Answers
Explanation:
s=2
p=6
d=10
f=14
I hope this was helpful
Related Questions
3. Materials that easily break when a force is applied like glass are said to be
A. malleable B: brittle C. ductile D. elastic
4. Which of the materials below is a poor conductor of heat?
A Iron B. Wood C. Gold D. Copper
5. is the characteristic or trait that can be observed when a matter reacts to
another substance,
A. Intensive Physical Property
C. Chemical Property
B. Extensive Physical Property D. Physical Property
6. property is the characteristic or trait of matter that does not depend on the amount.
A. Intensive Physical Property
C. Chemical Property
B. Extensive Physical Property D. Physical Property/
7. is the characteristic or trait of matter that can be observed or perceived with our senses easily
without changing its chemical composition.
A Intensive Physical Property
C. Chemical Property
B. Extensive Physical Property D. Physical Property
8. Phase of matter where particles are relatively far apart and practically independent of each other.
A. Solid B. Liquid C. Gas D. Plasma
Cloccify the following pyamnles as pure substance or mixture:
Answers
Answer:
3. B
4. B
5. C
6. A
7. D
8. C
Explanation:
3. A material or substance is said to be BRITTLE If it can be broken easily when there is an application of force e.g glass
4. A material that cannot conduct heat and electricity is called an INSULATOR. Among the given options, WOOD is a poor conductor of heat i.e. it cannot withstand hear. Iron, gold and copper are all metals, hence, very good conductors.
5. Matter which constitutes all substances tend to react with one another, however, when the observed trait or characteristic is called a CHEMICAL PROPERTY.
6. Physical property of matter can either be intensive or extensive. INTENSIVE PHYSICAL PROPERTY is that characteristic or trait of matter that does not depend on the amount. Example is temperature, density etc
7. PHYSICAL PROPERTY is the property of matter that can be observed or perceived with our senses easily without changing its chemical composition or nature. Example of physical property is melting.
8. Matter exists in three states; solid, gas and liquid. In the GASEOUS state of matter, particles are relatively far apart or scattered and practically independent of each other. This allows gas to be able to diffuse.
Video Worksheet
Cosmos S1E5 = Hiding in the Light
Answers
Answer:
ill try
Explanation:
Fill in the blanks with its definition or description.
a. _________ The point in a titration when the added amount of standard reagent is equal to the amount of analyte being titrated.
b. _________The analyte is titrated with the standard reagent and the volume of standard solution required to complete the reaction is measured.
c. _________A reagent that is pure and stable, which can be used directly after weighing.
d. _________The analyte that is being analyzed in the titration.
e. _________Standard reagent is added in excess to ensure complete reaction with the analyte.
f. _________The excess reagent is then titrated with a second standard reagent.
g. _________A solution, whose concentration is known, often made from a reagent of known purity.
h. _________The standard reagent of known concentration that is added from a buret to the analyte solution.
i. _________The analyte does not react directly with the titrant so it is converted to another form which will react with the titrant.
j. _________The point in a titration when a change in the analyte solution is observed, indicating equivalency.
k. _________It is added to the analyte solution and aids in the observation of the completion of the reaction.
Answers
Answer:
a) equivalence point
b) direct titration
c) primary standard
d) titrand
e) Back titration
f) back titration
g) standard solution
h) standard solution
I) indirect titration
j) end point
Explanation:
A volumetric analysis is one in which a solution of unknown concentration is determined from its volume. This is commonly referred to as titration.
In titration, a standard solution is reacted with another solution of unknown concentration. The point at which the concentration of the standard solution is equal to that of the analyte is known as the equivalence point (usually indicated by a colour change). An indicator may be added to the analyte solution to help identify when the reaction is complete.
Definitions of heat and work
Answers
Answer:
Hear is the transfer of thermal energy between system.
Work is the transfer of mechanical energy between two systems.
How do you write 0.714 in scientific notation
Answers
Answer:
0.714 in scientific notation is 7.14 × 10-1.
Answer: m × 10n, where m is a number between 1 and 10 ( 1 ≤ |m| < 10 ) and the exponent n is a positive or negative integer.
Explanation:
1) Move the decimal 1 times to right in the number so that the resulting number, m = 7.14, is greater than or equal to 1 but less than 10
2) Since we moved the decimal to the right the exponent n is negative
n = -1
3) Write in the scientific notation form m × 10n
= 7.14 × 10-1
Therefore,
7.14 × 10-1 is the scientific notation form of 0.714 number and 7.14e-1 is the scientific e-notation form for 0.714
heat and light travel in
Answers
Answer:
Explanation:
All forms of energy that may move in waves, including as light, x-rays, radio signals, heat, and microwaves, are included in the electromagnetic spectrum. These waves all have an abundance of energy in them. Additionally, they can all fly through outer space.
