Of the four gases co2, h2o, n2, and o2, which are greenhouse gases?.

Answers

Answer 1

Answer:

h20, 02, and c02

Explanation:


Related Questions

What do each of the' rings represent in the Bohr models?

Answers

Answer:

The energy levels or electron shells of an atom.

Answer:

Each ring represents a different energy level for the electrons. Each ring has a maximum number of electrons that it can hold. The first (inner) ring can only hold two electrons, the second level can hold eight, the third can hold 18 and the fourth holds 32.

Hope this helps :)

True or false: For a spontaneous redox reaction, the products are stronger oxidizing and reducing agents than the reactants.

Answers

Answer: False

Explanation: The stronger oxidizing agent, and stronger reducing agent are the reactants.

The given statement is false , for a spontaneous redox reaction, the reactants are stronger oxidizing and reducing agents than the products.

What are redox reactions?

Redox reactions comprise of two parts a reduced part and an oxidized part, which occur simultaneously . The part which is reduced gain electrons and hence there is a increase in oxidation state of the species.

While, the part which is oxidized looses electrons and hence there is a decrease in oxidation state of the species.During redox reactions, there is no net change in the number of electrons . Electrons which are given off in oxidation are used up in reduction.

The ion or molecule which accepts electrons is called as oxidizing agent while the ion or molecule which donates electrons is called as a reducing agent.

Learn more about redox reactions,here:

https://brainly.com/question/13293425

#SPJ5

3 sentances
Heat can be lost from the body in the same way that heat is lost from Earth's surface. Based on what you know about heat transfer from Earth's surface to the atmosphere, describe how the body can lose heat in each of these ways (radiation, conduction, convection).

Answers

Answer:

the body can losse heat through Radiation,since Radiation does not involve the direct contact of two mediums

Why do elements in the same group have similar physical and chemical properties

Answers

Answer:

Each element within a group has similar physical or chemical properties because of its atom's outermost electron shell (most chemical properties are dominated by the orbital location of the outermost electron).

Explanation:

Joe the scientist wants to figure out if the weight of a bowling ball will affect how fast it rolls down a ramp. Joe builds a 15 foot long ramp that is 5 feet tall at the top. Joe believes that if he rolls the 6 pound bowling ball from the top of the ramp, then it will roll the fastest. Joe then gets several bowling balls that are identical except for their weight. The different weights are 6 pounds, 8 pounds, 10 pounds, 12 pounds, and 14 pounds. Joe starts by placing the 6 pound ball at the top of the ramp and he starts the timer at the same time he lets go. He stops the timer when the ball reaches the bottom of the ramp. Joe repeats this process for all of the bowling balls. Joe repeats this process for all of the bowling balls.

What’s the IV, DV, hypothesis and constant ?

Answers

Answer:

IV: The weight of the ball

DV: Time it takes for the ball to roll from top to bottom

Hypothesis:  6 pound bowling ball from the top of the ramp, then it will roll the fastest.

Constant: I dont know

Explanation:

After a few minutes of boiling, Francisco removes the pressure cooker from the heat and lets it sit for 15 minutes. How will this affect the particles in the water vapor inside the cooker?
Choose the correct answer.


They will collide with each other more often.

They will collide with the walls of the pressure cooker more often.

They will collide with the walls of the pressure cooker less often.

They will begin to collide with air particles rather than the liquid water particles.

Answers

Answer:

Pressure Cooking

Explanation:

Pressure cooking is a very old cooking method that’s experienced a recent resurgence thanks to a new generation of cookers that promise a speedy, set-it-and-forget-it path to dinner. These devices, whether electrical or stovetop, are all much safer than those of decades ago (which tended to explode), with mechanisms to prevent them from accumulating too much pressure. If you read the owner’s manual carefully, however, you’ll still find one important precaution to take when cooking under pressure: adding water. Water and pressure cooking go hand in hand. In fact, it’s water that helps generate the high-pressure environment that makes your food cook faster.

Most pressure cooker instructions state a minimum amount of water required for pressure cooking even a tiny amount of food. Inside the tightly sealed pressure cooker, the water is heated and eventually boils into steam. Since the steam cannot escape, it collects above the food. All those trapped water molecules increase the pressure inside the cooker.

