Answer:
4.63rad/s
Explanation:
The centripetal force is expressed as;
F = mv²/r
M is the mass of the disk = 8kg
v is the linear speed = wr
r is the radius = 0.21m
Force = 36N
Write the force in term of the angular velocity
F = m(wr)²/r
F = mw²r²/r
F = mw²r
36 = 8w²(0.21)
36 = 1.68w²
w² = 36/1.68
w² = 21.43
w = √21.43
w = 4.63rad/s
Hence the angular speed is now 4.63rad/s
Why is our (a person's) gravitational pull NOT as strong as the Earth's gravitational pull
on us?
Gravity doesn't act on us
The Earth is closer to us than the Moon
Our mass doesn't change so the pull is really the same
We are much smaller than the Earth.
Answer:With gravity, two things with mass will want to move toward each other. However, we humans don't feel our gravity pulling on another person because it's not very big, but we do all feel the pull of Earth's gravity all the time - we're not all floating in the air, because that would be happening without Earth's gravity!
Explanation:
I WILL GIVE BRAINLIEST
In which of the following locations would most likely find parenchyma cells? Leaves roots flowers bark
Answer:
I would guess its leaves
Answer:
Leaves
Explanation:
A 1870 kg car traveling at 13.5 m/s collides with a 2970 kg car that is initally at rest at a stoplight. The cars stick together and move 1.93 m before friction causes them to stop. Determine the coefficient of kinetic friction between the cars and the road, assuming that the negative acceleration is constant and all wheels on both cars lock at the time of impact.
Answer:
The value is [tex] \mu = 0.72 [/tex]
Explanation:
From the question we are told that
The mass of the first car is [tex]m_1 = 1870\ kg[/tex]
the initial speed of the car is [tex]u = 13.5 \ m/s[/tex]
The mass of the second car is [tex]m_2 = 2970\ kg[/tex]
The distance move by both cars is s = 1.93 m
Generally from the law of momentum conservation
[tex]m_1 * u_1 + m_2 * u_2 = (m_1 + m_2 ) * v_f[/tex]
Here [tex]u_2 = 0[/tex] because the second car is at rest
and [tex]v_f[/tex] is the final velocity of the the two car
So
[tex]1870* 13.5+ 0= ( 1870 + 2970 ) * v_f[/tex]
=> [tex]v_f = 5.22\ m/s[/tex]
Generally from kinematic equation
[tex]v_f^2 = u_2^2 + 2as[/tex]
here a is the deceleration
So
[tex]5.22^2 = 0 + 2 *a * 1.93[/tex]
=> [tex]a = 7.06 \ m/s^2 [/tex]
Generally the frictional force is equal to the force propelling the car , this can be mathematically represented as
[tex]F_f = F[/tex]
Here F is mathematically represented as
[tex]F = (m_1 + m_2) * a[/tex]
[tex]F = (1870 + 2970) * 7.06 [/tex]
[tex]F =34170.4 \ N[/tex]
and
[tex]F_f = \mu * (m_1 + m_2 ) * g[/tex]
[tex]F_f = 47432 * \mu [/tex]
So
[tex] 47432 * \mu = 34170.4 [/tex]
=> [tex] 47432 * \mu = 34170.4 [/tex]
=> [tex] \mu = 0.72 [/tex]
A marathon is 26 mi and 385 yd long. Estimate how many strides would be required to run a marathon. Assume a reasonable value for the average number of feet/stride.
Answer:
According to the University of Iowa, the average length of a stride is 5ft.
Now, the total distance of the marathon is:
26mi and 385yd.
Let's transform that distance into ft.
1mi = 5280ft
Then:
26mi = 26*5280ft = 137,280ft
1yd = 3ft
then:
385yd = 385*3ft = 1,155ft.
Then the total distance of the marathon, in ft, is:
D = 137,280ft + 1,155ft = 138,435 ft.
Now the average number of strides needed will be equal to the quotient between the total distance of the marathon and the distance traveled in each stride.
N = 138,435ft/5ft = 27,687.
A 10-ohm resistor has a constant current. If 1200 C of charge flow through it in 4 minutes what
is the value of the current?
A. 3.0 A
B 5.0 A
C. 11 A
D. 15 A
E. 20A
Answer:
B 5.0 A .
Explanation:
Hello.
In this case, since we know the charge (1200 C), time (4 min =240 s) and resistance (10Ω) which is actually not needed here, we compute the current as follows:
[tex]I=\frac{Q}{t}[/tex]
Then, for the given data, we obtain:
[tex]I=\frac{1200C}{4min}*\frac{1min}{60s}\\\\I=5A[/tex]
Therefore, answer is B 5.0 A .
Best regards!
