Please answer the question in the picture, worth 25 points

I will report any links or false answers immediately

Based on the flow of energy that's in the lake, it can be deduced that the diatoms and algae will have the highest concentration.

Energy flow refers to the flow of energy through living organisms that are within an ecosystem. Energy is passed from one trophic level to the next trophic level.

If the farmer sprays a field with chemical fertilizer, the organism that would contain the highest concentration of the chemical fertilizer are diatoms and algae since they're at the bottom of the ecosystem.

Learn more about energy flow on:

https://brainly.com/question/2116310

Answer:

Skeletal Muscle cells

Skeletal muscle cells are long, cylindrical, and striated. They are multi-nucleated meaning that they have more than one nucleus. This is because they are formed from the fusion of embryonic myoblasts.

Answer:

skeletal muscle cells can have multiple nuclei

Explanation:

This is because they are formed from the fusion of embryonic myoblasts.

Answer:

Agrophobia

Explanation:

an anxiety disorder in which someone feals anxious and scared in a public place

Answer:

The nodes of a standing wave are points where the displacement of the wave is zero at all times nodes are important for matching boundary conditions for example that the point at which a string is tied to a support has zero displacement at all times ie the point of attachment does not move consider a standing

Answer:

1125m

Explanation:

The car moves with a uniformly accelerated motion for 20s:

s = 1/2·a·t² + v0·t + s0 (note that vo = 0 and s0 = 0, with v0 being the initial velocity and s0 the initial displacement).

So: s = 1/2·a·t²

The acceleration will be: Δv/Δt = 15m/s / 20s = 0.75 m/s²

s1 = 1/2·0.75 m/s² · (20 s)^2 = 150m

Then it continues with the velocity he acquired (v = a·t = 0.75 m/s²·20s = 15 m/s):

s2 = vt = 15m/s·50s = 750m

The final acceleration, when stopping, will be:

a = Δv/Δt = -15m/s / 30s = -1/2 m/s²

s3 = 1/2·(1/2m/s²)·(30s)² = 225m.

Now we sum s1 with s2 and s3:

s1 + s2 + s3 = 150m + 225m + 750m = 1125m

Answer:

Explanation:

Assuming the run out at the bottom of the slope is horizontal

μ = Ff/N = Ff/mg

Ff = μmg

a = Ff/m = μmg/m = μg

v = u + at

v = u + μgt

v = 6.55 - 0.088(9.81)(2)

v = 4.82 m/s

After reaching the bottom of the slope, it will take a speed of 4.8m/s to reach. So, the correct option is (C).

Friction is the force which opposes the relative motion of solid surfaces, fluid layers, and material elements that are sliding against each other. There are many types of friction like

Friction can be expressed as

Ff = μFN

where, Ff is the force of friction (N)

μ is the coefficient of friction.

FN is the normal force

As per the above equation, it is actually the normal force, not the weight, which is responsible for friction.

For given information,

Assuming the bottom of the slope is horizontal

So, μ = Ff/N = Ff/mg

Ff = μmg

a = Ff/m = μmg/m = μg

v = u + at (u- initial speed, v= final speed, a= acceleration and t= time)

v = u + μgt (g= acceleration due to gravity)

u = 6.55 - 0.088(9.81)(2)

u = 4.82 m/s

Thus, after reaching the bottom of the slope, it will take a speed of 4.8m/s to reach. So, the correct option is (C).

Learn more about Friction, here:

https://brainly.com/question/13000653

#SPJ2

Answer:D

Explanation:

R =  

V

I

=  

120 volt

0.8 ampere

=  150 ohm (Ω)

P =  V × I

=  120 volt × 0.8 ampere

=  96 watt (W)

An electric light installation  can draw Power of 96 Watt  at 120 V if it creates a current of 0.8 amps

Electric power  is the rate of electric energy transfer by an electric circuit per unit time . It is denoted by P and measured using the SI unit of power that is Watt (W)

since, Electric Power   = voltage * current

Power    = 120 V * 0.8 A

Power    = 96 Watts

An electric light installation  can draw Power of 96 Watt  at 120 V if it creates a current of 0.8 amps

learn more about Electric power  

https://brainly.com/question/16925887?referrer=searchResults

#SPJ3

Answer:

hertz (Hz)

The number of periods or cycles per second is called frequency. The SI unit for frequency is the hertz (Hz).

