here is a Python application that requests the user to enter the monthly costs associated with driving a car and computes the sum of those monthly and yearly prices:

loan, insurance, petrol, oil, tyres, and maintenance expenses:

loan + insurance + petrol + oil + tyres + maintenance = total monthly cost

print("Total monthly cost: $", total monthly cost); total annual cost = total monthly cost * 12

"Total annual cost: $" printed after total annual cost

# Get user input

loan = float("Enter your monthly loan payment here: ");

Insurance is equal to float(input("Enter monthly insurance cost: "))

Oil equals float(input("Enter monthly oil cost: ")) and gas equals float(input("Enter monthly gas cost: "))

Maintenance is equal to float(input("Enter monthly maintenance cost: ")) + float(input("Enter monthly tyre cost: "))

# Call the function showExpenses

The showExpenses function in this programme takes six arguments to represent the monthly costs of loan payments, insurance, gas, oil, tyres, and maintenance. The arguments are loan, insurance, gas, oil, tyres, and maintenance. The program's primary section encourages the user to utilise the input feature to enter the monthly expenditures for each expense. The showExpenses function is then used to calculate and display the total expenses using the values the user entered as inputs.

Learn more about The program's here:

https://brainly.com/question/29998836

#SPJ4

The given statement "under non-discretionary access control, a third-party security administrator determines what users have access to certain network and system resources." is false because it incorrectly defined the concept of non-discretionary access control.

Under non-discretionary access control, access is determined by system administrators based on predefined rules and policies, rather than a third-party security administrator. In this type of access control, access decisions are typically made based on factors such as job title, clearance level, and other predetermined criteria.

You can learn more about access control at

https://brainly.com/question/29024108

#SPJ11

On the Mohs Hardness Scale, a mineral that scratches glass is rated at a hardness of 5.5. This is just above the hardness of a steel file, which has a hardness of 5.

The Mohs Hardness Scale is used to measure the relative hardness of minerals. It ranks minerals from softest to hardest based on their scratch resistance. The scale starts with talc at 1 and ends with a diamond at 10. A mineral that scratches glass is a hardness of 5.5 on the scale, which is just above a steel file (hardness of 5).

When using the Mohs Hardness Scale, it's important to remember that hardness is not the same as strength. A mineral may have a low hardness rating but still, have high strength. For example, talc (hardness 1) is a very weak mineral, but diamond (hardness 10) is incredibly strong.

It's also important to note that the scale is relative. Hardness is measured by testing how one mineral will scratch another. Therefore, the same mineral may have different ratings based on what it's being compared to.

In conclusion, a mineral that scratches glass is rated at a hardness of 5.5 on the Mohs Hardness Scale. Hardness is not the same as strength, and it's important to note that hardness is relative and can vary depending on what it's being compared to.

Know more about Minerals here :

https://brainly.com/question/15844293

#SPJ11

The potential energy at point A is equal to the kinetic energy at point B.i.e., 1/2 mu^2 = mgh + T (Lθ)At point A, θ = 0°At point B, θ = 400° - 0° = 400°We can neglect the mass of the cord as it is much smaller than the mass of the pendulum i.e., 1/2 × 2 × 3^2 = 2 × 9.81 × 1.2 + T × (0.8 × 400 × π/180)T = (1/0.8 × 400 × π/180) × (1/2 × 2 × 3^2 - 2 × 9.81 × 1.2)T = 102.5 NThe tension in the cord when the pendulum passes through point B is 102.5 N.

The mass of the pendulum, m = 2 kg Initial speed, u = 3 m/sThe height from which the pendulum is released, h = 1.2 mThe length of the cord, L = 0.8 m The tension in the cord when the pendulum passes through point B = ?Formula Used:The total energy of the pendulum = Kinetic Energy + Potential Energy + Work done by the tensionKinetic Energy (K.E) = 1/2 mu^2Potential Energy (P.E) = mgh Work done by the tension = T (Lθ)Where, T = Tension in the cord, L = Length of the cord, θ = angle of rotation between points A and B Explanation: When the pendulum reaches the bottom-most position, the kinetic energy of the pendulum is completely converted into potential energy.

Learn more about potential energy

brainly.com/question/24284560

#SPJ11

The statement ''The Institute of Electrical and Electronics Engineers (IEEE) is a leading standards-setting organization whose IEEE network standards are the basis for many telecommunications devices and services'' is true.

This is because the Institute of Electrical and Electronics Engineers (IEEE) is a renowned professional organization that develops and sets technical standards in various fields, including telecommunications.

The IEEE's network standards, such as the Ethernet standard, have been fundamental to the development of modern telecommunications devices and services.

For example, Ethernet is widely used in local area networks (LANs), while Wi-Fi, another IEEE standard, is used for wireless networking. IEEE's standards ensure that devices from different manufacturers can communicate with each other, creating a more interconnected and interoperable world.

The organization has a long-standing history of contributing to the development and advancement of telecommunications, making it a crucial player in the industry.

For more questions like IEEE click the link below:

https://brainly.com/question/29996012

#SPJ11

To determine the slope at point A and the displacement at point C using the conjugate beam method, we must first determine the displacement of the entire beam. The equation for the displacement can be written as

 [tex]u(x) = EI\times [C1 \times sinh\frac{x}{L}]\\[/tex] + [tex]C2 \times cosh\frac{x}{L}\times[EI + WL 4][/tex],  

Where C1 and C2 are constants that are determined by boundary conditions. The boundary conditions  are

u(0) = 0 and M(L) = 0

where L is the length of the beam. By solving for C1 and C2, we can substitute them into the displacement equation to find the displacement of the entire beam.

Once the displacement equation is known, we can calculate the slope at point A and displacement at point C by taking the derivatives of the displacement equation.

The slope at point A is given by d u(x)  and the displacement at point C is given by u(C).

By using the conjugate beam method and the given boundary conditions, we can calculate the slope at point A and the displacement at point C of the beam.
Slope at A : When calculating the slope at A, it's critical to use the moment equation that relates to point A. By using the beam segment BD as the conjugate beam and applying the moment equation, we can find the slope at A.
The moment equation is M = EI(d2y x dx 2). After applying the boundary condition for moment, we can get the slope at point A.
Displacement at C: The displacement of a beam at a specific point can be determined using the same method.

To determine the displacement at point C, we must first determine the conjugate beam segment and then apply the moment equation that relates to point C.

The displacement equation is w(x) = EI(dy x dx)    

The integral of this equation should be used to determine the displacement at point C.

For more such questions on displacement

https://brainly.com/question/28041351

#SPJ11

Note- The correct question would be

Use the conjugate beam method and determine the slope at B and the displacement at C of the beam. "El" is constant.

Mechanical energy refers to the energy that a system possesses due to its motion or position. The mechanical energy of a system includes both potential energy and kinetic energy.

Potential energy is the energy that a system possesses due to its position, while kinetic energy is the energy that a system possesses due to its motion. The mechanical energy of a system can be calculated using the equation

E = K + P,

where E is the total mechanical energy, K is the kinetic energy, and P is the potential energy.

The mechanical energy of a system is conserved, which means that it cannot be created or destroyed but can only be transferred from one form to another. For example, when a ball is thrown into the air, it has both potential and kinetic energy. As it rises, its potential energy increases while its kinetic energy decreases. At the top of its trajectory, the ball has zero kinetic energy and maximum potential energy. As the ball falls back to the ground, its potential energy decreases while it's kinetic energy increases until it hits the ground, and all its mechanical energy is converted into heat and sound energy.

To learn more about Potential energy :

https://brainly.com/question/15522027

#SPJ11

When adding an item to an array-based list with an allocation size equal to the list length, a new array is generally allocated with one more than the current length.

What is an array-based list?

Array-based list is a linear data structure that is used to store and access data in contiguous memory locations. It stores data elements that are of the same type, and the memory allocated is static. Therefore, when you add an element to an array, it is necessary to allocate a new memory space to hold the new value added to the existing array.

The size of the array is crucial when appending an item in the array-based list. When the array-based list allocation size is equal to the list length, a new array is generally allocated with one more than the current length. This is to ensure that there is space for the new item to be added without experiencing a memory overflow.

The correct answer is option C, one more than the current length. This is to ensure that the array is large enough to hold the new item, while not wasting too much space in the allocated memory.

Learn more about Array-based list here:

https://brainly.com/question/13094864

#SPJ11

True. Constructionist theories of deviance emphasize the role of social norms and power dynamics in defining what is considered deviant behavior.

True. Constructionist theories of deviance emphasize that what is considered deviant behavior is not inherent in the behavior itself, but is instead socially constructed through the interactions and perceptions of individuals and groups within society. In other words, deviance is not a fixed concept, but is rather a product of social norms and expectations that are created, reinforced, and sometimes contested by those with the power to define them. Thus, constructionist theories focus on the social processes by which certain behaviors or individuals are labeled as deviant and how these labels are used to reinforce or challenge existing power dynamics and social hierarchies.

Learn more about Constructionist theories here:

brainly.com/question/29659232

#SPJ1

1) The values of zero location in the order of the greatest to the least effect upon the pure second-order transient response is Location -50, Location -20, Location -10, Location -5, Location -2.

2) The values of b must be very close to 3.0, 3.01, 3.1, and 3.3 are the values of b that will have minimal effect on the pure second-order transient response.

3) For minimal impact on the transient response, the values of b must be very close to 30, 30.01 and 30.1 are the values of b that will have minimal effect on the pure second-order transient response.

1) When a zero is added to the system of Prelab la at -250 and then moved to -50, -20, -10,-5, and - 2, the values of zero location in the order of the greatest to the least effect upon the pure second-order transient response are Location -50, Location -20, Location -10, Location -5, Location -2. The location of zero determines the rate at which the poles would approach their respective steady-state value. A smaller pole would result in the fastest approach, while a larger pole would result in a slower approach. So, for pure second-order systems, the location of zero determines the effect on the transient response.

2) The transfer function is

G(s) = (25b/a)(s + a)/((s + b)(s² + 4s + 25)),

where a = 3 and b = 3.01, 3.1, 3.3, 3.5, and 4.0, the values of b that will have minimal effect upon the pure second-order transient response For a transfer function with two distinct poles, the transient response will only be underdamped if both poles are complex conjugates. As a result, for a second-order system to have a pure second-order transient response, the poles must be complex conjugates. As a result, for minimal impact on the transient response, the values of b must be very close to 3.0 (in the case of the pole pair at -2.5 ± 4.330j) 3.01, 3.1, and 3.3 are the values of b that will have minimal effect on the pure second-order transient response.

3) The transfer function is

G() = (2500b/a)(s + a)/((s + b)(s² + 40s +2500)),

where a = 30 and b = 30.01, 30.1, 31, 35, and 40, the values of b that will have minimal effect upon the pure second-order transient response on the transient response. The transient response will only be underdamped if both poles are complex conjugates for a transfer function with two distinct poles. As a result, for minimal impact on the transient response, the values of b must be very close to 30 (in the case of the pole pair at -20 ± 30j) 30.01 and 30.1 are the values of b that will have minimal effect on the pure second-order transient response.

Learn more about  "transient response" at : https://brainly.com/question/10980509

#SPJ11

Answer:

?????????????????????????

You can access the constant pi as defined in the math module by using the statement math.pi.

This is because the line from math import pi in the foo.py file imports the constant pi from the math module, and when you import the foo module in your program using import foo, you can access the pi constant through the math module using math.pi.

Therefore, the correct statement is math.pi. The other statements, foo.math.pi, foo.pi, and O pi, are not correct ways to access the constant pi.

When you use the statement from math import pi in a Python module (in this case, the foo.py module), you are importing the constant pi from the math module directly into that module's namespace. This means that the pi constant can be used directly in that module, without needing to prefix it with the math module name.

Read more about math modules here:

https://brainly.com/question/30487382

#SPJ1

Vertical ventilation, or the use of ladders to access a roof or a parapet wall, is an important element of firefighting operations. To ensure safety, ground ladders should be extended at least three rungs above the edge of the roof or top of the parapet wall.


When using ground ladders for vertical ventilation, the firefighter should always check for the integrity of the ladder. This includes ensuring the ladder has the appropriate number of rungs and that each rung is in good condition and secure. Additionally, the ladder should be extended to at least three rungs above the roof or parapet wall to avoid any potential hazards from collapsing or slipping. When extending the ground ladder, ensure it is placed securely and stably on the ground and is not in danger of collapsing. If necessary, secure the ladder with rope, which should be at least four rungs above the roof or parapet wall.

Finally, the firefighter should be aware of the environment when extending the ladder and make sure that it is stable and can reach the appropriate height. In conclusion, when performing vertical ventilation, it is important to extend ground ladders at least three rungs above the edge of the roof or top of the parapet wall. Additionally, take the appropriate safety measures and check the ladder’s integrity, secure it with rope, and be aware of the environment.

To learn more about Vertical ventilation :

https://brainly.com/question/30102109

#SPJ11

The first step in the digital signature process where Mike sends a message to Sophie is to create a hash of the message using a secure algorithm.

A digital signature is a method of verifying the authenticity and integrity of digital data or documents. Digital signatures are used to guarantee that the data hasn't been tampered with and to prove who generated it. The digital signature process follows these steps:

The sender hashes the message using a secure algorithm. The sender encrypts the hash using his or her own private key to generate the digital signature. The message and the digital signature are sent to the receiver. The receiver decrypts the digital signature using the sender's public key.

The receiver hashes the received message using the same hash function used by the sender. The receiver compares the two hashes to verify that they are the same. If the hashes match, it confirms that the message has not been tampered with and that the sender is legitimate.

For more such questions on digital signature

https://brainly.com/question/29809712

#SPJ11

The resources should have more capacity at the beginning.

Resources are the things that are available to help us to complete a task. In the context of project management, resources may include people, equipment, materials, money, and time. It is important to manage these resources effectively to ensure that the project is completed on time and within budget.

Capacity refers to the amount of work that a resource is capable of doing. For example, the capacity of a worker might be determined by the number of hours that they can work per day or the amount of work that they can complete within a given period of time. It is important to consider the capacity of resources when planning a project so that you can allocate them effectively.

The resources should have more capacity at the beginning. This is because, at the beginning of a project, there is a lot of work to be done and many resources are needed. As the project progresses, the amount of work decreases, so fewer resources are needed. Therefore, having more capacity at the beginning ensures that there are enough resources to complete the work efficiently and on time.

To learn more about "resource capacity": brainly.com/question/29313227

#SPJ11

The line that would not compile if both Person and Directory implement the Printable interface is: `Person p = new Directory()`. The correct answer is B.

An interface in Java is a reference type that is similar to the class but can contain only constants, methods, default methods, static methods, and nested types, whereas a class can contain methods, variables, and nested classes or interfaces. The interface is used to define a contract in which an implementing class is required to follow all the methods or behaviours that are declared by the interface, which allows multiple implementations to share a single method signature.

We use the interface keyword to create an interface in Java. A method declaration appears in the interface declaration with no implementation, and the implementation is provided by the implementing class. For example, the following is the syntax for creating an interface in Java.

interface interface_name { return_type method_name1(parameter_list); return_type method_name2(parameter_list); ... return_type method_namen(parameter_list);}

In the given question, both Person and Directory implement the Printable interface, which means they have implemented all the methods of the Printable interface.  Thus, the first and third lines would compile, and the fifth line is also valid. However, `Person p = new Directory()` is not valid because we cannot assign an object of the Directory class to a reference variable of the Person class. So, the answer to the question is that the line that would not compile is `Person p = new Directory()`.

You can learn more about interface in Java at

https://brainly.com/question/12948162

#SPJ11

When we calculate the earnings per share, we measure the portion of a company's profit that is distributed to each outstanding share of common stock.  

Option (C) is the correct answer

for more such question on potential

https://brainly.com/question/26978411

#SPJ11

After the following statement executes, the value that the MAPLE enumerator will be stored as in memory is c. 'M'.

An Enumerator is a kind of C++ data structure that stores a set of numerical identifiers that can be used to represent the contents of an array, list, or other data structure. They are often utilized in C++ programs to represent items in an array or list since it makes it simple to iterate through the array or list without having to do pointer arithmetic.As the enumeration of the Tree isOAK, MAPLE, PINETherefore, enum MAPLE will be stored as 'M'. Hence, option C is the correct answer.

Learn more about data structure: https://brainly.com/question/13147796

#SPJ11

The average power consumed by the resistor is 0.115 mW.

PWM RMS voltage and power An ideal function generator generates an open-circuit PWM waveform with voltages 0 V and 8 V with a 70% duty cycle.

The question asks for the RMS voltage. Vrms=  Vpeak*sqrt(D)where, Vpeak = 8 V and D = 70% = 0.7Therefore,Vrms= 8*sqrt(0.7) ≈ 6.787 V The next part of the question is about finding the average power consumed by a 400 Ω resistor when connected to the function generator producing the same signal. The formula for average power is: P = Vrms^2/RL where, Vrms = 6.787 V and RL = 400 ΩTherefore, P = 6.787^2/400 ≈ 0.115 mW

Learn more about generator

brainly.com/question/10736907

#SPJ11

Answer:

D

Explanation:

it is for beneficial to use as it is but based on the conditions it is better to scale down

The given statement "Besides information on chemical concentration and water temperature, the other machine setting information that should be posted on dishwashing machines include machine cycle length and detergent brand" is true because besides information on chemical concentration and water temperature,

The other machine setting information that should be posted on dishwashing machines include machine cycle length and detergent brand.

Posting information on dishwashing machines helps in ensuring that dishes are washed effectively and hygienically, and it also helps in preventing damage to the machine. Additionally, employees who operate the machine can refer to the posted information to ensure that the machine is operating correctly.

The advantages of having a dishwashing machine include: It saves time and increases efficiency It allows for a larger volume of dishes to be washed at once It provides consistent results and eliminates the risk of human error It saves water and reduces the amount of chemicals used.

For such more question on chemical:

https://brainly.com/question/30134631

#SPJ11

With a daily water consumption rate of 250 litres per person and a wastewater ratio of 0.75, the dry water discharge for a population of 45,000 people is therefore 2,812,500 litres per day.

We must first know the entire daily water consumption for a population of 45,000 before we can compute the dry water discharge:

Population times Water Consumption Rate equals Total Water Consumption.

Water Usage as a Whole = 45,000 x 250

11,250,000 litres of water are consumed worldwide each day.

The wastewater discharge must then be determined, and it is provided by:

Discharge of Wastewater = 8,437,500 litres per day

The difference between the total water consumption and the wastewater discharge can then be used to determine the dry water discharge:

2,812,500 litres of dry water discharge per day

With a daily water consumption rate of 250 litres per person and a wastewater ratio of 0.75, the dry water discharge for a population of 45,000 people is therefore 2,812,500 litres per day.

Learn more about  dry water discharge here:

https://brainly.com/question/8633534

#SPJ4

The statement "you can declare as many variables in a statement as you want, as long as the variables are different data types" is false.

In Java, each variable must be declared with a separate statement, and the same data type must be used for all variables declared in the same statement. Java has strict rules for declaring variables, including data types, scope, and visibility. The following are some important things to keep in mind when declaring variables in Java: Each variable must be declared with a separate statement. A semicolon is used to indicate the end of each statement. Only one data type can be used in a declaration statement. All variable names must be unique within the scope they are declared in. There are several data types to choose from when declaring a variable in Java. Some of the most common data types are int, double, float, boolean, and char. It is important to choose the appropriate data type for each variable based on its intended use in the program. For example, an int variable is used for whole numbers, while a double variable is used for numbers with decimals. The statement "you can declare as many variables in a statement as you want, as long as the variables are different data types" is a false statement. In Java, each variable must be declared with a separate statement, and the same data type must be used for all variables declared in the same statement.

To learn more about Variables :

https://brainly.com/question/29890628

#SPJ11

The answer of the given question based on the finding which statement is true about the dual table the answer is given below with explanation.

In computing, a database is organized collection of data that are stored and accessed in electronically. Databases are used to store and manage large amounts of structured and unstructured data, which can be accessed, queried, and manipulated by software applications.

Databases consist of one or more tables that contain data organized into rows and columns. Each table represents a different entity or concept, and each row represents a specific instance or record of that entity, while each column represents a specific attribute or field of that entity. The data in a database is structured in a way that allows it to be easily searched, filtered, and analyzed using software tools and programming languages.

The following two statements are true about the dual table:

The other statements are false:

To know more about SQL visit:

https://brainly.com/question/30065294

#SPJ1

The rate of heat transfer by convection is approximately 2.01 kW.

The rate of heat transfer by convection (kW) when the convective heat transfer coefficient is 7.2 W/Km²,

the surface area is 16 m²,

the surface temperature is 317 K, and

the surrounding temperature is 429 K is approximately 2.01 kW.

Let's see how to obtain this result. Basically, we have to find the rate of heat transfer by convection, which is given by this equation:

[tex]q = hA(Ts − T∞)[/tex]

where q is the rate of heat transfer by convection,

h is the convective heat transfer coefficient,

A is the surface area,

Ts is the surface temperature, and

T∞ is the surrounding temperature.

Now, substitute the given values and compute the result:

[tex]q = (7.2 W/Km^2) × (16 m^2) × (317 K − 429 K)q ≈ - 2.01 kW[/tex]

Therefore, the rate of heat transfer by convection is approximately 2.01 kW.

To know more about convection:https://brainly.com/question/9382711

#SPJ11

Critical-thinking abilities link and arrange concepts. They are classified into three types: analysis, inference, and assessment. or count 0 to SIZE - 1 step 1

What is a case based approach?

Students are engaged in discussion of particular scenarios that approximate or are generally real-world examples while using a case-based method. This technique is learner-centered, with participants interacting intensely as they gain their knowledge and work as a group to investigate the case.

A crucial instance case focuses on a one-of-a-kind scenario with no specified aim. For example, a veteran suffering from severe PTSD may be examined in order to uncover strategies to alleviate his condition. Ethics play an important role in the case study process, and the majority of case studies require ethical approval.

Learn more about Critical-thinking

https://brainly.com/question/12980631

#SPJ1