Answer:
... lose kinetic energy and move slowly.
Melting can be best described as a process in which molecules gain enough kinetic energy to get past each other.
What statements are always true about limiting reactants?
Select one or more:
1.The limiting reactant has a lower mass than other reactants.
2.The limiting reactant dictates the amount of product.
3.The limiting reactant is always the same for a given reaction.
4.There will be an excess of other reactants at the end of the reaction.
5.The limiting reactant is completely used up in the reaction.
Answer:
5.The limiting reactant is completely used up in the reaction
Explanation:
The limiting reactant is completely used up in the reaction is the correct answer because a limiting reactant is a reactant in chemical reaction that is completely consumed or used up in the chemical reaction. Limiting reactant when it is completely used up limits the amount of products that will be formed. The reaction will be halted or will stop when the limiting reactant is totally used up.
The statement that is right as regards a limiting reactants in a reaction is 5:.The limiting reactant is completely used up in the reaction.
The limiting reagent can be regarded as a reactant during chemical reaction, which is been consumed totally at the end of the reaction without remains. The amount of product that is formed during a reaction can be limited by action of the limiting reagent this is because once this reagent is used up the reaction cannot proceed again.Therefore, option 5, is correct.
Learn more at:https://brainly.com/question/19031443?referrer=searchResults
OTHER OPTIONS THAT COMPLETE THIS QUESTION ARE:
The limiting reactant has a lower mass than other reactants.
2.The limiting reactant dictates the amount of product.
3.The limiting reactant is always the same for a given reaction.
4.There will be an excess of other reactants at the end of the reaction.
Giselle is working with a chemical substance in a laboratory. She observes that when the chemical is heated, it gives off a gas. She assumes that the gas is oxygen but decides to test this assumption to verify it. Which type of scientific knowledge is Giselle’s assumption? A. fact B. hypothesis C. law D. observation E. theory
Answer:
The correct answer is B. Hypothesis
Explanation:
If I Gave A Pig Bacon Would He Eat It ?
When the volume of a gas is
changed from 3.6 L to 15.5 L, the
temperature will change from
°C to 87°C.
Assume that the number of moles and the
pressure remain constant.
Be sure to notice that temperatures are
given in °C!
Initial temperature = -189.4 °C
Further explanationGiven
the volume of a gas is changed from 3.6 L to 15.5 L
final temperature = 87 °C = 87+ 273 = 360 K
Required
initial temperature
Solution
Charles's Law
When the gas pressure is kept constant, the gas volume is proportional to the temperature
[tex]\tt \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]
[tex]\tt T_1=\dfrac{V_1.T_2}{V_2}\\\\T_1=\dfrac{3.6\times 360}{15.5}\\\\T_1=83.6~K=-189.4^oC[/tex]
Will give brainliest
Answer:
C
Explanation:
The concept behind, is mole ratio of Al:FeO
Based on the chemical equation, use the drop-down menu to choose the coefficients that will balance the chemical equation:
(
)BaO2 + (
)H2SO4 → (
)H2O2 + (
)BaSO4
Answer:
1
1
1
1
Explanation:
the equation is balancing
what is a common use for electromagnets
Answer:
Electromagnets are widely used as components of other electrical devices, such as motors, generators, electromechanical solenoids, relays, loudspeakers, hard disks, MRI machines, scientific instruments, and magnetic separation equipment.
Explanation:
Hope this helps :)
(didn't get this from the internet)
6b
Which of the following is a starting compound during
cellular respiration?
Answer: Oxygen and glucose.
Explanation:
Oxygen and glucose are both reactants in the process of cellular respiration. The main product of cellular respiration is ATP; waste products include carbon dioxide and water.Jun 1, 2020
The larges lakes in the world are found in:
A. Asia
B. Europe
C. North America
D. South America
punnet squares, help how do I do this
Explanation:
Im not sure what the other trait is so I couldn't do phenotype. I hope this still helps though
Describe how the periodic
table is organized and how
that organization increases
its usefulness (hint: think
about how the position of an
element in the table matters)
Answer:
Elements in the periodic table are arranged according to the increasing atomic number.
We can predict the chemical properties of an element by looking at it's position in the periodic table.
The concentration of CI ion in a sample of H,0 is 15.0 ppm. What mass of CI ion is present in 240.0 mL of H,0, which has a density of 1.00 g/mL?
Answer:
Mass of solute = 0.0036 g
Explanation:
Given data:
Concentration of Cl⁻ = 15.0 ppm
Volume of water = 240 mL
Mass of Cl⁻ present = ?