Answer: the answer is hertz! if you’re on plato it’s option C. have a nice day! :)

Explanation:

Answer:

3. years

Explanation:

The independent variable is the x axis of graph

Answer:

Explanation:

If we ASSUME that a CCW torque is positive

τ = 10sin135[8.0] - 16sin90[4.0] + 19sin160[3.0] = 12 N•m

as the result is positive, the net torque is CCW.

Answer:

net force would be 50 N right

Explanation:

Answer:

Yes , i also need answer

Explanation:

n earthquake emits both P-waves and S-waves that travel at different speeds through the Earth. A P-wave travels at 9 000 m/s and an S-wave at 4 000 m/s. If P-waves are received at a seismic station 34.0 s before an S-wave arrives, how far is the station from the earthquake center

The relationship between variables might be either directly porportional to each other or inversely proportional to each other. For instance, the current flowing is _directly_ proportional to the potential difference across it.

---------------------

Since I do not have the graph, I will propose two potential options and I will describe each of them.

I suggest you to choose the one that matches the shape of graph 3.

The current flowing through this component is __DIRECTLY__ proportional to the potential difference across it.

If this is the case of your graph, you should see the straight line crossing from the left inferior quadrant to the right superior one.

The direction of the line suggests that one of the variables increases as the other one increases too. The current increases as the potential increases.

This is the case of the Ohm's law.

The current flowing through this component is __INVERSELY__ proportional to the potential difference across it.

If this is the case of your graph, you should see the straight line crossing the right quadrant from the superior left corner to the inferior right one.

The direction of the line suggests that the variable represented in the Y ax decreases as the other one increases.

For instance, The current decreases as the potential increases. Or the potential decreases as the current increases.

In the attached files you will find graphs of both options.

-------------------------

You can learn more about the Ohm's law at  

https://brainly.com/question/17286882?referrer=searchResults

You can learn more about the relationship between variables at

https://brainly.com/question/16937826?referrer=searchResults

https://brainly.com/question/21627823?referrer=searchResults

Answer: The relationship between variables might be either directly proportional to each other or inversely proportional to each other. For instance, the current flowing is directly proportional to the potential difference across it.

Explanation:

Answer:

Explanation:

You want the required centripetal force to equal gravity force

if m is the mass of the satellite

ma = mv²/R

a = v²/R

F = ma = GMm/R²

a = GM/R²

v²/R = GM/R²

v² = GM/R

v = √(GM/R)

v = √(6.674 x 10⁻¹¹(5.972 x 10²⁴)/6.771 x 10⁶)

v = 7.672 x 10³ m/s

Answer:

When the tides are especially weak, it is called a NEAP tide.

Explanation:

Hope this helps :)

Answer:

Neap

Explanation:

Answered!

The new oscillation frequency of the pendulum clock is 1.14 rad/s.

The given parameters;

The moment of inertia of the rod about the end is given as;

[tex]I_i = \frac{1}{3} ML^2[/tex]

The moment of inertia of the rod between the middle and the end is calculated as;

[tex]I_f = \int\limits^L_{L/2} {r^2\frac{M}{L} } \, dr = \frac{M}{3L} [r^3]^L_{L/2} = \frac{M}{3L} [L^3 - \frac{L^3}{8} ] = \frac{M}{3L} [\frac{7L^3}{8} ]= \frac{7ML^2}{24}[/tex]

Apply the principle of conservation of angular momentum as shown below;

[tex]I _i \omega _i = I _f \omega _f\\\\\frac{ML^2}{3} (1 \ rad/s)= \frac{7ML^2}{24} \times \omega _f\\\\\frac{24 \times ML^2}{3 \times 7 ML^2} (1 \ rad/s)= \omega _f\\\\1.14 \ rad/s = \omega _f[/tex]

Thus, the new oscillation frequency of the pendulum clock is 1.14 rad/s.

