Spheres of Earth Assignment Active Analyzing Sphere Interactions Explain how Earth's spheres may be affected by the droughts brought on by El Niño. Sometimes, the surface of the Pacific Ocean warms up, causing changes in the weather in some areas. This phenomenon is called El Niño. El Niño causes the amount of rainfall in some parts of the United States and South America to increase. It also causes droughts to occur in Southeast Asia and Australia. Droughts occur when an area receives less rain than it normally does over a certain period.


help me on this question please. it is 7th grade science​

Explanation:

Statistical thermodynamics is a theory that uses molecular properties to predict the behavior of macroscopic quantities of compounds. ... From these energy-level data, a temperature-dependent quantity called the partition function can be calculated.

Answer:

the stastical thermodaynamics deal is essentially a theory that you can use the molecules and their properties in order to predict how the molecule will behave in a macroscopic quantities of compounds. Using this, you can also tell a temperature-dependent quantity called the partition function.

(I also didn't copy and paste this, so it's safe for you to use)

May I have brainliest please? :)

Time to slide down : 2.4 s

Given

total length of slide = 12 m

Randy's speed = 5 m/s

Required

time to slide down

Solution

Randy's motion can be said to be a straight, regular motion at a constant speed

Can be formulated

d = v x t

d = distance, m

v = velocity, m / s

t = time, s

we plug in the known values in the formula

[tex]\tt t=\dfrac{d}{v}\\\\t=\dfrac{12~m}{5~m/s}\\\\t=2.4~s[/tex]

Answer:

4.63 mol

Explanation:

Step 1: Write the balanced complete combustion reaction of acetylene

2 C₂H₂(g) + 5 O₂(g) ⟶ 4 CO₂(g) + 2 H₂O(g)

Step 2: Establish the appropriate molar ratio

According to the balanced equation, the molar ratio of C₂H₂ to O₂ is 2:5.

Step 3: Calculate the number of moles of O₂ needed to react with 1.85 moles of C₂H₂

We will use the stoichiometric molar ratio.

1.85 mol C₂H₂ × (5 mol O₂/2 mol C₂H₂) = 4.63 mol O₂

Answer:

The answer is 'All of the above'

Explanation:

because the hydrogen ions are represented by the symbol H+, they increase the PH value of a solution if less amount is added but they decrease the PH value of a solution if a larger amount of hydrogen ions are added but still they increase the PH value, and of course, they contribute to a solution by a base.

Answer:

Hydrogen ions are represented by H+.

Explanation:

Answer:

CH₂O₂

Mark me as brainliest plz.

Explanation:

CH2o2.is right ans hi I'm anmol kulkar from India

Answer:

Zinc reacts with dilute sulphuric acid to produce hydrogen gas (H2) and zinc sulphate. This is an example of displacement reaction of a non-metal by a metal. ... ZnSO4 is different in chemical composition and chemical properties than Zn and H2SO4 so it is a chemical change.

Answer:

Reaction of Zinc with Dilute Sulphuric Acid

Zinc is more reactive than hydrogen and it displaces hydrogen from dilute acids. Zinc reacts with dilute sulphuric acid to form zinc sulphate and hydrogen gas is evolved. This is a single displacement reaction of a non-metal by a metal. ... So, this reaction is a chemical change.

Answer:

54 g

Explanation:

Given data:

Mass of carbon = 18 g

Mass of CO₂ = 72 g

Mass of oxygen needed = ?

Solution:

Chemical reaction:

C + O₂     →       CO₂

according to law of conservation mass, mass can neither be created nor destroyed in a chemical equation.

This law was given by French chemist  Antoine Lavoisier in 1789. According to this law mass of reactant and mass of product must be equal, because masses are not created or destroyed in a chemical reaction.

In given photosynthesis reaction:

6CO₂ + 6H₂O + energy → C₆H₁₂O₆ + 6O₂

there are six carbon atoms, eighteen oxygen atoms and twelve hydrogen atoms on the both side of equation so this reaction followed the law of conservation of mass.

In a similar way,

C   +    O₂     →       CO₂

18 g +   X      = 72

X = 72 -18

X = 54 g

Thus, 54 g of O₂ are required.

Answer:

54g

Explanation:

Answer:

How does adding a lone pair affect the position of existing atoms and lone pairs? It decreases the angles between the atoms - the atoms are moving closer because they are being repelled further away from the lone pairs then they are from the other atoms

Explanation:

hope it helps!

Answer:

A. 0.225 mole of H₂

B. 0.113 mole of O₂.

Explanation:

We'll begin by calculating the number of mole in 4.05 g of water (H₂O). This can be obtained as follow:

Mass of H₂O = 4.05 g

Molar mass of H₂O = (2×1) + 16 = 2 + 16 = 18 g/mol

Mole of H₂O =?

Mole = mass /Molar mass

Mole of H₂O = 4.05 / 18

Mole of H₂O = 0.225 mole

Next, the balanced equation.

2H₂O —> 2H₂ + O₂

From the balanced equation above,

2 moles of H₂O produced 2 moles of H₂ and 1 mole of O₂.

A. Determination of the number of mole hydrogen produced.

From the balanced equation above,

2 moles of H₂O produced 2 moles of H₂.

Therefore, 0.225 mole of H₂O will also produce 0.225 mole of H₂.

B. Determination of the number of mole oxygen produced.

From the balanced equation above,

2 moles of H₂O produced 1 mole of O₂.

Therefore, 0.225 mole of H₂O will produce = (0.225 × 1)/2 = 0.113 mole of O₂.

Thus, 0.113 mole of O₂ is produced.

Answer:

D. (16.0 g + 16.0 g) × 100% / (32.1 g + 16.0 g + 16.0 g) = 49.9%

Explanation:

Step 1: Detemine the mass of O in SO₂

There are 2 atoms of O in 1 molecule of SO₂. Then,

m(O) = 2 × 16.0 g = 16.0 g + 16.0 g = 32.0 g

Step 2: Determine the mass of SO₂

m(SO₂) = 1 × mS + 2 × mO = 1 × 32.1 g + 2 × 16.0 g = 32.1 g + 16.0 g + 16.0 g = 64.1 g

Step 3: Detemine the mass percent of oxygen in SO₂

We will use the following expression.

m(O)/m(SO₂) × 100%

(16.0 g + 16.0 g) × 100% / (32.1 g + 16.0 g + 16.0 g) = 49.9%

Answer:

16.0 g + 16.0 g) × 100% / (32.1 g + 16.0 g + 16.0 g) = 49.9%

Explanation:

Answer:

V₁ = 0.585 L

Explanation:

Given data:

Initial pressure = 151 mmHg

Initial volume = ?

Final pressure = 166 mmHg

Final volume = 0.532 L

Solution:

The given problem will be solved through the Boyle's law,

"The volume of given amount of gas is inversely proportional to its pressure by keeping the temperature and number of moles constant"

Mathematical expression:

P₁V₁ = P₂V₂

P₁ = Initial pressure

V₁ = initial volume

P₂ = final pressure

V₂ = final volume  

Now we will put the values in formula,

P₁V₁ = P₂V₂

151 mmHg × V₁ = 166 mmHg × 0.532 L

V₁ = 166 mmHg × 0.532 L / 151 mmHg

V₁ = 88.312mmHg .L /151 mmHg

V₁ = 0.585 L

Answer:

physical property

Chemical property

melting point

Reactivity with a strong acid

Explanation:

The ability to conduct electricity is a physical property of copper. Most electrical cables are made of copper owing to its high electrical conductivity.

The rusting of iron is a chemical reaction. Rust is actually hydrated iron III oxide. Hence it is a chemical property of iron.

The melting points of metals can be used to classify them. The greater the density of metals, the higher their melting point.

The ability of metals to react with acids separates metals into highly reactive, moderately reactive and unreactive metals.

Copper shows physcal property & iron shows chemical property.

Physical properties are those properties which are seen by the eye due to change in the outermost appearance, whereas chemical properties are those which are shown due to change in the internal composition.

In the question, it is given that copper metal has a ability to conduct electricity and this property of metal is the physical property, as due to conduction their identity is not changing.

It is also given that iron is showing rusting due to the formation of iron oxide, so it a chemical property as identity of iron changes.

So, scientists characterize certain metals, they investigate physical properties like melting point, conductivity, density, etc. and chemical properties like reactivity with acid, base, oxygen, etc.

Hence, the ability to conduct electricity is a physical property of Cu and the ability of iron to rust is a chemical property.

To learn more about physical and chemical properties, visit the below link:

https://brainly.com/question/3143681

Answer:

metallic bonds are defined as those in which metals share valence electrons for example when sodium metallically bonds with itself each atom is sharing the electrons in the third orbital with up to eight other atoms the same thing happens with magnetism or other metals metallically bond to themselves.

Answer:

Ksp = 2.4 * 10⁻⁵

Explanation:

The equation for the dissolution and dissociation of CaSO4 in water is given as: CaSO₄ ---> Ca²⁺ + SO₄²⁻

The expression for the Ksp of the dissociation equation above is:

Ksp = [Ca²⁺] [SO₄²⁻]

The molar ratio of the dissociated ions and the solute is 1 : 1, this means that every 1 mole of CaSO₄ that dissolves produces 1 mole of Ca²⁺ and SO₄²⁻ each

The molar solubility of a substance is the number of moles that dissolve per liter of solution.

molar solubility of CaSO₄ = number of moles /liter of solution

number of moles of CaSO₄ = mass/molar mass

molar mass of CaSO₄ = 136 g/mol

number of moles of CaSO₄ = 0.67/136 = 0.0049 moles

molar solubility of CaSO₄ = 0.0049 mol/ 1 L =  4.9 * 10⁻³ moles per liter

therefore, molar solubility of CaSO₄ = 4.9 * 10⁻³

Ksp = (4.9 * 10⁻³) (4.9 * 10⁻³)

Ksp = 2.4 * 10⁻⁵

Answer:

2.4 * 10^-5

Explanation:

Molar solubility of CaSO4  = 0 .67 g/L/136 g/mol = 4.9 * 10^-3 Mol/L

Given that;

CaSO4(s) -------> Ca^2+(aq) + SO4^2-(aq)

Hence, Ksp = [Ca^2+] [SO4^2-]

Where  [Ca^2+] =[SO4^2-]=s

Ksp = s^2

since s = 4.9 * 10^-3 Mol/L

Ksp = (4.9 * 10^-3 Mol/L)^2

Ksp = 2.4 * 10^-5

Explanation:

Intermolecular forces are electrostatic in nature and include van der Waals forces and hydrogen bonds. ... The three major types of intermolecular interactions are dipole–dipole interactions, London dispersion forces (these two are often referred to collectively as van der Waals forces), and hydrogen bonds.May 20, 2018

Answer:

The correct answer is D

Explanation:

Wetlands are environments that are either submerged under water or are frequently wet. Marshes, swamps, bogs, and fens are examples of freshwater wetlands. Here small streams flow into larger streams and wetlands. The correct option is D.

Ecosystems in freshwater wetlands are impacted by transient or ongoing flooding. They are essential habitats for fauna (including migratory species), play a significant role in the regulation of water flow and water quality to entire catchments, and offer shelter for fauna during droughts.

In tropical and subtropical areas, mangrove swamps are coastal wetlands. In brackish to saline tidal waters, they are distinguished by halophytic (salt-loving) trees, shrubs, and other plants.

Thus the correct option is D.

To know more about wetlands, visit;

https://brainly.com/question/11438518

#SPJ6

Answer:

NaOH + H2SO4 ‐‐> 2H2O + Na2SO4;

Explanation:

NaOH+H2SO4= Na2SO4+H2O

Answer:

The element in question here is Scandium, with an atomic number of 21. It is situated in Group 3 and Period 4 of the Periodic Table.

Explanation:

Hope this helped!

Answer:

1. 3x-3=18

Value of x=7

2. 4x-5=23

value of x=7

Answer:

b 7 for one

a 3 for two

Explanation:

Answer:

Yes

Explanation:

Text me on here

Answer:

MgSO_3(s) + 2 HNO_3(aq) rightarrow Mg^2+(aq) + 2 NO_3^-(aq) + SO_2(g) + H_2O(l) b.

Explanation:

The balanced net ionic equation for the reaction of magnesium sulfite with nitric acid is a. MgSO_3(s) + 2 HNO_3(aq) rightarrow Mg^2+(aq) + 2 NO_3^-(aq) + SO_2(g) + H_2O(l) b.

Answer:

2C₂H₆ +  [7]O₂     →      [4]CO₂ + [6]H₂O

Explanation:

Chemical equation:

C₂H₆ +  O₂     →      CO₂ + H₂O

Balanced chemical equation:

2C₂H₆ +  7O₂     →      4CO₂ + 6H₂O

Step 1:

2C₂H₆ +  O₂     →      CO₂ + H₂O

Left hand side                      Right hand side

C = 4                                     C = 1

H = 12                                    H = 2

O = 2                                     O = 3

Step 2:

2C₂H₆ +  O₂     →      4CO₂ + H₂O

Left hand side                      Right hand side

C = 4                                     C =  4

H = 12                                    H = 2

O = 2                                     O = 9

Step 3:

2C₂H₆ +  O₂     →      4CO₂ + 6H₂O

Left hand side                      Right hand side

C = 4                                     C =  4

H = 12                                    H = 12

O = 2                                     O = 14

Step 4:

2C₂H₆ +  7O₂     →      4CO₂ + 6H₂O

Left hand side                      Right hand side

C = 4                                     C =  4

H = 12                                    H = 12

O = 14                                     O = 14

Answer:

tension, solubility, and melting and boiling points.

Explanation:

Answer:

The electrons are shared when atoms form bonds.

Answer:

ethane

Explanation:

Ethane is an organic chemical compound with chemical formula C ₂H ₆. At standard temperature and pressure, ethane is a colorless, odorless gas. Like many hydrocarbons, ethane is isolated on an industrial scale from natural gas and as a petrochemical by-product of petroleum refining

Answer:

Explanation:

The volume of a substance when given the density and mass can be found by using the formula

[tex]volume = \frac{mass}{density} \\[/tex]

From the question we have

[tex]volume = \frac{368}{19.5} \\ = 18.871794..[/tex]

We have the final answer as

Hope this helps you