Na3(PO4) + HCl yields NaCl + H3(PO4)​

Answer:

112.18 g.

Explanation:

you're using stoichiometry to find the mass of the compound S₃O.

Answer:

37.1g are produced

Explanation:

The combustion of C₈H₁₈ is:

C₈H₁₈ + 25/2O₂ → 8CO₂ + 9H₂O

Where 1 mole of C₈H₁₈ produce 8 moles of CO₂

To find the mass of CO₂ that is produced we need to convert the mass of C₈H₁₈ with molar mass. Then, with the chemical equation, we can find the moles of CO₂ and its mass, as follows:

Moles C₈H₁₈ -Molar mass: 114.2g/mol-

12g C₈H₁₈ * (1mol / 114.2g) = 0.105 moles of C₈H₁₈

Moles CO₂:

As 1 mole of C₈H₁₈ produce 8 moles of CO₂, 0.105 moles of C₈H₁₈ produce:

0.105 moles of C₈H₁₈ * (8moles CO₂ / 1mole C₈H₁₈) = 0.84 moles of CO₂

Mass CO₂ -Molar mass: 44.01g/mol-:

0.84 moles of CO₂ * (44.01g / mol) = 37.0g of CO₂ ≈

Answer:

Dust and smoke.

Explanation:

Dust and smoke are two different particles present in the air. Dust and smoke are different from one another due to their origin. Smoke formed from burning of materials while dust refers to the soil particles lifted by the wind due to their light weight. Dust and smoke are similar to each other due to their small in size, infinite number means uncountable and light weight.

Air is a mixture of gases and consists of dust particles and water vapor. It consists of small to very large size of particles. Some of them include dust pollen, soot, and liquid droplets.

Hence they both differ.

Learn more about the two different particles found in the air.

brainly.in/question/35683807.

Answer:

At standard temperature and pressure, hydrogen is a colorless, odorless, and tasteless gas. Hydrogen is very flammable and burns with an invisible flame. It burns when it comes into contact with oxygen. The byproduct of a hydrogen and oxygen explosion is water or H2 O.

Answer:

reverse osmosis

Explanation:

Water treatment is often complicated because it deals with the chemical makeup of the water, which varies widely. The first step is to determine what contaminants should be removed. Unfortunately, this is not always a straightforward process. Many contaminants make themselves known in obvious ways, such as iron or hydrogen sulfide, which can cause taste and odor issues. Other contaminants, such as arsenic or pesticides, are only uncovered through a sophisticated laboratory analysis.

It is important to test the water so that the right type of treatment system can be selected. Keep in mind, however, that more than one analysis may be necessary to get a baseline because water quality fluctuates. More information on possible contaminants in a specific area can be obtained by talking to residents, the local health department, the water department, or the state geological society. In addition, your laboratory should be able to recommend appropriate tests based on a customer’s concerns and the information provided about the water source. It is important not only to address customers’ concerns but also to educate them about potential contaminants they may not have considered.

Answer:

radians

Explanation:

Answer:

Meters per second.

Explanation:

Ap3x approved

Answer:

unbalanced moving to the right is the awnser

Answer:

unbalanced moving to the right i think

Explanation:

Answer:

PCl₅ = 208.22g/mol. UF₆ = 352.03g/mol.

Explanation:

Find the atomic mass of each element–and if there's a subscript (you multiply the atomic mass by that much). P= 30.97g, Cl= 35.45g; 30.97+35.45(5) = 208.22g [same idea with UF₆]

The balanced reaction is

4 Al + 3 O₂   →   2 Al₂O₃

so that for every 4 moles of Al and 3 moles of O2, you end up with 2 moles of Al₂O₃.

