two examples for magnetic and nonmagnetic materials​

Answer:

The correct answer is option C "They have same general formula"

Explanation:

Hydrocarbons are any of a class of natural substance intensifies made distinctly out of the components carbon (C) and hydrogen (H). The carbon particles consolidate to shape the structure of the compound, and the hydrogen molecules append to them in various arrangements.

Hydrocarbons are the chief constituents of oil and gaseous petrol. They fill in as powers and ointments just as crude materials for the creation of plastics, strands, rubbers, solvents, explosives, and modern chemical substances.

All of the compounds given are alkanes and they have the same general formula which is represented by CnH2n+2, where ‘n’ is the number of carbon atoms.

Answer:

A

B

A

B

B

Explanation:

B - MIXTURE

A - COMPOUND

Answer:

Because as we move down the group size/ radius of atom increases due to increase in shells and screening effect. The hold of nucleus on valence electrons decreases and effective nuclear charge decreases so it is easy to remove electron from greater sized atoms as compared to smaller sized aroms.

Energy required to remove electron is ionization energy so greater sized atoms have low ionization energy.

Explanation:

Mass of Magnesium nitrate formed : 731.86 g

A reaction coefficient is a number in the chemical formula of a substance involved in the reaction equation. The reaction coefficient is useful for equalizing reagents and products.

Reaction

Mg + 2AgNO₃ → Mg(NO₃)₂ + 2 Ag

moles of silver nitrate, AgNO₃ = 9.87

mole ratio AgNO₃ : Mg(NO₃)₂ = 2 : 1, so mol Mg(NO₃)₂ :

[tex]\tt \dfrac{1}{2}\times 9.87=4.935[/tex]

mass of Mg(NO₃)₂(MW=148,3 g/mol) :

[tex]\tt mass=mol\times MW\\\\mass=4.935\times 148,3\\\\mass=731.86~g[/tex]

Answer:

red beryl

Explanation:

Red Beryls = Density range is 2.63g/cm3 to 2.92 g/cm3

Rubies = Density Range is 3.9 g/cm3 to 4.1 g/cm3

Mass of stone = 4.35 g

Volume of solid = change in water level = 1.5 mL = 1 cm3

Relationship between mass, volume and density is given by;

Density = Mass / Volume

Density = 4.35 / 1.5 = 2.9 g/cm3

The density of the stone falls in the red beryls range hence it is a red beryl.

Answer:

Whether the forces of attraction is strong or weak is explained below in details.

Explanation:

There are three distinct kinds of intermolecular forces in expressions of energy. They are (strongest to weakest) dipole-dipole, hydrogen bonding, and Van der Waals' strengths. Intermolecular forces are weak related to intramolecular forces – the energies which endure a molecule collectively. For instance, the covalent bond, including distributing electron sets among atoms, is much more powerful than the forces impersonate among neighboring molecules.

Explanation:

Reaction of zinc metal in copper sulfate solution.

[tex]\begin{array}{ll}\text { Oxidation : } & \mathrm{Zn}(s) \rightarrow \mathrm{Zn}^{2+}(a q)+2 e^{-}\\\text {Reduction : } & \mathrm{Cu}^{2+}(a q)+2 e^{-} \rightarrow \mathrm{Cu}(s) \\\hline \text { Full Reaction : } & \mathrm{Zn}(s)+\mathrm{Cu}^{2+}(a q) \rightarrow \mathrm{Zn}^{2+}(a q)+\mathrm{Cu}(s)\end{array}[/tex]

Zinc is listed above copper on the activity series, this means that zinc is more easily oxidized than copper. That is why copper(II) ions can act as an oxidizing agent when put into contact with zinc metal. Ions of any metal that is below zinc, such as lead or silver, would oxidize the zinc in a similar reaction.

Answer:

1.)[tex]Al_{2} O_{3}[/tex]

2.) [tex]Li_{3} N\\[/tex]

3.) 2HCl

4.) MgO

5.) Mg and [tex]O_{2}[/tex]

6.) [tex]H_{2}[/tex] and [tex]O_{2}[/tex]

7.)Na and [tex]Br_{2}[/tex]

8.) 3 aluminums and 3 chlorides

Explanation:

Answer:

BLOOD - the definition of blood is the fluid carries oxygen

Explanation:

sana po makatulong♡♡

Answer:

uhh the first one is the baby plants are gentically simulator  to the parent  if its wrong im sorry

Explanation:

Answer:

Equal number of moles

Explanation:

Thats life

Sir Alexander Fleming (6 August 1881 – 11 March 1955) was a Scottish physician and microbiologist, best known for discovering the enzyme lysozyme and the world's first broadly effective antibiotic substance which he named penicillin.

For this discovery he shared the Nobel Prize in Physiology or Medicine in 1945 with Howard Florey and Ernst Boris Chain.

he was a british doctor, born in august 6, 1881. he was also known as pharmacologist.

you can always search your question in goo, and you'll get a very short answer :)

Answer:

Explanation:

The momentum of an object can be found by using the formula

momentum = mass × velocity

From the question we have

momentum = 3 × 3

We have the final answer as

Hope this helps you

Answer:

D

Commutator is the answer

Explanation:

The commutator systematically converts the current direction between the rotor and the outer circuit. As the shaft revolves, the commutator converts the course of current in a winding. For a separate armature winding, when a cylinder has reached one-half perfect turn, the winding is now attached so that current passes through it in the reverse of the original direction.

Answer:

D. Commutator

Explanation:

I just took the quiz. credit to the person above me.

Answer:

If a liquid is heated the particles are given more energy and move faster and faster expanding the liquid. The most energetic particles at the surface escape from the surface of the liquid as a vapour as it gets warmer. Liquids evaporate faster as they heat up and more particles have enough energy to break away.

Explanation:

Answer:

it's chemical

Explanation:

Answer:

See explanation and image attached

Explanation:

The IUPAC system of nomenclature enables the structure of molecules to be written seamlessly from the name of the compound. Hence it is commonly called the systematic nomenclature.

The parent chain here is propane. It is substituted at the 2- position by a methyl group and at the 3-position by 4-chlorophenyl group as we can see in the image attached to this answer.

Answer:

Materials that prevent heat to flow are known as heat insulators.

Explanation:

hope it helps! ฅ'ω'ฅ

Answer:

D. decomposing

General Formulas and Concepts:

Chemistry

Explanation:

A would be incorrect because mixing 2 things together doesn't necessarily create a chemical change. Take oil and water for example. You can mix the 2 and it would not have a chemical change.

B would be incorrect because you are simplify changing the state of matter of the object. Iron in solid form is still iron in liquid form; there is no chemical change.

C would be incorrect for similar reasons as B. You are simply changing the state of matter.

D would be the remaining and correct answer. Decomposing changes one object into a different one by chemically changing.

Answer:

3 valence electrons

Explanation:

Because aluminum has three, that means three fluorines can bond. The make the formula AlF3, also known as aluminum trifluoride. Each of the fluorine atoms gets an electron to fill their shell, and the aluminum loses three, giving it a filled shell too (remember, aluminum has three extra electrons).

Answer:

chemical change

Explanation:

particals react to temperature wheteher its cold or warm

The  particles begin to move at a higher speed. It is a physical change.

Temperature is defined as the average kinetic energy of the particles of a body. Hence, when a body is heated, the kinetic energy and consequently the speed of its particles increases.

This increase in particle speed is reversed when the system cools down. Recall that a physical change is easily reversible while a chemical change is not easily reversible.

As such, this increase of particle speed with temperature is a physical and not a chemical change.

https://brainly.com/question/11321843

Answer:

The relative atomic mass of chlorine depends on the ratio between the abundance of these two naturally-occurring isotopes.

Explanation:

The relative atomic mass of an element is a weighted average of the atomic mass of its naturally-occurring isotopes. The relative abundance of each isotope gives its weight in this weighted average.

For these two naturally-occurring isotopes of chlorine:

[tex]\begin{array}{|c|c|c|}\cline{1-3} \text{Isotope} & \text{Atomic Mass} & \text{Relative Abundance}\\ \cline{1-3} ^{35}{\rm Cl} & \approx 34.968\; \rm Da} & \approx 0.758 \\ \cline{1-3} ^{37}{\rm Cl} & \approx 36.966\; \rm Da & \approx 0.242 \\ \cline{1-3}\end{array}[/tex].

[tex]\begin{aligned}&\text{relative atomic mass of Cl} \\ &= \text{atomic mass of $^{35}{\rm Cl}$} \times \text{relative abundance of $^{35}{\rm Cl}$} \\&\quad + \text{atomic mass of $^{37}{\rm Cl}$} \times \text{relative abundance of $^{37}{\rm Cl}$} \\ &\approx 34.968\; \rm Da \times 0.758 + 36.966\; \rm Da \times 0.242 \\ &\approx 35.45\; \rm Da \end{aligned}[/tex].

The relative abundance of [tex]^{35}{\rm Cl}[/tex] is much higher than that of [tex]^{37}{\rm Cl}[/tex]. Consequently, the relative atomic mass of the element [tex]\rm Cl[/tex] is closer to the atomic mass of [tex]^{35}{\rm Cl}\![/tex] than that of [tex]^{37}{\rm Cl}\![/tex].

Answer:

i looked it up its slinky waves

Explanation:

Answer:

diffracted

Explanation:

Sure it might look like a slinky but if you're talking about waves then it's deffinetly diffracted hope this helps

Answer:

c

Explanation:

Answer:

A, And D

Explanation:

I did this before and i got it right ❤

Answer:

solid

decrease

smaller

Explanation:

f

Answer:

c

Explanation:

i doubt it

The coefficients and molar masses are used to calculate the amounts of molecules. Hence, option C is correct.

The smallest particle of a substance has physical and chemical properties of that substance. Molecules are made up of one or more atoms.

A molecule can be determined by how much is produced in a reaction through the coefficients and molar masses are used to calculate the amounts of molecules.

Hence, option C is correct.

Learn more about molecules here:

https://brainly.com/question/14130817

#SPJ5

Answer:

Location: nucleus, contribution to mass: usually about half, charge: positive

Explanation:

Protons are a part of the nuclear particles alongside the neutrons. Protons and neutrons are all together called sub-atomic particles and they share the nucleus at the center of an atom together.

Answer:

The formation of the bond releases energy. This is because the individual hydrogen atoms are more unstable than when they are joined together. Stability brings about the release of energy, and this would be an exothermic reaction.

Answer:

There are different types of soil in the earth. Those different types of soil helps the earth stay healthy in many ways!! Just like the different layers in the earth. There are so many different layers in the earth so that the plants get the different nutrition they need. Not only that but it cleans the water that soaks in the ground.

There are 6 different types of soil, they are; sandy soil, clay soil, silt soil, peat soil, chalk soil, and loam soil.

Explanation:

Sandy soil

Sandy Soil is light, warm, dry and tend to be acidic and low in nutrients. Sandy soils are often known as light soils due to their high proportion of sand and little clay (clay weighs more than sand). These soils have quick water drainage and are easy to work with. They are quicker to warm up in spring than clay soils but tend to dry out in summer and suffer from low nutrients that are washed away by rain. The addition of organic matter can help give plants an additional boost of nutrients by improving the nutrient and water holding capacity of the soil.

Clay Soil

Clay Soil is a heavy soil type that benefits from high nutrients. Clay soils remain wet and cold in winter and dry out in summer. These soils are made of over 25 percent clay, and because of the spaces found between clay particles, clay soils hold a high amount of water. Because these soils drain slowly and take longer to warm up in summer, combined with drying out and cracking in summer, they can often test gardeners.

Silt Soil

Silt Soil is a light and moisture retentive soil type with a high fertility rating. As silt soils compromise of medium sized particles they are well drained and hold moisture well. As the particles are fine, they can be easily compacted and are prone to washing away with rain. By adding organic matter, the silt particles can be bound into more stable clumps.

Peat Soil

Peat soil is high in organic matter and retains a large amount of moisture. This type of soil is very rarely found in a garden and often imported into a garden to provide an optimum soil base for planting.

Chalk Soil

Chalk soil can be either light or heavy but always highly alkaline due to the calcium carbonate or lime within its structure. As these soils are alkaline they will not support the growth of ericaceous plants that require acidic soils to grow. If a chalky soil shows signs of visible white lumps then they can’t be acidified and gardeners should be resigned to only choose plants that prefer an alkaline soil.

Loam Soil

Loam soil is a mixture of sand, silt and clay that are combined to avoid the negative effects of each type. These soils are fertile, easy to work with and provide good drainage. Depending on their predominant composition they can be either sandy or clay loam. As the soils are a perfect balance of soil particles, they are considered to be a gardeners best friend, but still benefit from topping up with additional organic matter.

Those are the different types of soils with all of their many uses. I hope this helps!!!!! Have a wonderful day!!!