Light energy is a type of electromagnetic energy, while heat energy is a type of kinetic energy made up of the random motion of a material's particles. This is the main distinction among light energy and heat energy. Despite the fact that light and heat are both forms of energy, both are not the same. All forms of energy that may move in waves, including as light, heat, x-rays, radio signals, ultraviolet waves, and microwaves, are included in the electromagnetic spectrum. These waves all have an abundance of energy in them. Additionally, they can all fly through outer space.
To know more about heat and light, here:
https://brainly.com/question/24822610
#SPJ6
Write a balanced chemical equation (using subscripts and an arrow) and noting all physical states for the reaction of chlorine gas and ozone gas (O3) to produce chlorine monoxide gas and oxygen gas.
Answers
Answer:
O3 => CLO + O2
Explanation:
ozone gas yields one Chlorine Monoxide gas, and two Oxygen gas. i forgot how to explain it well, but I know how to do it and will help in the future if needed :)
How many moles in 6.4 g of H2O?
46 mol
124 mol
.025 mol
.36 mol
Answers
Explanation:
Given
Weight of Water (H2O) = 6.4 gms
To find
Number of moles of water = ?
Solution
we know that molar mass of H2O = 18 g
Now,
[tex]Number \: of \: moles =\frac{Given \: weight \: of \: substance}{molar \: mass \: of \: substance} [/tex]
Number of moles = 6.4/18 = 0.355~ 0.36 moles
Thanks for joining brainly community
Answer:
Explanation:
h2o = 18 gmol-1
1mol =18 g
18 g =1mol
6.4g =1/18*6.4
= 0.355
=0.36mol
How should scientists set up the control group in this experiment?
Answers
Answer:
Please show a file so I can answer your question or tell me which experiment.
Explanation:
Definition:The control group (sometimes called a comparison group) is used in an experiment as a way to ensure that your experiment actually works. It's a way to make sure that the treatment you are giving is causing the experimental results, and not something outside the experiment.
a particular graduated cylinder contains 24.0 mL Br2(liquid). The density of bromine at 25 degrees C is 3.12g/cm^3. Note that in nature, elemental bromine exists in diatomic form(that is, as Br2)
How many representative particles(molecules of Br2) are in the cylinder?
Answers
Answer:
[tex]2.82x10^{23}molecules[/tex]
Explanation:
Hello.
In this case, given the volume (1cm³=1mL) and density of the bromine we are to firstly compute the mass since it will allow us to compute the representative particles:
[tex]\rho =\frac{m}{V}[/tex]
[tex]m=\rho *V=3.12g/cm^3*24.0cm^3\\\\m=74.88gBr_2[/tex]
Next, since the mass of one mole of diatomic bromine is 159.82 g (one bromine weights 78.91), we can next compute the moles in that sample:
[tex]n=74.88g*\frac{1mol}{159.82g} =0.469molBr_2[/tex]
Finally, via the Avogadro's number we can compute the representative particles of bromine as follows:
[tex]particles=0.469mol*\frac{6.022x10^{23}molecules}{1mol}\\ \\2.82x10^{23}molecules[/tex]
Best regards.
6. When 45.0 g of water is heated from 25.0 0C to 40.0 °C, how much energy was absorbed
during the process?
Help please due 11:59 tonight
Answers
Answer:
2835J
Explanation:
Q = mcΔT
Given,
Q = ?m = 45.0 gc = 4.2ΔT = 40-25 = 15°CQ = 45 × 4.2 × 15
Q = 2835 J
how do i draw these lines?
Answers
bro is that genius cast that's an easy line
I can easily draw that
How many particles are in 56 L of nitrogen gas at standard conditions?
0 1.2 x 1023 particles
O 2.5 particles
O 1.5 x 1024 particles
O 2.5 x 1024 particles
Answers
Answer:
The molar mass of N
2
is 28 g/mol.
56 grams of N
2
=
28g/mol
56g
=2moles
At STP, 1 mole of any gas occupies a volume of 22.4 L.
2 moles of N
2
at STP will occupy a volume of 2×22.4=44.8L
Q. An ingestion tablet contains a mass of 0.30 g of hydroxide [Mg(OH)2] as its only basic ingre magnesium dient. The balanced chemical equation between magnesium and hydrochloric acid (HCl(aq)), the acid produced in the stomach is as follows:
Mg(OH)2(aq) + 2HCl(aq) ⟶ MgCl2(aq) + 2H2O(l)
(i) Calculate the volume of 1.00 M HCl neutralised by two of these ingestion tablets?