1. What is Ohm"s law?
2. If you placed a negatively charged hairbrush near your hair, what charge would your hair be?
3. You must change a lightbulb and the new lightbulb has a larger resistance. If the voltage of the battery does not change, what happens to the current going through the flashlight?
HELLPPPP
1. Ohm's law shows the relationship between:
voltagecurrentresistanceFormula: voltage = current x resistance
2. The negative charge on the hairbrush will induce a positive charge on your hair. As a result, your hair is going to be attracted to the hairbrush (and repelled by other strands of hair.)
3. V = IR, so if the resistance of the current increases, and the voltage of the current stays the same, there is as a result, going to be less current.
Best of Regards!
Six seconds after starting from rest, a car is moving at 15 m/s. What is the car's
average acceleration?
6 m/s2
0-5 m/s?
5 m/s2
2.5 m/s?
-2.5 m/s?
Answer:
2.5 m/s²
Explanation:
a = ∆v/∆t = (15 m/s)/(6 s) = (15/6) m/s² = 2.5 m/s²
A light wave in space is described by the general function: u(r, t) = 1 (2π) 3/2 Z dk A(k) e i(k·r−ωt) . (1) (a) Find the particular solution knowing that at t = 0 the wave is given by
Answer:
hello your question is incomplete attached below is the complete question
Answer : attached below
Explanation:
A) finding the particular solution at t = 0
attached below is the detailed solution of the particular solution knowing that t = 0
Research has shown that this type of interview is the most effective in predicting later job
performance.
Answer:
Situational Interview
Explanation:
A situational interview is about as close to the real job as it gets. During this type of interview, candidates may be presented with a visual or audio simulation of a scenario and asked to respond to it. They are asked to analyze a problem and profer suggestions on how they would handle it.
If the candidate has solved similar problems in the past, it will come to the fore.
If they haven't then the best outcome is that it will tell the interviewers how well the candidate is able to solve similar problems.
An example of a Situational Interview question is this:
How would you handle an angry customer who for no justifiable reason has decided to create a problematic scene to disrupt the business?
Because Situational Interviews are about behavioral responses (present, past, and future), they are powerful tools in determining or predicting future job performance. An interviewing technique that is developed using this methodology is called the S.T.A.R.
This is an acronym for Situation, Task, Action, Result.
Situation: the candidate is asked to present a challenging situation that occurred recently. This tests what the candidate sees as a challenging situation.
Task: The candidate based on the situation is asked to identify what they need to do to remedy the problem. This tells the interviewer(s) whether or not the candidate can think up a solution for the problem.
Action: Here they define the actual steps taken to resolve the problem
Result: The candidate against the above is required to give the result gotten
Action and Result tell the interviewer the quality of the candidate's ability to follow through and achieve the intended results. This also judges the quality of execution in terms of cost and time. The candidate with the lowest cost and time and the highest quality of outcome is considered the best.
Cheers
when hydrogen shares electrons with oxygen the outermost shell of the hydrogen atoms are full with how many electrons? and oxygens valence shell is full with how many electrons? because the valence shells of these atoms are full,the atoms are stable.
Answer:
2 and 8
Explanation:
please mark me brainiest I would really appreciate it.
Which of the filling is a fossil fuel?
a box with a Constance velocity has a 5 N of force applied to it from all sides and direction. what will happen to the motion of the box as result?
A-the object will come to rest
b-the velocity of the object will remain the same
c- the velocity of the object will decrease
d- the velocity of the object will increase
Answer:
b-the velocity of the object will remain the same
Explanation:
Forces from opposite sides cancel each other, so there is no net force on the box that would affect its motion. The velocity of the box will remain unchanged.
__
(The box may be crushed, but it will continue in the same direction at the same speed.)
Answer:
b the velocity of the object will remain the same
Explanation:
use your brain:)
If a power utility were able to replace an existing 500 kV transmission line with one operating at 1 MV, it would change the amount of heat produced in the transmission line to
Answer:
It would change the amount of heat produced in the transmission line to four times the previous value.
Explanation:
Given;
initial voltage in the transmission line, V₁ = 500 kV = 500,000 V
Final voltage in the transmission line, V₂ = 1 MV = 1,000,000
The power lost in the transmission line due to heat is given by;
[tex]P = \frac{V^2}{R}[/tex]
Power lost in the first wire;
[tex]P_1 = \frac{V_1^2}{R}[/tex]
[tex]R = \frac{V_1^2}{P_1}[/tex]
Power lost in the second wire
[tex]P_2 = \frac{V_2^2}{R}\\\\ R = \frac{V_2^2}{P_2}[/tex]
Keeping the resistance constant, we will have the following equation;
[tex]\frac{V_2^2}{P_2} = \frac{V_1^2}{P_1} \\\\P_2 = \frac{V_2^2P_1}{V_1^2}\\\\[/tex]
[tex]P_2 = \frac{(1,000,000)^2P_1}{(500,000)^2}\\\\P_2 =4P_1[/tex]
Therefore, it would change the amount of heat produced in the transmission line to four times the previous value.