Learn more about moment of inertia of uniform rod here: https://brainly.com/question/15648129

Answer:

3,958.8 mi

Explanation:

Answer:

it is light

Explanation:

the arrow that says light is on the glass it must be near from tungsten

Answer:

Explanation:

s = ½at²

s = ½(9.50)(29.3²) = 4,077.8275

s = 4080 m

when rounded to the three significant digits of the question numerals.

Answer:

Explanation:

KEA = ½(50)5² = 625 J

KEB = ½(30)2² = 60 J

Student A has more kinetic energy.

More than ten times more kinetic energy due to both larger mass and higher velocity.

There are many ways you can get wooden steps to be less slippery even when they are wet. Some ways are:  

*You can put a carpet on the steps. The fibers in a carpet usually have some friction which will give you a grip as you climb up and/or down and prevent you from falling.  

*You can apply anti-slip coatings like a paint on the steps. If you add some sand to the paint to add traction and lessen the slippery nature. Alternatively, If the wood has been waxed, you may consider using a wax remover.  

*You can fix a hand railing so that you can hold on to it when you go up and down the steps.

Answer:

41.6m/s

Explanation:

P=mv

2500kg × 25m/s = 62500kgm/s

62500kgm/s ÷ 1500 kg = 41.6m/s

Answer:

0.47 J

Explanation:

Answer:

Mechanical energy into electrical energy

Explanation:

Answer:

ExplanMechanical energy into electrical energy

SIation:

Answer:

energy transformation

Answer: Energy Transformation & Energy Conversion.

The total charge in this time is equal to 144 Coulomb.

Given the following data:

To calculate the total charge in this time:

First of all, we would convert the value of time in minutes to seconds.

Conversion:

1 minute = 60 seconds

3 minutes = 180 seconds

Mathematically, the quantity of charge is given by this formula:

[tex]Q=It[/tex]

Where:

Substituting the given parameters into the formula, we have;

[tex]Q = 0.8 \times 180[/tex]

Quantity of charge, Q = 144 Coulomb.

Read more on charges here: https://brainly.com/question/4313738

Answer:

960 watts

Explanation:

Answer: Next time you create a question, add an image or PDF. Because I do not know the question. So, may you please create a new question?

Answer:

Hyperbolic comets originate from the Kuiper Belt.

42.9°

Explanation:

Let's assume that the x-axis is aligned with the incline and the positive direction is up the incline. We can then apply Newton's 2nd law as follows:

[tex]x:\;\;\;\;F - mg\sin{\theta} = 0\;\;\;\;[/tex]

[tex]\Rightarrow mg\sin{\theta} = F[/tex]

Note that the net force is zero because the block is moving with a constant speed when the angle of the incline is set at [tex]\theta.[/tex] Solving for the angle, we get

[tex]\sin{\theta} = \dfrac{F}{mg}[/tex]

or

[tex]\theta = \sin^{-1}\left(\dfrac{F}{mg}\right)[/tex]

[tex]\;\;\;= \sin^{-1}\left[\dfrac{34\:\text{N}}{(5.1\:\text{kg})(9.8\:\text{m/s}^2)}\right][/tex]

[tex]\;\;\;=42.9°[/tex]

Answer:

F = 0 N

Explanation:

The problem does not talk about any acceleration. We can just assume it always moves at a constant speed so the resultant force will be 0 newtons. Of course you could say that it accelerates for a certain amount of time, as the wind blows, but the problem doesn't tell us when to calculate the resultant force (if during the acceleration or after) + we don't have the mass of the jet.