(ii) What mass of the salt is formed in this neutralisation reaction?
(iii) How many magnesium ions are present in this amount of a salt?
Answers
(i) The volume of 1.00 M HCl neutralized by two of these ingestion tablets is 20.6 mL
(ii) The mass of salt formed in the neutralization reaction is 0.98 g
(iii) The number of magnesium ions present in that amount of salt is 6.19 × 10²¹ ions
Stoichiometry(i) From the question, we are to calculate the volume of 1.00 M HCl neutralized two of the ingestion tablets
From the given balanced chemical equation
Mg(OH)₂(aq) + 2HCl(aq) ⟶ MgCl₂(aq) + 2H₂O(l)
This means,
1 mole of Mg(OH)₂ is neutralized by 2 moles of HCl to give 1 mole of MgCl₂
Now, we will determine the number of moles of Mg(OH)₂ present in two of the ingestion tablets
From the given information
Mass of Mg(OH)₂ in 1 ingestion tablet = 0.30 g
∴ Mass of Mg(OH)₂ in 2 ingestion tablets = 0.60 g
Using the formula,
[tex]Number\ of\ moles = \frac{Mass}{Molar\ mass}[/tex]
Molar mass of Mg(OH)₂ = 58.33 g/mol
Then,
Number of moles of Mg(OH)₂ in 2 ingestion tablets = [tex]\frac{0.60}{58.33}[/tex]
Number of moles of Mg(OH)₂ in 2 ingestion tablets = 0.0102863 mole
Now,
If 1 mole of Mg(OH)₂ is neutralized by 2 moles of HCl
Then,
0.0102863 mole of Mg(OH)₂ will be neutralized by 0.0205726 moles of HCl
∴ The number of moles of HCl that would neutralize 2 ingestion tablets is 0.0205726 mole
Now, for the volume of 1.00 M HCl neutralized by two ingestion tablets
Using the formula,
[tex]Volume = \frac{Number\ of\ moles}{Concentration}[/tex]
Volume = [tex]\frac{0.0205726}{1.00}[/tex]
Volume = 0.0205726 L
Volume = 20.5726 mL
Volume ≅ 20.6 mL
Hence, the volume of 1.00 M HCl neutralized by two of these ingestion tablets is 20.6 mL
(ii) For the mass of salt (MgCl₂) formed in the neutralization reaction
Since 1 mole of Mg(OH)₂ is neutralized by 2 moles of HCl to give 1 mole of MgCl₂
Then,
0.0102863 mole of Mg(OH)₂ will be neutralized by 0.0205726 moles of HCl to give 0.0102863 mole of MgCl₂
∴ The number of moles of the salt (MgCl₂) formed is 0.0102863 mole
For the mass of the salt formed,
Using the formula,
Mass = Number of moles × Molar mass
Molar mass of MgCl₂ = 95.211 g/mol
∴ Mass = 0.0102863 × 95.211
Mass = 0.9793689 g
Mass ≅ 0.98 g
Hence, the mass of salt formed in the neutralization reaction is 0.98 g
(iii) For the number of magnesium ions present in that amount of salt,
1 mole of MgCl₂ contains 1 mole of magnesium ions
Then,
0.0102863 mole of MgCl₂ will contain 0.0102863 mole of magnesium ions
From the formula,
Number of ions = Number of moles × Avogadro's constant
Avogadro's constant = 6.022 × 10²³ mol⁻¹
∴ Number of magnesium ions present = 0.0102863 × 6.022 × 10²³
Number of magnesium ions present = 0.061944 × 10²³
Number of magnesium ions present = 6.1944 × 10²¹
Number of magnesium ions present ≅ 6.19 × 10²¹ ions
Hence, the number of magnesium ions present in that amount of salt is 6.19 × 10²¹ ions
Learn more on Stoichiometry here: https://brainly.com/question/6061451
Solve 9 × 5 8 what is the anser
Answers
Answer:
522
Explanation:
9 time 8 is 72, 7 carryover on 5 and 9 times 5 is 45 plus 7 carry over which is equal to 52. Therefore answer becomes 522.
How many moles are in 34.51 L of C*O_{2} assuming the gas is at STP
Answers
Which is defined as the energy required to remove an electron from an atom of an element?
A electronegativity
B ionization energy
C ionic radius
D law of octaves
Answers
How many grams of H2O are produced when 5.38g of O2 is reacted?
Answers
Answer:
2.33 g H20
Explanation:
12.1 grams of water are produced when 5.38g of O₂ is reacted.
What is Mole?The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter.