In which region does the ocean get the most sunlight throughout the year?
A. Near the equator
B. Near the poles
C. Northern mid-latitudes
D. Southern mid-latitudes
Answer: a
Explanation:
The ocean near the equator gets the most sunlight throughout the year, therefore the correct option is A.
What is the equator?The Equator is an imaginary line passing through the middle of a globe. It is equidistant from the North Pole and the South Pole, Its is a horizontal line residing at 0 degrees latitude.
Because of the revolving position of the earth in the solar system, The ocean near the equator gets the most sunlight throughout the year, therefore the correct option is A.
Learn more about the equator from here
https://brainly.com/question/24203207
#SPJ5
Weight of a person's muscles, bones, tendons, and ligaments.
A. flexibility
B. lean mass
C. aerobic
An empty cup weighs 14 g. The same cup filled with ice cream weighs 120 g. All of the ice cream melts before anyone eats it.
What is the weight of the melted ice cream?
A.0 g
B. 14 g
C. 106 g
D. 134 g
Answer:
D
Explanation:
i need help, for physics
What kind of variation is there in the mechanical energy as the cart rolls down the ramp? Does this agree with your prediction? Explain.
Answer:
Em₀ = U = m g h , Em_{f} = K = ½ m v²
Explanation:
When a car is on a ramp it has a certain amount of mechanical energy. At the highest point of the ramp the mechanical energy is fully potential given by
Em₀ = U = m g h
As part of this energy descends down the ramp, part of this energy is transformed into kinetic energy and has one part of each, even though the sum remains the initial energy
Em = K + U = ½ m v² + mg y
y <h
when it reaches the bottom of the ramp it has no height therefore there is no potential energy, all of it has been transformed into kinetic energy
Em_{f} = K = ½ m v²
This energy transformation is in the case that the friction force is zero.
If there is a friction force, it performs work against the low car, it is reflected in an increase in the internal energy (temperature) of the car. In this case the energy in the lower part is less than the initial one by a factor
[tex]W_{nc}[/tex] = - fr L
therefore the numeraire values of the velocity are lower, due to the energy lost by friction.
A car stops in 130 m. If it has an acceleration of -5 m/s2 what was the cars starting velocity?
after
Variables:
Equation and Solve:
Answer:
We are given:
displacement (s) = 130 m
acceleration (a) = -5 m/s²
final velocity (v) = 0 m/s [the cars 'stops' in 130 m]
initial velocity (u) = u m/s
Solving for initial velocity:
From the third equation of motion:
v² - u² = 2as
replacing the variables
(0)² - (u)² = 2(-5)(130)
-u² = -1300
u² = 1300
u = √1300
u = 36 m/s
Who is the founding father of modern psychology?
Answer:
Sigmund Freud
Explanation:
Answer:
Wilhelm Wundt
the mass of the Moon is 7.35x1022kg and the mass of the Earth is 5.97x1024kg. The Moon’s orbit distance is 3.84x108m. What is the gravitational force on the Moon by the Earth? What is the gravitational force of the Earth on the Moon?
ok no ok no ok no ok no ok no ok no ok no
A pile of bricks of mass M is being raised to the tenth floor of a building of height H = 4y above the ground by a crane that is on top of the building. During the first part of the lift, the crane lifts the bricks a vertical distance h1=3y in a time t1=4T. During the second part of the lift, the crane lifts the bricks a vertical distance h2=y in t2=T. Which of the following correctly relates the power P1 generated by the crane during the first part of the lift to the power P2 generated by the crane during the second part of the lift?