Lab: Ionic and Covalent Bonds Click the links to open the resources below. These resources will help you complete the assignment. Once you have created your file(s) and are ready to upload your assignment, click the Add Files button below and select each file from your desktop or network folder. Upload each file separately.

PLEASE HELP ME

Answers

Explanation:

Here you go, my teacher hasnt graded it yet.

14 In which group are all the elements found
naturally only in compounds?
(1). 18
(3) 11
(2) 2
(4) 14

Answers

your answer is 2 hope this helped

How many moles of hydrogen atoms are found in 1.50 • 10{24} molecules of C12 H22 O11

Answers

1.5x10^24 over 1 multiplied by 1 mol over 342g C12H22O11 multiplied by 6.02x10^23 over 1 mol

Multiply all across the top then divide by bottom

2.64 Mol

i need help on this plsss

Answers

Answer:

Ionic Compound

Explanation:

1) NaBr

2) CaCl2

3) MgS

4) AlO

5) Li3P

6) Cs3N

7) KI

8) BaF2

9) RbNO2

10) BaO

11) Potassium oxide

12) Magnesium iodide

13) Aluminum chloride

14) Calcium bromide

15) Sodium nitride

16) Lithium fluoride

17) Barium phosphide

18) Dicesium sulfide

19) Strontium fluoride

20) Sodium chloride

Hope this helps!!

22) Calculate the energy of a photon of radiation with a frequency of 9.50 x 1013 Hz.

Answers

The energy of the photon with a frequency of 9.50×10¹³ Hz is 6.29×10¯²⁰ J

From the question given above, the following data were obtained:

Frequency (f) = 9.50×10¹³ Hz

Planck's constant (h) = 6.626×10¯³⁴ Js

Energy (E) =?

The energy of the photon can be obtained as follow:

E = hf

E = 6.626×10¯³⁴ × 9.50×10¹³

E = 6.29×10¯²⁰ J

Therefore, the energy of the photon is 6.29×10¯²⁰ J

Learn more: https://brainly.com/question/7957705

Can someone help me with my science it’s super hard :(

Answers

Answer: here is a description of what they look like since I cannot see the diagram.

Mitochondria- wavy line

Ribosomes- little dots

Chromosome- X

Nucleus- Circle with bite taken out of it

Endoplasm- Bubble

Nuclear membrane- Outer layer/bubble

Golgi-wavy circle thing

Vacuole- Bigger circle (but not nucleus)

Cytoplasm- its the jelly on the inside

Cell wall- only in plant cells, looks like a box

Cell membrane- The outmost part of the animal cell, the barrier.

I sure hope this helps!!!

Which ground-state atom has an electron configuration described by the following orbital diagram?.

Answers

Answer:

The energy of atomic orbitals increases as the principal quantum number, n, increases. In any atom with two or more electrons, the repulsion between the electrons makes energies of subshells with different values of I differ so that the energy of the orbitals increases within a shell in the order s< p <d<f. Figure 1 depicts how these two trends in increasing energy relate. The 1s orbital at the bottom of the diagram is the orbital with electrons of lowest energy. The energy increases as we move up to the 2s and then 2p, 3s, and 3p orbitals, showing that the increasing n value has more influence on energy than the increasing I value for small atoms. However, this pattern does not hold for larger atoms. The 3d orbital is higher in energy than the 4s orbital. Such overlaps continue to occur frequently as we move up the chart.

What is a quick way to determine how many energy levels an element possesses?
A.
Divide the element's atomic number by eight.
B.
Find the element's group number on the periodic table.
C.
Find the element's period number on the periodic table.
D.
Divide the element's atomic mass by eight.

Answers

Answer:

c

Explanation:

just got this question

Which product in the reaction forms a precipitate? PbSO4 MgCl2 PbMg no precipitate formed

Answers

MgCl2 product in the reaction forms a precipitate because it is solid an insoluble salt and not dissolve in solution and precipitate on the bottom surface of the solution.

What is precipitation reaction?

The chemical reaction in which two ionic bond combine to form an insoluble salt in a aqueous solution is called precipitation reaction.

To learn more about precipitation reaction here.

https://brainly.com/question/24158764

#SPJ2

If 77.0 mL of nitrogen gas is collected over water at 50 °C and 763 mm Hg, what is the volume of dry nitrogen gas at STP? The vapor pressure of water at 50 °C is 92.5mm Hg.