A mole is defined as the amount of substance containing the same number of atoms, molecules, ions, etc. as the number of atoms in a sample of pure 12C weighing exactly 12 g.
Given,
Mass of oxygen = 5.38g
Moles = mass / molar mass
Moles of oxygen = 5.38 / 16
= 0.34 moles
From the reaction, 2H₂ + O₂ = 2 H₂O
1 mole of oxygen gives 2 moles of water.
Thus, 0.34 moles of oxygen will give 2 × 0.34 moles
= 0.67 moles of water.
Mass of water = moles × molar mass
= 0.67 × 18
= 12.1 g of water
Therefore, 12.1 grams of water are produced when 5.38g of O₂ is reacted.
Learn more about Moles, here:
https://brainly.com/question/20486415
#SPJ3
How many moles in 109.6 g of Cl₂?
Answers
Answer:
1 grams Cl2 is equal to 0.014103178856514 mole.
Explanation:
Hope This Helps
Have A Great Day
Pure magnesium metal is often found as ribbons and can easily burn in the presence of oxygen. When 3.28 g of magnesium ribbon burns with 7.25 g of oxygen, a bright, white light and a white, powdery product are formed. Enter the balanced chemical equation for this reaction. Be sure to include all physical states. equation: What is the limiting reactant? magnesium oxygen The reaction goes to completion, but in the process of recovering the product, some of it was lost. The the percent yield for the reaction is 83.7%. How many grams of product are recovered? mass of product recovered: g How many grams of the excess reactant remain? Assume the reaction goes to completion. mass of excess reactant: g
Answers
Answer:
2 Mg(s) + O2(g)→ 2 MgO(s)
Explanation:
Number of moles of magnesium reacted = mass/ molar mass = 3.28g/24gmol-1 = 0.137 moles
From the balanced reaction equation;
2 moles of Mg yields 2 moles of MgO
0.137 moles of Mg yields 0.137 moles of MgO
For oxygen;
Number of moles of oxygen reacted = mass/ molar mass = 7.5g/32gmol-1 = 0.234 moles of O2
If 2_moles of oxygen yields 2 moles of MgO
0.234 moles of oxygen yields 0.234 moles of MgO
Hence Mg is the limiting reactant
Theoretical yield of MgO = 0.137 moles × 40 gmol-1 = 5.48 g of MgO
% yield of MgO = 83.7%
But
% yield = actual yield/theoretical yield × 100
actual yield = % yield × theoretical yield / 100
actual yield= 83.7 × 5.48/100
Actual yield = 4.59 g
According to the equation;
2 moles of Mg reacts with 2 moles of oxygen
Hence 0.137 moles of Mg will react with 0.137 moles of O2
Amount of excess reactant = 0.234 moles - 0.137 moles = 0.097 moles
Mass of excess reactant = 0.097 moles × 32gmol-1 = 3.1g of O2
A ball of mass 0.3 kg is released from rest at a height of 8 m. How fast is it going when it hits the ground? Acceleration due to gravity is g = 9.8 m/s2.
Group of answer choices
2.4 m/s
8.2 m/s
12.5 m/s
13.1 m/s
Answers
Answer:
C. 12.5 m/s
Explanation:
h = h(0) - gt²/2
0 m = 8 m - 9.8 m/s²*t²/2
- 8 m = - 9.8 m/s²*t²/2
16 m = 9.8 m/s² * t²
t² = 16/9.8 s²
t = √(16/9.8) s
v = v(0) + gt
v = 0 +gt
v = 9.8 m/s² * √(16/9.8) s ≈ 12.5 m/s
Your friend challenged you to a race you know in order to beat him you must run 15 meters within 20 seconds in the northern direction what does your average velocity need to be to win the race
.5 meters per second north
.75meters per second north
1.3meters per second north
300 meters per second north
Answers
Answer:
.75 meter north
Explanation:
v = d/t
v = 15/20
v = .75
What variable is assumed to be constant whrn using the combined gas law
Answers
Explanation:
the formula of combined gas law = PV/T
:• PV/T = K
K is constant
How do this I’m in school really don’t know what to do
Answers
Answer:
you gotta rotate it 90 degrees and get that screen fixed
Explanation:
write the reaction for ferric hydroxide dissolving in NaOH. hint combine the two equilibrium reaction
Answers
The properly balanced chemical equation for this chemical reaction is written as follows:
[tex]FeCl_{3}(aq)+3Na0H(aq) \rightleftharpoons Fe(OH)_3(s)+3NaCl(aq)[/tex]
What is a chemical reaction?A chemical reaction can be defined as a chemical process that involves the continuous transformation (rearrangement) of the ionic, atomic or molecular structure of a chemical element by breaking down and forming chemical bonds, in order to produce a new chemical compound while new bonds are formed.