• Al has molar mass ≈ 26.982 g/mol

• O has molar mass ≈ 15.999 g/mol

• Al₂O₃ thus has molar mass ≈ 101.961 g/mol

You start with 5.4 kg = 5,400 g of Al, or

(5.4 kg Al) • (1/26.982 mol/g) ≈ 200.133 mol Al

Al₂O₃ is produced in a ratio of 2 moles to every 4 moles of Al, so you end up with about 100.067 mol Al₂O₃, which has a mass of

(100.067 mol Al₂O₃) • (101.961 g/mol) ≈ 10,202 g = 10.2 kg

so the answer is C.

1.1 × 10²² atoms Au

Chemistry

Atomic Structure

Math

Pre-Algebra

Order of Operations: BPEMDAS

Step 1: Define

3.7 g Au

Step 2: Identify Conversions

Avogadro's Number

Molar Mass of Au - 196.97 g/mol

Step 3: Convert

[tex]3.7 \ g \ Au(\frac{1 \ mol \ Au}{196.97 \ g \ Au} )(\frac{6.022 \cdot 10^{23} \ atoms \ Au}{1 \ mol \ Au} )[/tex] = 1.13121 × 10²² atoms Au

Step 4: Check

We are given 2 sig figs. Follow sig fig rules and round.

1.13121 × 10²² atoms Au ≈ 1.1 × 10²² atoms Au

Answer:

Cause/ effect relationship.

Explanation:

because the force is the cause of energy that is present and velocity is the effect (speed) that is present.

Answer:

The light microscope bends a beam of light at the specimen using a series of lenses to provide a clear image of the specimen to the observer.

Answer:

Poor Science

Explanation:

I took the quiz also just think that doesn't seem like a good, higher level scientist, or popular one, SO THERE YOU GUYS GO!!!

Answer:

poor science

Explanation:

Answer:

Chemical change

Explanation:

Because it will be 2 mixtures of each substances making it 1 substance, and 1 change.

Answer:

Fluids can flow because their molecular structure is different. Instead of being tightly packed, like a solid, there are fewer molecules per unit in a liquid than a solid. This gives the molecules of a liquid space to move around, and it flows because liquids take the shape of their container(s). These molecules usually tend to bump into each other and this causes the liquid to move as well

Answer:

Because the particles don't move, solids have a definite shape and volume, and can't flow. LIQUIDS - This means that liquid particles are further apart and can move about more easily. Since the particles can move, the liquid can flow and take the shape of its container.

Explanation:

hope this helps

Mole measure the number of elementary entities of a given substance that are present in a given sample. To find mass of 2.25 mol of the element Iron (Fe), we multiply 2.25 mol by (55.84g divided by 1 mol). Therefore option c is correct option.

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance.

Mathematically,

Mole of Fe element=  mass of Fe element÷ Molar mass of Fe element

mass= Mole of Fe element ×Molar mass of Fe element

Substituting the given values in above formula we get

mass= 2.25 mol× 55.84 g/mole

mass= 2.25 mol× 55.84 g/mole

To find mass of 2.25 mol of the element Iron (Fe), we multiply 2.25 mol by (55.84g divided by 1 mol).

Therefore option c is correct option.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ2

Volume of Sodium metal : 20.454 ml

Reaction(balanced) :

2Na + 2H₂O → 2NaOH + H₂

mass NaOH = 34.5 g

mol NaOH(MW=40 g/mol) :

[tex]\tt mol=\dfrac{mass}{MW}\\\\mol=\dfrac{34.5}{40}\\\\mol=0.8625[/tex]

From the equation, mol ratio of Na : NaOH = 2 : 2, so mol Na=mol NaOH=0.8625

Mass Na (Ar=23 g/mol):

[tex]\tt mass=mol\times MW\\\\mass=0.8625\times 23\\\\mass=19.84~g[/tex]

Volume Na :

[tex]\tt V=\dfrac{m}{\rho}\\\\V=\dfrac{19.84~g}{0.97~g/ml}\\\\V=20.454~ml[/tex]

Explanation:

Gravitational potential energy

= mgh = (45kg)(9.81N/kg)(2m) = 882J.

The sled’s potential energy is 882 J.

The potential energy of the sled is calculated using the following formula as shown below;

P.E = mgh

Where;

P.E = 45 x 9.8 x 2

P.E = 882 J

Thus, the sled’s potential energy is 882 J.

Learn more about potential energy here: https://brainly.com/question/1242059

Answer:

Option 2

Explanation:

Answer:

4104 Coulombs

Explanation:

charge = time(sec) *current

25*60 =1500+20=1520

2.7A * 1520 sec =4104

4104 C

Answer: 2) Chloroform & Caustic potash

Explanation:

The carbylamine reaction is a kind of chemical test which is done to detect primary amines in an unknown solution. It cannot detect secondary and tertiary amines.

The reaction involves the heating with up of the unknown solution with alcoholic potassium hydroxide or caustic potash and the chloroform.

In the presence of primary amine, the production of isocyanide results.

Answer:

detail is given below.

Explanation:

The charged particles of nucleus are protons while neutrons are neutral having no charge.

We know that an atom consist of electrons, protons and neutrons. Neutrons and protons are present inside the nucleus while electrons are present out side the nucleus.

Electron has a negative charge and is written as e⁻. The mass of electron is 9.10938356×10⁻³¹ Kg . While mass of proton and neutron is 1.672623×10⁻²⁷Kg and 1.674929×10⁻²⁷ Kg respectively.

Symbol of proton= P⁺  

Symbol of neutron= n⁰  

The number of electron or number of protons are called atomic number while mass number of an atom is sum of protons and neutrons.

one proton contribute 1 amu to the total weight. There are 20 protons and 20 neutrons in Ca thus its atomic mass is 40 amu.

While the atomic number is 20.

Answer: silver reduced, gold oxidized

Explanation:

Answer:

D

Explanation:

Answer:

Hydrogen bond strengths range from 4 kJ to 50 kJ per mole of hydrogen bonds. In molecules containing N-H, O-H or F-H bonds, the large difference in electronegativity between the H atom and the N, O or F atom leads to a highly polar covalent bond (i.e., a bond dipole).

Explanation:

Answer:

This would give us Helium 4.

Explanation:

Lithium7 has 3 protons, 4 neutrons and 3 electrons.

Removing  1 Proton 1 electron and 2 neutrons would form an element with

2 protons 2 electrons and 2 neutrons.

This is Helium 4.

1.Atomic Number (Z) = Mass Number (A) - Number of Neutrons

neutrons = mass number-atomic number

Atomic mass Cl-37= 17

Mass number Cl-37=37

Neutrons = 37-17=20

2. Mass atom X = mass isotope 1 . % + mass isotope 2.%...

[tex]\tt atomic~mass~X=0.0224\times 88+0.7832\times 90+0.1944\times 91=90.1[/tex]

3. The energy in one photon can be formulated as

[tex]\large{\boxed{\bold{E\:=\:h\:.\:f}}}[/tex]

f = c / λ, so :

[tex]\tt E\approx f\approx \dfrac{1}{\lambda}[/tex]

Energy is directly proportional to frequency and inversely proportional to the wavelength

So, as the frequency of photon increases, the energy of photon increases

4. Based on answer number 3 :

A. The wavelength becomes longer, and the energy decreases

Answer:

Mass = 0.084 g

Explanation:

Given data:

Mass of silicon = ?

Number of atoms of silicon = 1.8 × 10²¹ atom

Solution:

Avogadro number:

The given problem will solve by using Avogadro number.

It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance.  The number 6.022 × 10²³ is called Avogadro number.

1 mole = 6.022 × 10²³  atoms

1.8 × 10²¹ atom × 1 mole /  6.022 × 10²³  atoms

0.299× 10⁻² mol

0.00299 mol

Mass of silicon:

Mass = number of moles × molar mass

Mass = 0.00299 mol × 28.1 g/mol

Mass = 0.084 g