Answers

The volume of the dry nitrogen gas at STP is 57.4 mL

From the question given above, the following data were obtained:

Initial volume (V₁) = 77 mL

Initial temperature (T₁) = 50 °C = 50 + 273 = 323 K

Initial pressure (P₁) = 763 – 92.5 = 670.5 mmHg

Final temperature (T₂) = STP = 273 K

Final pressure (P₂) = 760 mmHg

Final volume (V₂) =?

The volume of the dry nitrogen can be obtained by using the combine gas equation as follow:

[tex] \frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2} \\ \\ \frac{670.5 \times 77}{323} = \frac{760 \times V_2}{273} \\ \\ cross \: multiply \\ \\ 323 \times 760 \times V_2 = 670.5 \times 77 \times 273 \\ \\ divide \: both \: side \: by \: 323 \times 760 \\ \\ V_2 = \: \frac{670.5 \times 77 \times 273 }{323 \times 760} \\ \\ V_2 = 57.4 \: ml[/tex]

Therefore, the volume of the dry nitrogen gas is 57.4 mL

Learn more: https://brainly.com/question/25080013

A sample of uranium absorbs 27.16 kJ of energy and changes temperature by 347.6 C. If 27.17 J/(1C * 1 mole) for uranium, the how many mole of U are in the sample?

Answers

Answer:

Q = 2.877 mole (4 sig. figs.)

Explanation:

Using Q = m·c·ΔT => m = Q/c·ΔT

Q = 27.16 Kj

c = 27.17 j/g·°C = 0.02717 Kj/g·°C

ΔT = 347.6 °C  

Q = 27.16 Kj/(0.02417j/mol·°C)(347.6°C) = 2.87.6869965 mol (calc. ans.)

= 2.877 mole (4 sig. figs.)

diagram 1 above shows equimolar samples of two gases inside a container fitted with a removable barrier placed so that each gas occupies the same volume. the barrier is carefully removed as the temperature is held constant. diagram 2 above shows the gases soon after the barrier is removed. which statement describes the changes to the initial pressure of each gas and the final partial pressure of each gas in the mixture and also indicates the final total pressure?

Answers

This problem is describing the state two gases have when separated and together as shown on the attached picture. First of all, diagram 1 shows how they are separated in two containers with apparently equal volumes, whereas diagram 2 shows the removal of the barrier so that they get mixed together.

In this case, we can analyze that each gas has its own pressure and due to the removal of the barrier, both pressure and volume undergo a change. Thus, we can infer that the final volume is doubled with respected to the initial one for each gas, causing the pressure of each gas to be halved and the total pressure the half of the added ones, in agreement to the Boyle's law (inversely proportional relationship between pressure and temperature).

Therefore, the correct choice is:

C. The partial pressure of each gas in the mixture is half its initial pressure; the final total pressure is half the sum of the initial pressures of the two gases.

Learn more:

https://brainly.com/question/21184611

Electrical Bonding and Kinetic Energy Quick Check


2. Which statement describes the effect of adding more energy to a system, assuming a phase change does not occur?(1 point)

A. The particles within the system will have greater motion, and the temperature will decrease.

B. The particles within the system will have less motion, and the temperature will increase.

C. The particles within the system will have less motion, and the temperature will decrease.

D. The particles within the system will have greater motion, and the temperature will increase



3. Which statement correctly describes how attractions that hold particles break?(1 point)

A. Attractions occur due to gravitational forces. When particles have low enough energy, these forces can no longer keep particles together.

B. Attractions occur due to electrostatic forces. When particles have low enough energy, these forces can no longer keep particles together.

C. Attractions occur due to electrostatic forces. When particles move fast enough, these forces can no longer keep particles together.

D. Attractions occur due to gravitational forces. When particles move fast enough, these forces can no longer keep particles together.

4. Which statement explains why a rubber band analogy is not a perfect comparison for bonds in a substance when considering phase changes?(1 point)

A. For a phase change from solid to liquid, the bonds break completely and particles can move independently of each other.

B. For a phase change from solid to liquid, the bonds do not break completely and particles can still slide past each other.

C. For a phase change from liquid to gas, the bonds do not break completely and particles can still slide past each other.