A. P2=4P1
B. P2=43P1
C. P2=P1
D. P2=34P1
E. P2=13P1
Answer:
The correct option is B
Explanation:
From the question we are told that
The mass of the pile is M
The height is H = 4 y
The vertical distance achieve during the first lift is [tex]h_1 = 3 y[/tex]
The time taken is [tex]t_1 = 4T [/tex]
The vertical distance achieve during the second lift is [tex]h_2 = y[/tex]
The time taken is [tex] t_2 = T [/tex]
Generally the velocity of the crane during the first lift is
[tex]v _1 = \frac{h_1}{t_1 }[/tex]
=> [tex]v _1 = \frac{3 y}{4T }[/tex]
Generally the velocity of the crane during the second lift is
[tex]v _2 = \frac{h_2}{t_2 }[/tex]
=> [tex]v _2 = \frac{ y}{T}[/tex]
Generally the power generated by the crane during the first lift is
[tex]P_1 = F_1 * v_1[/tex]
Here [tex]F_1[/tex] is the weight of the brick which is mathematically represented as
[tex]F_1 = M * g [/tex] , g is the acceleration due to gravity
So
[tex]P_1 = Mg * \frac{3y}{4T}[/tex]
Generally the power generated by the crane during the first lift is
[tex]P_1 = F_2 * v_2[/tex]
Here [tex]F_2[/tex] is the weight of the brick which is mathematically represented as
[tex]F_2 = M * g [/tex] , g is the acceleration due to gravity
So
[tex]P_1 = Mg * \frac{y}{T}[/tex]
The ratio of the first power generated to the second power is
[tex]\frac{P_1}{P_2} = \frac{Mg * \frac{3y}{4T} }{ Mg * \frac{y}{T} }[/tex]
=> [tex]\frac{P_1}{P_2} = \frac{3}{4}[/tex]
=> [tex]P_2 = \frac{4}{3} P_1[/tex]
What do you mean is a variable velocity and uniform velocity
Answer:
Uniformly accelerated rectilinear motion (MRUA), also known as uniformly varied rectilinear motion (MRUV), is one in which a mobile moves along a straight path being subjected to a constant acceleration.
Explanation:
Name the part of the human eye which acts as a protective layer for the eye
Answer:
Cornea
Explanation:
Cornea protects outer layer of the eye.
A car is stopped for a traffic signal. When the light turns green, the car accelerates, increasing its speed from zero to 7.63 m/s in 3.94 s. What is the magnitude of the linear impulse experienced by a 73.7 kg passenger in the car during this time? Submit Answer Tries 0/20 What is the average force experienced by the passenger?
Answer:
1. p = 562.3 kg*m/s
2. F = 142.7 N
Explanation:
1. The linear impulse (p) is given by:
[tex] p = mv [/tex]
Where:
m: is the passenger's mass = 73.7 kg
v: is the speed = 7.63 m/s
[tex] p = mv = 73.7 kg*7.63 m/s = 562.3 kg*m/s [/tex]
Hence, the magnitude of the linear impulse experienced by a passenger is 562.3 kg*m/s.
2. The average force can be calculated using the following equation:
[tex] F = \frac{m(v_{f} - v_{0})}{t} = \frac{73.7 kg(7.63 m/s - 0)}{3.94 s} = 142.7 N [/tex]
Therefore, the average force experienced by the passenger is 142.7 N.
I hope it helps you!
According to Newton's first law, which characteristic of a moving object would remain constant if there were no other
forces acting on it?
O size
c
mass
O shape
O speed
Mark this and return
Save and Exit
NIKKI
Submit
Experiment 1: A study is done to determine which of two fuel mixtures allows a rocket to travel farther over a period of time. Rocket A, which requires additional equipment to keep it stable, is used to test one fuel mixture, and rocket B is used to test the other. Both rockets are identical aside from their mass. The results indicate that rocket B traveled farther than rocket A over the same period of time. Experiment 2: A double-blind experiment is performed to test whether a new drug is effective in lowering blood pressure. A random sample of subjects with high blood pressure is assigned to two groups. One group receives the new drug and the other group does not. Neither group is permitted to take any other medications during the experiment or to change their lifestyles in any way. The results of the experiment show that the drug is effective in lowering blood pressure.
Identify the experiment in which confounding occurs and the reason for its occurrence.
a. Neither experiment has a confounding variable.
b. Experiment 1 has a confounding variable related to the fuel mixtures. Varying the fuel mixture could skew the results of the study and should be kept constant.
c. Experiment 2 has a confounding variable related to the type of experiment. A double-blind experiment may increase the risk of the placebo effect and possibly skew the results.
d. Experiment 1 has a confounding variable related to the mass of the rockets. Any variation in mass may cause a discrepancy in the distance traveled.
e. Experiment 2 has a confounding variable related to the subjects used. Choosing a sample of subjects with high blood pressure instead of individuals with different blood pressure levels may confuse the results.
Answer: D
Experiment 1 has a confounding variable related to the mass of the rockets. Any variation in mass may cause a discrepancy in the distance traveled.
This is the answer to the question because:
Both experiments do have a confounding variable.Experiment 1 doesn't have to stay constant.A double-blind experiment will not do anything to the placebo.High blood pressure people will not make the results confusing.The answer has to be the option D. Hope this helps you!
I need help with this please
If a net force of 15N is applied to a 3kg box, what is the acceleration of the box?
Group of answer choices
5 m/s2
45 m/s2
0.2 m.s2
18 m/s2
Answer:
5
Explanation:
Bextra in bf x vi d sj by
Which two substances have no fixed shape and no fixed volume?
A: crystalline solid and noncrystalline solid
B: noncrystalline solid and liquid
C: plasma and liquid
D: gas and plasma
Answer:
D: gas and plasma
Explanation: