Answer:
Newton's laws of motion are three physical laws that, together, laid the foundation for classical mechanics. They describe the relationship between a body and the forces acting upon it, and its motion in response to those forces.
Explanation:
What are Newton's 1st 2nd and 3rd laws of motion?
In the first law, an object will not change its motion unless a force acts on it. In the second law, the force on an object is equal to its mass times its acceleration. In the third law, when two objects interact, they apply forces to each other of equal magnitude and opposite direction.
The image shows Earth’s orbit around the Sun.
An illustration with a circle representing the sun and a smaller circle representing a planet. The sun is at a focus of a draw ellipse that the planet is on. There are lines drawn radially out from the Sun to the elliptical path of the planet. The planet is at the part of the ellipse that is closest to the sun. The position of the planet is labeled W and the position opposite the planet is labeled X.
Which describes the changes in Earth’s motion?
The speed increases from W to X because a component of the gravitational force acts in the direction opposite to the velocity.
The speed increases from W to X because a component of the gravitational force acts in the direction of the velocity.
The speed increases from X to W because a component of the gravitational force acts in the direction opposite to the velocity.
The speed increases from X to W because a component of the gravitational force acts in the direction of the velocity.
(last choice)
The speed increases from X to W because a component of the gravitational force acts in the direction of the velocity.
D)The speed increases from X to W because a component of the gravitational force acts in the direction of the velocity.
Does gravitational force increase with distance?The gravitational force is inversely proportional to the square of the separation distance between the 2 interacting gadgets, extra separation distance will result in weaker gravitational forces. so as items are separated from every other, the pressure of gravitational attraction between them also decreases.
The force of gravity relies immediately upon the masses of the 2 gadgets, and inversely on the square of the gap between them. this means that the pressure of gravity will increase with mass, but decreases with growing distance among items.
Learn more about gravitational force here: https://brainly.com/question/72250
#SPJ2
Draw a picture showing the possible phases of the moon in this binary star
system, do they look the same or different from those we see in the sky in
reality? (You might want to think about scale and how far the suns would be
when considering your answer.)
(Help ASAP)
Which of the following is an example of electrical energy being changed to thermal energy?
HAIR DRYER
CAMP FIRE
Answer:
Hair dryer
Explanation:
The electrical energy from the outlet is converted to heat to dry hair. In a fair chemical energy is converted to heat instead.
help plz i need itttttttttttttt
Answer:
The answer is A or B. Sorry if incorrect. Hope this helps. :)
what is a zippper
awsedrftvgbhnjmk,l
Answer:
a jacket closing mechanism a most useful tool to preserve and protect.
Explanation:
Answer:
zip·per
/ˈzipər/
noun
a device consisting of two flexible strips of metal or plastic with interlocking projections closed or opened by pulling a slide along them, used to fasten garments, bags, and other items.
Which of the following is an example of light energy being changed to chemical energy?
Group of answer choices
A flashlight with rechargeable batteries
A solar panel that charges a battery
Food that is eaten to provide mechanical energy
Answer:
A solar panel
Explanation:
Indica en cada caso si estas fuerzas producen un efecto deformador o dinámico: a) Empujar un carro de la compra c) Atraer mediante un imán un clavo que estaba en reposo b) Modelar una figura de arcilla d) Lanzar una pelota de tenis
Answer:
Dynamic a, b and d
Deformer c and d
Explanation:
When a force is applied to an object, the acceleration may or may not change, which is analyzed from Newton's second law, this effect is a dynamic effect on the system; The environment can change the shape of the object, in this case the force creates a deformation in it.
With these clarifications let's analyze the different situations.
a) Dynamic. When pushing a car initially an acceleration is created in it, shortly after this decreases to zero and continues with constant speed.
b) Dynamic. When the nail moves it does not change the shape of the body that contains it, nor the shape itself, therefore the system can be analyzed with Newton's second law and the force is of the Dynamic type
c) Deformer. In this case the body (clay) has no net movement, but it does change its shape, so the effect of the force translates into a deformation of the system
d) Deformar and Dynamic. The launch of tennis balls has an initial deformation stage during the acceleration process, in this part the force is of the DEFORMING type, but during the trajectory the deformation disappears and the ball has (gravity) a DYNAMIC action
(Blank) is caused by plate motion.
It’s please help.
Answer:
heat
Explanation:
I dropped the ball from the roof of a building the speed when I hit the ground is 52 m/s how tall is the building
Answer:
Height of building = 135.2 m
Incident ray X passes parallel to the principal axis of a concave lens. Incident ray Y passes parallel to the principal axis of a convex lens.
How do the rays behave differently after passing through each lens?
Ray X continues moving in the same direction, and ray Y refracts and passes through the focal point located behind the lens.
Both rays refract and move as though they passed through the focal point.
Ray X appears as though it passed through the focal point in front of the lens, and ray Y passes through the focal point on the other side of the lens.
Both rays continue moving in the same direction.
Answer:
Explanation:
It would be option C. Ray x appears as though it passed through the focal point in front of the lens, and ray Y passes through the focal point on the other side of the lens.
Answer:
c. Ray X appears as though it passed through the focal point in front of the lens, and ray Y passes through the focal point on the other side of the lens.
Explanation:
Which of the following actions will induce an emf in a conductor?
a. Move a magnet near the conductor.
b. Move the conductor near a magnet.
c. Rotate the conductor in a magnetic field.
d. Change the magnetic field strength.
e. all of the above
Answer:
b . Move the conductor near a magnet
Answer:
(e) all the above....
Explanation:
That's all
Cause you know.......
True or False? Will mark Brainlest
Answer:
False
Explanation:
They had no free oxygen though they has oceans forming and it was very hot and today is much different hope that helps!
What are the advantages and Disadvantages of using Circuit Breakers Instead of Fuses
Answer:
Explanation:
Circuit breaker is an automatic electrical switch which cuts the power when there is surge in current.
Advantages of Circuit breaker
They are more reliable i.e. they are not replaced frequentlyEfficient and easy to safeguard electrical applianceDisadvantage of Circuit breaker
They are less sensitive than fuses i.e. fuses are much faster than circuit breaker.Answer:
The benefits are defined throughout the section described according to the particular context.
Explanation:
Just before it completes its function, users should substitute a fuse, although circuit breakers work through a trigger where you essentially restart or reboot. Fuses become composed of such a lump of material (metal) that can explode when enough electric current is passed through everything, disturbing another circuit successfully therefore stopping the equipment from hitting another power outage.At which point is the object not moving?
A
B
C
D
All of these.
None of these.
marcus is on a merry-go-round holding a string. you are standing next to him and holding the other end of the string so that the string forms a tangent line to the edge of the merry-go-round. if marcus is 2 meters from the center of the ride, what torque are you applying on him if you pull 30 N? _Nm
Answer: 60 nm
Multiply 30 and 2
PLEASE ANSWER QUICK I WILL DO BRAINLIEST.
The four objects are dropped from a balcony at the same time in a vacuum. (image)
amount of force: (f=ma)
feather: 0.006*9.8 = 0.0598 N
frisbee: 0.15*9.8 = 1.47 N
bowling ball: 5*9.8 = 49 N
golf ball: 0.04*9.8 = 0.392 N
Using Newton’s second law, explain which object will hit the ground with the most force? Use the calculations above to support your response.
Answer:
the bowling ball or the frisbee
Explanation:
I think it's the bowling ball or the frisbee. I am not really sure, so if you get it wrong I am extremely sorry!!
The fall of a body on the earth surface cannot be a complete free fall ? why
when we say Mohit has Blue Eyes which part of the ice is begin referred to US blue
Answer:
The iris
Explanation:
In the iris mohit have blue eyes Iris. The colored part of the eye which helps regulate the amount of light entering the eye. When there is bright light, the iris closes the pupil to let in less light. Ok so please mark me as brainleast
A meter stick is found to balance at the 49.7-cm mark when placed on a fulcrum. When a 41.5-gram mass is attached at the 28.5-cm mark, the fulcrum must be moved to the 39.2-cm mark for balance. What is the mass of the meter stick
Answer:
The value is [tex]M = 42.3 \ kg[/tex]
Explanation:
From the question we are told that
The first position of the fulcrum is x = 49.7 cm
The mass attached is [tex]m = 41.5 \ g[/tex]
The position of the attachment is [tex]x_1 = 28.5 \ cm[/tex]
The second position of the fulcrum is [tex]x_2 = 39.2 \ cm[/tex]
Generally the sum of clockwise torque = sum of anti - clockwise torque
So
[tex]CWT = m (x_2 - x_1)[/tex]
Here CWT stands for clockwise torque
[tex]ACWT = M ( x - x_2)[/tex]
So
[tex]m (x_2 - x_1) = M ( x - x_2)[/tex]
=> [tex]41.5 (39.2 - 28.5 ) = M ( 49.7 -39.2 )[/tex]
=> [tex]M = 42.3 \ kg[/tex]
Hello!
Define heredity, please.
Answer:
the sum of all biological processes by which particular characteristics are transmitted from parents to their offspring
which term describe the substance that forms when two or more types of atoms join?
A. element
B. compound
C. composite
D. mixture
Answer:
A. element
Explanation:
A molecule is formed when two or more atoms join together chemically. If atoms combine that are of two or more different elements, we call that a compound. All compounds are molecules, but not all molecules are compounds.
URGENTE : Un cuerpo de 8m³ flota en el agua. Si el volumen sumergido es de 5m³. Determina el modulo de la fuerza de empuje (en kn) que presenta
Answer:
La magnitud del empuje hacia arriba o fuerza hacia arriba que actúa sobre el cuerpo es 48,853 kN
Explanation:
Los parámetros dados son;
El volumen del cuerpo = 8 m.³
El volumen del cuerpo sumergido = 5 m³
Por el principio de Arquímedes, que establece que el empuje hacia arriba, [tex]F_b[/tex], actuar sobre un cuerpo en un fluido es igual al peso del fluido desplazado por el cuerpo
Matemáticamente, tenemos;
[tex]F_b[/tex] = ρ × g × V
Dónde;
ρ = La densidad del fluido = La densidad del agua = 997 kg / m³
g = La aceleración debida a la gravedad = 9,8 m / s²
V = El volumen del fluido desplazado = El volumen del cuerpo sumergido = 5 m.³
∴ [tex]F_b[/tex] = 997 kg / m³ × 9,8 m / s² × 5 m³ = 48,853 N = 48,853 kN (hacia arriba)
La magnitud del empuje hacia arriba o la fuerza hacia arriba que actúa sobre el cuerpo = 48,853 kN.
12. The diameter of a circle is 2.42m. Calculate its
area in proper significant figure
Answer:
A = 4.6 [m²]
Explanation:
The area of a circle can be calculated by means of the following equation.
[tex]A=\frac{\pi }{4} *D^{2}[/tex]
where:
A = area [m²]
D = diameter = 2.42 [m]
Now replacing:
[tex]A=\frac{\pi }{4} *(2.42)^{2} \\A = 4.6 [m^{2} ][/tex]
Which of the following situations is an example of kinetic energy being transformed into potential energy? Throwing a ball high into the air Dropping a ball from a ladder Rolling a ball on the ground Holding a ball in the air without moving it
Answer: holding the ball in the air without moving it
Explanation:
When the ball goes up it’s potential energy
Throwing a ball high into the air is an example of kinetic energy being transformed into potential energy.
What is kinetic energy ?"Kinetic energy is a form of energy that an object or a particle has by reason of its motion. If work, which transfers energy, is done on an object by applying a net force, the object speeds up and thereby gains kinetic energy."
What is potential energy ?"Potential energy is the energy held by an object because of its position relative to other objects, stresses within itself, its electric charge, or other factors."
Know more about potential energy here
https://brainly.com/question/24284560
#SPJ2
A hot air balloon holds 7.40 x 107 liters of gas. In order for the hot air balloon to rise into the sky, it must be heated to 120°C. Once the balloon is up in the air, the air needs to be cooled in order for the balloon to land. If the temperature of the balloon is decreased to 40.0°C, what will the new volume of the gas be?
Remember to pay close attention to the units of temperature before beginning your calculations.
Answer:
2.467×10^7 litres
Explanation:
Using the formula V1/T1 = V2/T2
V1 and V2 are the initial and final volume respectively
T1 and T2 are their respective temperatures
Given
V1 = 7.4×10^7litres
T1 = 120°C
T2 = 40°C
Required
V2
From the formula
V2 = V1T2/T1
V2 = 7.4×10^7(40)/120
V2 = (7.4×10^7)/3
V2 = 2.467×10^7 litres
Hence the new volume of the gas will be 2.467×10^7 litres
As you enter the lab, you find two bottles labeled "concentrated ammonium phosphate." In one paragraph, using your own words, describe the steps you could take to change one of the bottles into a diluted solution, and one of the bottles into a saturated solution.
Answer:
Butane is a four member carbon chain.
The properties of butane are as follows.
Butane is less denser than water.
In the presence of air, it readily burns to form water vapour and carbon dioxide. The reaction is as follows.
It has a boiling point of .
Butane has faint petroleum like odor.
Butane does not react with water.
Butane has weak dispersion force and water has strong hydrogen bonding. The weak dispersion force is unable to break the hydrogen bonding hence, butane does not dissolve in water.
Thus, we can conclude that the chemical properties butane burns readily in air and does not react with water are true out of the given list of options.
Explanation:
In raising an object vertically at a constant speed of 2 m / s 10 watts of power is developed the weight of the object is
Answer:
5NExplanation:
Power = Workdone/Time
Since workdone = Force * distance = mgh
Power = mgh/t
Given
Power = 10watts
speed = 2m/s
Power = Weight * velocity
Substitute
10 = Weight * 2
Weight = 10/2
Weight = 5N
Hence the weight of the object is 5N
Does temperature affect whether or not a current voltage graph curves?
Answer:
Current-voltage (I-V) characteristics for components
The relationship between current through, and voltage across, a component is called the current-voltage (I-V) characteristic.
Resistor at constant temperature
For a fixed resistor, the voltage is directly proportional to the current. Doubling the amount of energy into the resistor results in a current twice as fast through the resistor. This relationship is called Ohm's Law and is true because the resistance of the resistor is fixed (because the temperature does not change).
Which electron dot diagram shows the bonding between 2 chlorine atoms?2 dots then C l with 2 dots above and 1 dot below then 2 dots then 2 dots then C l with 2 dots above and 1 dot below then 2 dots.2 dots then C l with 2 dots above and 2 dots below then 2 dots then C l with 2 dots above and 2 dot below then 2 dots.2 dots then C l with 2 dots above and 2 dots below then 1 dot then C l with 2 dots above and 2 dots below then 2 dots.2 dots then C l with 2 dots above and 1 dot below then 3 dots then 3 dots then C l with 2 dots above and 1 dot below then 2 dots.
Answer:
It is B
Explanation:
Answer: 2nd answer
Explanation: took exam
where is the centre of mass of a system of two particles is situated?
Answer:
In a two particle system, the center of mass lies on the center of the line joining the two particles.