D. For a phase change from liquid to gas, the bonds break completely and particles can move independently of each other.

5. The boiling point of benzene is 80ºC. Which pair of samples will have the same average kinetic energy as benzene molecules?(1 point)

A. a sample of liquid benzene at 70ºC and a sample of gaseous benzene at 90ºC

B. two samples of liquid benzene, one at 70ºC and the other at 80ºC

C. two samples of gaseous benzene, one at 80ºC and the other at 90ºC

D. a sample of liquid benzene at 80ºC and a sample of gaseous benzene at 80ºC

Answers

When particles move fast enough, these forces can no longer keep particles together.

Recall that the particles of a substance are in constant random motion. Hence, when more energy is added to the system, the particles within the system will have greater motion, and the temperature will increase.

The forces that keep molecules together in a particular state of matter are electrostatic forces. When particles move fast enough, these forces can no longer keep particles together.

It is common to use the analogy of an elastic material to represent the bonding between atoms in molecules. However, this analogy is not apt in a phase change because, for a phase change from liquid to gas, the bonds break completely and particles can move independently of each other.

We know that the average kinetic energy of the molecules of a substance depends on the temperature of the body. Therefore, a sample of liquid benzene at 80ºC and a sample of gaseous benzene at 80ºC will have the same average kinetic energy as benzene molecules.

Learn more: https://brainly.com/question/6284546

explain why boiling is a reversible change​

Answers

Answer:

This is a reversible change. Similarly, if you boil water, it evaporates and becomes water vapor. When you cool this vapor down, it turns back to water. A change which cannot happen backward, that is, it cannot be reversed is called an irreversible change.

Explanation:

When we boil water by heating, then it changes into steam. Now, if we cool the steam, then water is formed again. So, the changing of water into steam has been reversed by cooling. Thus, the boiling of water (or evaporation of water) is a reversible change.

When you bend, stretch, or compress an object from its natural shape, it stores

Question 3 options:

Gravitational potential energy


Kinetic energy


Chemical energy


Elastic potential energy

Answers

Answer: The answer is elastic potential energy

Explanation: Potential energy is stored energy if something is elastic that means the shape or form of an object is being compressed from its original form. Like elastic girl from the incredibles lol. but anyways if you compare somehting to a rubber band it has elastic potential energy Thus the answer is D.

Hope this helps :).

When you bend, stretch, or compress an object from its natural shape, it stores Elastic potential energy.

What is elastic potential energy ?

Elastic energy is the mechanical potential energy held in a material's or a physical system's configuration as it is subjected to elastic deformation as a result of work being done on it. Elastic energy is created when objects are momentarily crushed, stretched, or otherwise deformed.

Because it is stored in the bonds between atoms of an object or substance when it is momentarily stressed, elastic energy is a type of potential energy. The object may have been stretched or compressed, causing this stress.

An object's shape may change as a result of a force operating on it. If stretched or compressed, elastic things can store elastic potential energy. This occurs, for instance, when a spring is stretched or a catapult is utilized.

Thus, option D is correct.

To learn more about elastic potential energy, follow the link;

https://brainly.com/question/14687790

#SPJ2

Why are you more likely to become dehydrated in hot weather?

Answers

Answer:

sweat

Explanation:

you get dehydrated in hot weather because your body will release sweat to try and keep you cool

Answer:

Well, the heat can sometimes be very subtle in how it affects the body. If you're out in the sun, it can take just 30 minutes or up to a few hours for the heat to cause dehydration, nausea or it could cause trouble concentrating. When it's hot and humid, your risk of dehydration and heat illness increases. That's because when the air is humid, sweat can't evaporate and cool you as quickly as it normally does, and this can lead to an increased body temperature and the need for more fluids.

I HOPE DAT THIS HELPS :)

Explanation:

PLS HELP: Endocrine Organs Crossword

Answers

the answer to 4 down is Adrenal

How many atoms are in 2.05 g of Na?
How many grams are in 4.5 x 1025 atoms of P?

Answers

THIS IS UR ANSWERPLS MARK ME AS BRAINLIEST..

Most elements are ____________. The _____________ elements on the left of the stair-step line on the ______________ of Elements are metals or metal-like _____________. Some of the physical properties of metals are ______________ (shininess) and ___________ density. They are also good conductors of ___________ and ______________. Metals can be hammered into __________sheets.