Solution:
1 mL = 1 g
240 mL = 240 g
Formula:
ppm = mass of solute / mass of sample ×1,000,000
by putting values,
15.0 ppm = (mass of solute / 240 g) ×1,000,000
Mass of solute = 15.0 ppm × 240 g / 1,000,000
Mass of solute = 0.0036 g
Based on the principle of complementary colors, which colors or wavelengths of light would you expect to be most strongly absorbed by Cu2 ions?
Answer:
Red and Orange
Explanation:
Complementary colors are those colours located across from each other on a color wheel. If we look at the colour wheel attached to this answer, we will see various complementary colours shown.
A good look at the attached colour wheel reveals that blue Cu2+ ions absorbs light around the red and orange portions of the visible spectrum.
An s orbital has how many orientations? Group of answer choices
Answer:
One orientation
Explanation:
A s orbital is a sphere like shape that surrounds the atomic nucleus that consists of electrons that can be found at the highest or lowest region of the orbital. S orbitals only consist of "one orientation" and is commonly mistaken by the p orbital because the p orbital also consists of electrons that can be found the most.
Hope this helps.
Which pair of elements will form a covalent bond? A. Aluminium and Chlorine B. Carbon and Sulfur C. Lithium and Oxygen D. Potassium and Chlorine
Explanation:
Aluminum and chlorine form covalent bond.
Therefore,
Option A is correct✔
Potassium Phthalate, KC8H604, is a main source of whistle fuel for many fireworks. A standard firework had 25g of potassium phthalate. Calculate the following:
The molar mass of the compound.
How many molecules of fuel there are
The number of moles of Carbon
Answer:
Explanation:
The given compound is:
KC₈H₆O₄
Mass of the compound = 25g
Molar mass of the compound
KC₈H₆O₄
Atomic mass of K = 39
C = 12
H = 1
O = 16
Molar mass of the compound = 39 + 8(12) + 6 (1) + 4(16)
= 205g/mol
Number of molecules of fuel there in:
Find the number of moles then convert this to number of molecules;
Number of moles = [tex]\frac{mass}{molar mass}[/tex]
Number of moles = [tex]\frac{25}{205}[/tex] = 0.12mol
1 mole of a compound contains 6.02 x 10²³ molecules
0.12 mole of the phthalate will contain 0.12 x 6.02 x 10²³ =
7.34 x 10²²molecules
Number of moles of Carbon
1 mole of the phthalate contains 8 mole of carbon
0.12 mole of the phthalate will contain 0.12 x 8 = 0.96mole of carbon
An amusement park charges $27 for adult tickets (a) and $24 for children's tickets (c). Last Friday the amusement park sold 272 tickets and collected $7,137. Which of the following systems of equations is a correct representation of this data?
Answer:
a+c=272
27a+24c=7,137
Explanation: Hope this helps!!!
Pieces of DNA that pass genetic traits from parent to offspring
A. Phenotype
B. Gene
D. Allele
Answer:
gene
Explanation:
PLEASEEE HELP ?!?!?!
which of the following processes provide evidence of the particulate nature of matter
I. Diffusion
II. Filtration
III. Osmosis
A. I and II only
B. I and III only
C. II and III only
D. I, II and III
Answer:
B
Explanation:
I think the answer is Diffusion and Osmosis
The processes that provide evidence of the particulate nature of matter would be diffusion and osmosis.
Matter is defined as anything with mass/weight and able to occupy space. Matters could be molecules of solid, liquid, or gases. The molecules of each category of matter have their specific characteristics.Molecules of liquids and gases are able to diffuse. Diffusion is defined as the movement of molecules from the region of high concentration to the region of low concentration. Molecules of solids in the dissolved form are also able to diffuse. Water molecules are also able to move from the region of high to the region of low water potentials by osmosis in the presence of a semi-permeable membrane.Thus, both diffusion and osmosis back up the particulate nature of matter.
More on the particulate nature of matter can be found here: https://brainly.com/question/15230454?referrer=searchResults
True or False: Most metals are found to occur naturally in their uncombined states.
Answer:
I think it's true. But I'm not sure
Answer:
True
Explanation:
which group or groups of atoms are the only atoms with f orbitals?
Answer:
Lanthanides and Actinides
Explanation:
A nuclear power plant produces huge amount of electricity. However, it dumps radioactive wastes into the sea. This has led to an increase in illness among people living along the coast. Which of these is the best method to solve this problem?
Question 1 options:
Convert the nuclear power plant into a hydroelectric power plant which does not produce wastes.
Shift the nuclear power plant to locations far away from the sea.
Increase public awareness to close the nuclear power plant.
Provide the nuclear power plant with a plan to properly dispose of and recycle the wastes.
Answer: Provide the nuclear power plant with a plan to properly dispose of and recycle the wastes.
Explanation:
The nuclear power plant is producing huge amounts of electricity which is beneficial to the economy as it pushes growth. Shutting it down or relocating it is therefore not the right solution.
The problem is the radioactive waste being produced so a solution that is specific to this problem should suffice. That solution would be the provision of the nuclear plant with plans to properly dispose of the waste.
Should this happen, the nuclear plant can still stay in the same area and keep contributing to economic growth without adversely affecting people's heath.
Answer: yup the correct answer is c
Explanation:
For the reaction below, if the rate of appearance of Br2 is 0.180 M/s, what is the rate of disappearance of
NOBr?
2 NOBr(g) → 2 NO(g) + Br2(g)
a. –0.360 M/s
b. –0.090 M/s
c. 0.090 M/s
d. 0.180 M/s
e. 0.720 M/s
Answer:
–0.360 M/s
Explanation:
Which of the following elements has six valence electrons?
Be
B
C
N
O
Plz help
Plz and thank u
What is electronegativity?
Explain the periodic trend -
what is it, why is it that way
Answer:
Electronegativity is a measure of the tendency of an atom to attract a bonding pair of electrons. The Pauling scale is the most commonly used. Fluorine (the most electronegative element) is assigned a value of 4.0, and values range down to caesium and francium which are the least electronegative at 0.7.
Explanation:
Major periodic trends include: electronegativity, ionization energy, electron affinity, atomic radius, melting point, and metallic character. ... These trends exist because of the similar atomic structure of the elements within their respective group families or periods, and because of the periodic nature of the elements
Determine the pH of a 2.0 x 10-2 M Sr(OH)2 solution.
pH of the Sr(OH)₂ solution : 12.6
Further explanationpH is the degree of acidity of a solution that depends on the concentration of H⁺ ions. The greater the value the more acidic the solution and the smaller the pH.
pH = - log [H⁺]
Sr (OH) ₂ solution is a base with valence 2, so we determine the pOH from the OH ion concentration - which is expressed by pOH = - log [OH -]. After that we determine the pH value from the relationship:
[H⁺] [OH⁻] = Kw=10⁻¹⁴
pH + pOH = 14
Sr(OH)₂⇒Sr²⁺+2OH⁻
From equation [Sr(OH)₂] : [OH⁻]=1 : 2, so [OH⁻]=
[tex]\tt [OH^-]=2\times 2.10^{-2}=4.10^{-2}~M[/tex]
[tex]\tt pOH=-log[OH^-]\\\\pOH=-log~4.10^{-2}\\\\pOH=2-log~4\rightarrow 1.398 \\\\pH+pOH=14\\\\pH=14-1.398\\\\pH=12.6[/tex]
pH is the measurement of the concentration of hydrogen or hydronium ion in an aqueous solution. The pH of strontium hydroxide is 12.6.
What is pH?The pH is the potential of hydrogen or the negative log of its concentration.
First, calculate the pOH of strontium hydroxide by:
[tex]\begin{aligned} \rm pOH &= \rm - log [OH ^{-}]\\\\&= \rm -log [4\times10^{-2}]\\\\&= 1.398\end{aligned}[/tex]
Now, calculate pH from pOH as:
[tex]\begin{aligned}\rm pH &= 14 - \rm pOH\\\\&= 14 - 1.398\\\\&= 12.6\end{aligned}[/tex]
Therefore, 12.6 is the pH of strontium hydroxide.
Learn more about pH here:
https://brainly.com/question/10725749
please help me i will give brain list
Answer:
a. pentane = C5H12
b. Heptane = C7H16
c. Hexyne = C6H10
d. Octene = C8H16
e. Nonane = C9H20
Hope it helps.
1-pentene
Molecular Formula C5H10
Condensed Structural FormulaCH2=CH(CH2)2CH3
Melting Point (°C)–138
Boiling Point (°C)30
2- heptane is the straight-chain alkane with the chemical formula H3C(CH2)5CH3 or C7H16, and is one of the main components of gasoline (petrol).
Bruh I hate science Pls help me
List 5 physical properties of matter.
What is a chemical property?
List 2 chemical properties.
What is the difference between chemical property and chemical change?
List 3 products that are the results of chemical reactions.
Answer:
1. The properties of matter include any traits that can be measured, such as an object's density, color, mass, volume, length, malleability, melting point, hardness, odor, temperature, and more.
2. A chemical property is a characteristic of a particular substance that can be observed in a chemical reaction.
3. Toxicity and acidity.
4. A chemical property describes the ability of a substance to undergo a specific chemical change. A chemical reaction is a process that occurs when one or more substances are changed into one or more new substances.
5. The five basic types of chemical reactions are combination, decomposition, single-replacement, double-replacement, and combustion. Analyzing the reactants and products of a given reaction will allow you to place it into one of these categories. Some reactions will fit into more than one category.
Hope this helps you~
Which elements are considered metals? Non-metals? Metalloids?
The answer is in the photo.