Answer:
B (exponential growth )
Explanation: wish u the best bby <33
1. What are hand tools ? *
1 point
2. Give one example and one use of the following handtools I. Measuring tool II. Cutting Tool III. Striking tool *
6 points
3. Name the hand tool used to drive nails *
1 point
4. Name the hand tool used to cut plastic and metal pipes *
1 point
5. Which hand tool is used to clamp your work piece to the work table ? *
1 point
6. What are portable power tools? *
1 point
7. Name the power tools used to carryout the following operations I. Boring holes II. Cutting curves III. Sanding *
3 points
8. List three examples of stationary machines *
3 points
Answer:
Microsoft Word - Hand tools SON
A technician notes that an operating air-conditioning system has ice formed on the suction line at the condensing unit. The technician can reasonably assume that:
The technician can reasonably assume that evaporator coil is frozen over.
An air-conditioning system makes a place cooler by absorbing heat from the
surrounding. This is usually done with the aid of the evaporator coil.
In situations whereby there are ice particles formed on the suction line at the
condensing unit then it means the air conditioning system is faulty and must
be turned off to prevent damage to other parts.
Read more about Air conditioning system here https://brainly.com/question/24920322
All of the following are examples of capital intensive industries EXCEPT: *
1 point
Soft drink production
oil extraction
manufacturing
hospitality
Answer:
hospital
Explanation:
Soft drink production is a capital intensive industry as it's depends upon the economy and trade.Oil extraction is a national industry and it also involves the intention of trade.Manufacturing is similar to soft drink production and has intense of trade.Hospital doesn't has the intention of trade so it's the answerhow to calculate modulus of rigidity from stress strain curve
Answer:
Explanation:
The modulus of rigidity formula is G=E/(2(1+v)), and modulus of rigidity is denoted by G, elastic modulus is denoted by E and poisson's ratio is v in the formula.
2) What kinds of food can you eat in space?
Answer:
fruits, nuts, peanut butter, chicken, beef, seafood, candy, brownies now if we talking about drinks ,coffee, tea, orange juice, fruit punches and lemonade
Explanation:somehow this all are delicious
What is the voltage across the load, RL, in
this voltage divider network?
10.25 V
4.55 V
5.71 V
11.50 V
Answer:
(c) 5.71 V
Explanation:
The circuit can be redrawn to a Thevenin equivalent that is 6V through a 5-ohm resistor into a 100-ohm load. Then the voltage at the load is ...
(6 V)(100/(100 +5) ≈ 5.71 V
Write a system of equations to describe the situation below, solve using any method, and fill in the blanks.
Nicole and Josie are both selling cookie dough for a fundraiser. Although Nicole has already sold 4 tubs, Josie hasn't sold any yet. If Nicole starts selling 5 tubs per day and Josie begins selling 6 tubs per day, they will eventually sell the same amount of cookie dough. How many tubs will each sell? How many days will that take?
Nicole and Josie will each sell
tubs of cookie dough in
days.
The number of tubs that each of them sold is; 24 tubs each
The number of days it will take for both of them to sell same amount of tubs is; 4 days
Number of cookies that Nicole had already sold = 4 tubs
Number of cookies sold by Josie before counting = 0 cookies
Nicole now sells 5 tubs per day and
Josie now sells 6 tubs per day.
Let the number of days it will take for them to have sold the same amount of cookies be d.
Thus;
5d + 4 = 6d + 0
6d - 5d = 4
d = 4 days
Thus, total number of cookies for both are;
Total for Nicole = 4 + 5(4) = 24 cookies
Total for Josie = 6(4) = 24 cookies
Read more about proportion at; https://brainly.com/question/870035
WHICH LUBRICATION SYSTEM RECEIVES OIL FROM THE OIL SUPPLY TANK, PRESSURIZES THE OIL, SENDS THE OIL THROUGH THE FILTER AND DELIVERS THE OIL TO THE BEARINGS
Answer:
The following is the answer.
Explanation:
PRESSURE SYSTEM.
Many amateur video games suffer from what kind of layout?
A. an overly neutral layout
B. an overly simplistic layout
C. an over-crowded layout
D. a boring layout
Answer:
D a boring layout I think but you welcome
Select the correct answer. which process involves creating a product by heating metals and changing their shape through the application of mechanical force?
A. finishing
B. forming
C. assembling
D. casting
would it be forming? or casting? I'm so lost
Answer:
I would say that it is forming.
Explanation:
Give brainliest if u can. :S
How much current is drawn by a flashlight that has a resistance of 10 ohms if a voltage of 3 volts is impressed across it?
Answer:
0.3 amps
Explanation:
amps can be found using the equation
current=volts/resistance
so current=3V/10Ohms=0.3 amps
Please help me do this with my exam tomorrow.
Indicate the target item of the time to use, preserve and turn it in time. In your family and locality, what methods of harvesting, management and processing do you apply? Ex example
Answer:
ddddddddddddddddddddddddddddd
Explanation:
cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
A factory hires a consultant to recommend ways to improve its productivity. The consultant notices that the production floor is strewn with tools and machines that are not continually in use. Which of the 5S philosophies should the consultant recommend to the management to establish better productivity?
A.
set in place
B.
sort
C.
standardize
D.
shine
E.
sustain
Answer:
B
Explanation:
Keep only what is used. Remove all unnecessary items. Red tag these items for review.
John has an exhaust leak in his Acura Integra GS-R, What steps would he take to fix the leak in time for his inspection?
Answer:
Explanation:
Fist you need to identify where the leak is coming from. You can do this by either listening for the leak or spraying soapy water on the exhaust to look for air bubbles coming out of the exhaust. Depending on the spot of the leak there are many ways you can fix this leak.
1. Exhaust clamp
2. Exhaust putty
3. Exhaust tape
4. New exhaust
Exhaust clamp is best used for holes on straight pipes.
Putty is best used on welds or small holes like on exhaust manifolds or welds connecting various pieces like catalytic converters, mufflers, or resonators.
Tape will work best on straight pipes with holes.
New exhaust is for when the thig is beyond repair, like rust.
Now good luck because working on exhausts is a pain.
An electric sign takes 40A from a 240V supply. What current will it take if the voltage is raised to 300V. Help PLEASE!!!
.........................
Oil refining is an example of:
Construction Production
Extractive Production
Domestic Production
Traditional Production
Extractive industry, can be defined as a processes that involve different activities that lead to the extraction of raw materials from the earth (such as oil, metals, mineral and aggregates), processing and utilization by consumers.
(b) The application of user centred design can lead to innovative products such as the umbrella shown in Figure 9.
Explain the concept of user centred design and how it may have influenced the design of the umbrella shown in Figure 9. (6 marks)
Answer:
the concept of user centred design is the idea of putting your clients best needs in mind. you need to be empathic and understanding of how to make their life easier. by doing research you can do this. for example the design in figure 9 shows an umbrella with a canopy. the canopy can deflect rain and still have the easy design of an umbrella. this makes it not only easier to use but functional.
Explanation:
i wrote this myself so copy it or just rewrite it, it doesnt matter
Connect wires to make the correct logic outputs.
Outputs needed: ~(B&C), A.
(Assignment: NAND Gates.
School Program: Acellus.
Class: Electronics & Coding.)
Answer:
Explanation:
im dum sorry bro i don't know it im in 6 grade
Which is NOT an example of labour intensive industry?
Healthcare practitioner
steel production industry
local farmers
small cakery
Answer:
small cakery
Explanation:
it only makes food it does not cut logs, wood etc.
Answer:
small cakery
Explanation:
cakery or bakery don't require labour services almostThere hardly one or two person works so it can't be called labour intensive industryMANUFACTURING QUESTION PLEASE HELP
Answer:
"He then pours the metal into a mold and allows it to solidify."
determine the moments of inertia of the quartercircular area about the x- and y- axes, and find the polar radius of gyration about point o.
What best describes the relationship between missionaries and Native Americans?
Answer:
Missionaries taught the Native Americans to read but allowed them to keep their customs. Native Americans and missionaries fought in battles
Explanation:
sorry if this doesn't help u but i hope it does!
can someone help showing the steps please
Answer:
a) 20 Ω
b) 1 A
c) 10 V on each
d) 1/3 A through each
e) 10 W in R1, 3 1/3 W in the others
f) 20 W
Explanation:
The three 30 Ω resistors are in parallel with each other, so will have an equivalent resistance of (30 Ω)/3 = 10 Ω.
(a) The total circuit resistance is 10 Ω + 10 Ω = 20 Ω.
__
(b) All of the current supplied by the battery passes through R1. The current supplied by the battery is ...
I = V/R = (20 v)/(20 Ω) = 1 A
__
(c) The voltage drop on R1 is (1 A)(10 Ω) = 10 v. Subtracting that from the battery voltage gives the voltage drop on the other resistors:
20 v -10 v = 10 v . . . . drop on R2, R3, R4
__
(d) The current through resistors R2, R3, R4 is ...
I = V/R = (10 v)/(30 Ω) = 1/3 A
__
(e) Power can be computed several ways. Here, it may be easiest to use ...
P = VI
For R1, that is P1 = (10 v)(1 A) = 10 W
For R2-R4, that is P2-P4 = (10 v)(1/3 A) = 10/3 W = 3 1/3 W
__
(f) The total power dissipated is the total power supplied:
P = VI = (20 v)(1 A) = 20 W
Adding up the power in the resistors, we get ...
P = 10 W + 3·(10/3 W) = 20 W
what are some benfits of getting involved with 4h
Answer:
the kids can get smarter and make the country where they live better
4h can help with making the next generation better, and better if we help them
At an open or uncontrolled intersection, yield if _____.
Need Help
in what flight condition is torque effect the greatest in a single-engine airplane?
Answer:
Low airspeed, high power, high angle of attack
a wire is not strong enough to pick up a washer or much of anything. what is a way to strengthen the magnetic field?
Answer:
making it straight and making it exercising every time
Situation: Peter is designing a new hybrid car that functions on solar power. He is currently working on sketches of his design using geometric patterns and shapes.
Answer:
whats the question?
Explanation:
below is an attempt at implementing a circle class. the class should feature a constructor that takes a starting radius, a float, and methods to calculate and return the area and circumference of the shape. can you fix the code below to implement these behaviors correctly?
monkey I'm not a dictionary so don't ask
why is a plastic or metal restrictor placed in either the end of the vent pipe or in the vapor-vent hose on some vehicles?
Answer:
To help the vehicle better function
Explanation:
The plastic or Metal material there is to block certain things that shift our of place and can get caught up in the vent, the materials prevent thing from entering in and out of the vent bc if anything should go in the vent it can cause severe vehicle problems
Hope this help❤