The chemical reaction of aqueous ferric hydroxide that is dissolved in aqueous sodium hydroxide produces ferric hydroxide and aqueous sodium chloride. Thus, the properly balanced chemical equation for this chemical reaction is written as follows:
[tex]FeCl_{3}(aq)+3Na0H(aq) \rightleftharpoons Fe(OH)_3(s)+3NaCl(aq)[/tex]
Read more on chemical reaction here: brainly.com/question/13750908
The nutrition label tells us that 13 g of a serving of gummy bears (i.e. 10 gummy bears) is made of sugars. Let's assume that all of the sugar is sucrose. The balanced reaction for the combustion of sucrose is given below. How much heat is released from the combustion of the sucrose in a single gummy bear?
2C12H22O11+24O2→24CO2+22H2O ΔHrxn=−11,286kJ
Answers
This problem is providing the mass of gummy bears which are assumed to contain 13 g of sucrose, which undergoes combustion and produces -214.3kJ of heat according to the following:
Heat of reactionIn chemistry, when a fuel undergoes combustion, a reaction with oxygen, it produces carbon dioxide and water in a complete combustion. In such a way, with the given reaction, we can write the heat of reaction as -11,286 kJ per mole of reaction:
[tex]\Delta H=-11,286\frac{kJ}{mol\ rxn}[/tex]
Which means that if we need the total heat released by 13 g of sucrose, one must apply the following dimensional analysis including this fuel's molar mass (342.3 g/mol):
[tex]Q=-11,286\frac{kJ}{mol\ rxn}*\frac{1mol\ rxn}{2molC_1_2H_2_2O_1_1}*13gC_1_2H_2_2O_1_1 *\frac{1molC_1_2H_2_2O_1_1}{342.3gC_1_2H_2_2O_1_1} \\\\Q=-214.3kJ[/tex]
Learn more about heat of reaction: https://brainly.com/question/8055290
In photosynthesis, carbon dioxide (CO2) and water (H20) combine to form the sugar glucose (C6H1206) in the following reaction:
6CO2 + 6H20 - CH1206+?
Assuming this equation is balanced, which part is missing from the product side?
-12 hydrogen atoms
-06 carbon atoms
-6 oxygen atoms
-12 oxygen atoms
Answers
The part that is missing from the product side = 6 oxygen atoms.
The equation of photosynthesisPhotosynthesis is the process by which green plants traps in energy from the sun, through their chlorophyll, which they use in the manufacture of sugar with oxygen as a by-product.
The balanced equation of photosynthesis;
6CO2 + 6H2O + (energy) → C6H12O6 + 6O2
From the equation given,
6CO2 + 6H20 - CH1206+?
The missing part of the product = 6O2 (-6 oxygen atoms)
Learn more about photosynthesis here:
https://brainly.com/question/19160081
predict the block, period and group of (Z:12)
Answers
Explanation:
Atomic number = 12
Block = s-block
Period = 3rd
Group = 2nd
Based on the information in the table which two elements are most likely in the same groans why
Answers
Estimate the molar concentration of 0.50 wt% (0.0050 mass fraction) benzene (C6H6) dissolved in liquid ethanol (C2H5OH) at 20°C. The density of liquid ethanol is 789 kg/m3 at 20°C. This solution of the solute benzene dissolved in the solvent ethanol is considered dilute.
Answers
The molar concentration of benzene is 0.05mol/L
Data;
Mass Fraction = 0.0050Temperature = 20°CDensity of Ethanol = 789 kg/m^3 Molar Concentration of Benzenemolar mass of benzene = 78g/mol
molar mass of ethanol = 46g/mol
mole fraction of benzene is
[tex]mole fraction = \frac{moles of benzene}{total mole}[/tex]
Let's substitute the values and find the mole fraction of benzene
[tex]_yC_6H_6 = \frac{\frac{0.005}{78} }{(\frac{0.005}{78})+ (\frac{1-0.005}{46}) }\\ _yC_6H_6 = 0.00295[/tex]
The density of benzene given is 789 kg/m^3
Molar concentration of the solution is
[tex]M = \frac{789}{0.046} = 17.15Kmol/m^3[/tex]
The concentration of benzene is the product of mole fraction and the molar concentration of the solution
[tex]M = 0.00295 * 17.152 = 0.05Kmol/m^3= 0.05mol/L[/tex]
The molar concentration of benzene is 0.05mol/L
Learn more on molar concentration here;
https://brainly.com/question/15900508