Answers

Answer:

metals, 88 , periodic table , luster , heat, electricity , thin, right, opposite , appearance , luster  , malleable , ductile, opposite , shiny, moderately

Explanation:

metals, 88 , periodic table , luster , heat, electricity , thin, right, opposite , appearance , luster  , malleable , ductile, opposite , shiny, moderately Is the answer.

(Hope this helps can I pls have brainlist (crown)☺️)

Cell types a classification

Answers

Answer:

It is possible to divide cells into two classifications: eukaryotic cells, which have a nucleus, and prokaryotic cells, which do not possess a nucleus but do contain a nucleoid area. In contrast to prokaryotes, which are one-celled creatures, eukaryotes may be either single-celled or multicellular in nature.

Explanation:

Hope it helps:)

Which of the following the parts of the cell is made up of lipoprotein? A)ribosomes B)plasma memeberanes C)cell wall D)DNA​

Answers

Answer: the answer is plasma membrane

Explanation:

Plasma membrane is made up of lipoproteins. There are two layers of lipids and the protein molecules are embedded in it. It is present in both plant cell and animal cell. The membrane is selectively permeable i.e., it allows only certain substances to pass.

The parts of the cell is made up of lipoprotein is Plasma Membrane. So, the correct option is (B).

What is Plasma Membrane?

The plasma membrane is made up of lipoproteins. There are two layers of lipids and protein molecules are embedded in it. It is present in both plant cell and animal cell. The membrane is selectively permeable i.e. it allows only certain substances to pass through.

The plasma membrane is also called the cell membrane which is a biological membrane that separates and protects the interior of all cells from the external environment. The plasma membrane controls the transport of materials entering and exiting the cell.

It provides a definite environment inside the cell. It also has many different functions such as transporting nutrients into the cell and removing toxins from the cell. The second is that the membrane of the cell, which would be the plasma membrane, would contain proteins that interact with other cells.

Thus, the parts of the cell is made up of lipoprotein is Plasma Membrane. So, the correct option is (B).

Learn more about Plasma Membrane, here:

https://brainly.com/question/14727404

#SPJ2

What part of the digestive tract that the food is broken into very small pieces?​

Answers

The stomach muscles

mix the food with digestive juices that have acids and enzymes, breaking it into much smaller, digestible pieces

hope it helps

Which statement accurately compares these flashlights?

A. The smaller flashlight has more inertia than the larger flashlight,
so it takes less force to change the motion of the smaller
flashlight

B. The smaller flashlight has less inertia than the larger flashlight, so
it takes more force to change the motion of the smaller flashlight.

C. The smaller flashlight has less inertia than the larger flashlight, so
it takes less force to change the motion of the smaller flashlight.

D. The smaller flashlight has more inertia than the larger flashlight,
so it takes more force to change the motion of the smaller
flashlight

Answers

The small flashlight has less inertia and smaller force is required to move it.

According to Newton's first law of motion, an object will continue at rest or in its state of uniform motion unless it is acted upon by an external unbalanced force. This is also called the law of inertia.

The quantity of mass contained in a body is a measure of its inertia. The greater the mass of the body, the greater the inertia and the greater the force required to move the body.

The smaller flashlight has less inertia than the larger flashlight, so  it takes less force to change the motion of the smaller flashlight.

Learn more about Newton's law : https://brainly.com/question/13678295

How did the scientists create atoms of element 115

Answers

Answer:

With ions of calcium in a cyclotron. This produced four atoms of moscovium. Moscovium is a synthetic element with the symbol Mc and atomic number 115. It was first synthesized in 2003 by a joint team of Russian and American scientists at the Joint Institute for Nuclear Research (JINR) in Dubna, Russia. In December 2015, it was recognized as one of four new elements by the Joint Working Party of international scientific bodies IUPAC and IUPAP. On 28 November 2016, it was officially named after the Moscow Oblast, in which the JINR is situated.[7][8][9]

Moscovium is an extremely radioactive element: its most stable known isotope, moscovium-290, has a half-life of only 0.65 seconds.[10] In the periodic table, it is a p-block transactinide element. It is a member of the 7th period and is placed in group 15 as the heaviest pnictogen, although it has not been confirmed to behave as a heavier homologue of the pnictogen bismuth. Moscovium is calculated to have some properties similar to its lighter homologues, nitrogen, phosphorus, arsenic, antimony, and bismuth, and to be a post-transition metal, although it should also show several major differences from them. In particular, moscovium should also have significant similarities to thallium, as both have one rather loosely bound electron outside a quasi-closed shell. Over a hundred atoms of moscovium have been observed to date, all of which have been shown to have mass numbers from 286 to 290.

Explanation:

Hope this helps u please make brainlyest

Using calcium ions in a cyclotron. As a result, four moscovium atoms were created. Moscovium is a man-made element with the atomic number 115 and the symbol Mc

Where was the element 115 created for first time ?

Heavy ion collisions in particle accelerators have intentionally produced element 115, also known as Moscovium. So far, about 100 atoms have been seen.

At the Joint Institute for Nuclear Research (JINR) in Dubna, Russia, a team of Russian and American scientists initially created it in 2003.

It was acknowledged as one of four new elements by the Joint Working Party of the worldwide scientific organisations IUPAC and IUPAP in December 2015. It was formally named after the Moscow Oblast on November 28, 2016.

Thus, Element 115 i.e. moscovium was created using calcium ion of cyclotron.

To learn more about element 115 follow the link below;

https://brainly.com/question/14679547

#SPJ2

Other Questions
Identify and describe four factors that will cause a demand curve for gasoline to shift to the left or decline. What will the likely effect on prices 3/8 + 1/8 + 2/3 - 1/2 = a commuter railway has 800 passengers per day and charges each one two dollars per day. for each 1 cents that the fare is increased, 5 fewer people will go by train. what is the greatest profit that can be earned? ytvmzeoyhuThe Big Questions: What is life? Lesson 1: Living Things Themes DRY MOUNT SPECIMEN PREPARATION Task # Direction: Study the procedures in column A and B. poste your accomplished improvise specimen Procedure How does it look like Your Tasks Yo work Prepare a slide, most microscope slides are flat on Cut the cardboard into 1 top and bottom and inch width and 3 inches in rectangular in shape. It is height. This will serve as transparent that allows the light pass on your slide Slice off a thin piece of the sample specimen. Use a razor blade to cut your specimen material into a thin, translucent slice In a colored paper cut a portion of it of l cm by 1 cm. In order to make a sample specimen Place the strip colored paper over the cardboard Place the sample specimen on the slide. Use a pair of forceps to pick up the thin slice of your sample specimen Set a cover slip over the mple specimen. The cover lip prevents the sample cimen from tumbling off the slide Using the transparent plastic, cover the sample. The plastic cover will serve as the cover slip of the sample What is the product? (Y^2+3Y+7)(8y^2+y+1 Pleeeeasee someone whos good at chemistry?! 10 grade ASAPIll give points, just help please Which of the following states of matter is made of free electrons and ions of the elements? A. liquid B. gas C. solid D. plasma PLS help me!!!!Finding the EpicenterFind the length of the radius of each circle. To calculate the radius, divide the distance from the epicenter by 640 km. Write as a fraction 3151 I need help with the question 10. It is important to remember allegories are not literal, theyrepresentative.*O YesO No ASAP! Assignment Goal: Describe the motion of a rocket using a quadratic model.Instructions: Respond to each of the questions. Your solutions must document all of your work.Scenario: A toy rocket is launched straight upward from a pad 10 ft above ground level with an initial velocity of 80 ft/sec. Use the general formula for the vertical position (height) of an object moving under the influence of gravity s=-1/2 gt^2+ v_0 t+ s_0 where s0 is initial vertical position, v0 is initial velocity, and s is vertical position of the object.1. Define a model (equation) to express the vertical position (height) of the rocket s (in meters) above ground level t seconds after launch. Let g = 32 ft/sec2. Stress can feel like pressure in your body that doesnt seem to go away, and it can be triggered by social life, studies, family issues, or troubling everyday problems.A. TrueB. False Two books, a pen, and a spiral notebook _____ found in the briefcase.(was,were) Multiply 3 by 25% of 40. What does the following quote by George Eliot mean: "What do we live for if it is not to make life less difficult to each other?" Compare and contrast biblical creationists and evolutionists worldviews. is this statement true or false?In most states, the law provides that all employers must give time off to employees to votetruefalse Find the number that makes the ratio equivalent to 1:8.9: