Answer:b
Explanation:
Answer:
The lobster let the claw go. so, B.
Explanation:
i hope this helps.
What is 1 radian approximately in degrees?
Answer:
180 LUV:)
Explanation:
What is the acceleration of a box weighing 596 N if a force of 777 N is applied to it?
Answer:
[tex]12.79 m/s^2[/tex]
Explanation:
1. Apply Newton's 2nd law:
[tex]F=ma[/tex]
2. Use the definition of weight to find the mass of the box:
[tex]W=mg=m=\frac{W}{g}[/tex]
3. Solve for acceleration in Newton's 2nd law and substitute for mass:
[tex]a=\frac{F}{\frac{W}{g} }[/tex]
4. Plug in the given values from the question and assume [tex]g=9.81m/s^2[/tex]:
[tex]a=\frac{777N}{\frac{596N}{9.81m/s^2} } } =12.79m/s^2[/tex]
A single paragraph can be selected by triple in the paragraph. ture or false
Answer:
The answer for the question should be True
Eric drops a 2.20 kg water balloon that falls a distance of 45.08 m off the top of a
building. What is the kinetic energy at the bottom?
Answer:
972 J
Explanation:
At the bottom, all the gravitational potential energy was converted into kinetic energy. If you calculate the GPE, its value will be the same that the KE at the bottom. The GPE can be calculated this way:
GPE = mass×gravity×heigth
GPE = 2.2×9.8×45.08 ≈ 972
4. Your group used an object with fixed mass (heavy or light). How will the results be different
for an object with a different mass?
Why did humans first develop culture?
A. It helped humans distinguish themselves from wild animals.
B. It helped humans become the dominant species on Earth.
C. It helped the members of a society survive in their environment.
D. It helped individuals survive without the support of a society.
SUBMIT
Answer: C.
Correct me if I'm wrong.
70 POINT!!!
IF YOU DON'T KNOW THE ANSWER DO NOT PUT A COMMENT BELOW
THERE ARE TWO QUESTIONS YOU HAVE TO ANSWER
QUESTION 1: Identify any variables that are present as dependent variables, independent variables, and constants in your experimental group and your control group.
QUESTION 2: How does knowing the properties of matter help you separate the substances in mixtures?
Answer:
1) Dependent variable: Type of separation method used
Independent variables: Substance that separated out
Constants: Sand, pepper, and salt
2) you can use the properties of matter to decide on a method to separate out a particular substance based on its unique properties. For example, knowing pepper has a very small mass allows you to use the charge of the static electricity to separate out those particles. Additionally, knowing the solubility of salt allows you to add water to the mixture to be able to remove it from the sand, since the salt dissolves in the water which is poured away.
Please solve this This is my exam question please be fast
Answer:
OK sure why not!!!!!!!!!!!!
I tossed a ball straight up into the air and timed how long it took to return to the height I tossed it from. It took 4.2s. How fast did I throw the ball into the air?
Explanation:
[tex]v = u + at \\ 0 = u + ( - 10 { ms}^{ - 2}) \times 4.2s \\ u = 42 {ms}^{ - 1} [/tex]
determine the total current on the circuit bellow
Answer:
170/179 A ≈ 949.7 mA
Explanation:
Finding equivalent impedance of a bridge network can be simplified by converting one end of it from a Δ to a Y configuration. The equivalent resistance in the Y connection is the product of the two resistors connected to that node, divided by the sum of all three resistors.
Considering the left side of the top two branches, the equivalent Y network values are ...
(10)(15)/(10+15+25) = 150/50 = 3 . . . ohms
connected to the right-end node
(25)(10)/50 = 5 . . . ohms
connected to the top-center node, and ...
(25)(15)/50 = 7.5 . . . ohms
connected to the center node of the middle branch.
__
Then the top two branches of this circuit have an equivalent impedance equal to 3 ohms in series with the parallel combination of (5+20) ohms and (7.5+10) ohms. That value is ...
3 + (25)(17.5)/(25 +17.5) = 226/27 ≈ 13.294 . . . ohms
This, in turn, is in series with the 2.5 ohms in the bottom branch, bringing the total circuit resistance to about 15.794 ohms, or 537/34 ohms.
The total source current is then ...
I = V/R = (15 v)/(537/34 Ω) = 170/179 A ≈ 0.9497 A
_____
Alternate solutions
Alternatively, you can write and solve three node or loop equations for this circuit. For example, the equations for CCW loop currents, with I1 as the bottom loop, could be written in augmented matrix form as ...
[tex]\left[\begin{array}{ccc|c}27.5&-10&-15&-15\\-10&55&-25&0\\-15&-25&50&0\end{array}\right][/tex]
The result is the same.
ПОМОГИТЕ ПЖЖППЖЖППЖЖПЖЖПЖПЖПЖ ООООООЧЕНЬ СРОЧНО!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! С ДАНО И РЕШЕНИЕМ!!!!!!
4. У сталевій коробці
масою 250 г
розплавляють 100 г
свинцю. Яка кількість
теплоти витратилася
на теплові процеси,
якщо початкова
температура тіл
становила 27 °С?
Answer:
thanks for the points dia
A cylindrical region of radius R contains a uniform magnetic field parallel to its axis. The field is zero outside the cylinder. If the magnitude of the field is changing at the rate dB/dt, the electric field induced at a point 2R from the cylinder axis is:
The magnitude of the induced electric field is (RdB/dt)/4
The induced electric field is gotten from
-∫E.dl = dФ/dt where E = induced electric field, dl = path length vector, Ф = magnetic flux through cylindrical region = AB where A = area of magnetic flux = πR² where R = radius of cylindrical region and B = magnetic field.
So, -∫E.dl = dФ/dt
-∫E.dl = dAB/dt
-∫Edlcos0 = AdB/dt (where E.dl = Edlcos0 = Edl since E and dl are parallel to each other.)
So -∫Edl = πR²dB/dt
-E∫dl = πR²dB/dt (∫dl = 2πr since the integral is the circumference of the path)
-E(2πr) = πR²dB/dt (we integrate dl from r = 0 to 2R)
-E2π(2R - 0) = πR²dB/dt
-E4πR= πR²dB/dt
E = πR²dB/dt ÷ 4πR
E = -(RdB/dt)/4
So, the magnitude of the induced electric field is (RdB/dt)/4
Learn more about induced electric field here:
https://brainly.com/question/15730392
g A 150-kg object and a 450-kg object are separated by 4.90 m. (a) Find the magnitude of the net gravitational force exerted by these objects on a 39.0-kg object placed midway between them. 130000000000 Incorrect: Your answer is incorrect. Draw a picture of the three objects, including the forces exerted on the third. N (b) At what position (other than an infinitely remote one) can the 39.0-kg object be placed so as to experience a net force of zero from the other two objects
Answer:
BBbbb
Explanation:
B is the correct answer:))))
A very bouncy mushroom can be modeled as mass of 30g(the mushroom cap) on top of a spring(the mushroom stalk) when spring constant 20 N/m. A bird of mass 50g lands on the mushroom gently so that its velocity is zero when it lands. Questions are in the image.
The motion of the bouncy mushroom can be described as a simple
harmonic motion, SHM.
a) The equilibrium height of the mushroom is 0.024525 m below its initial heightb) The frequency of resulting oscillation is 0.5 Hzc) The maximum compression of the mushroom 0.03924 md) The equation that describes the oscillation of the mushroom as a function of time is; [tex]\underline{x(t) = 0.014715 \cdot cos(0.5\cdot t)}[/tex]Reasons:
The given parameters are;
Mass of the mushroom cap, m = 30 g = 0.03 kg
Mass of the bird = 50 g = 0.05 kg
The spring constant, K = 20 N/m
a) The equilibrium height of the mass spring system, is given as follows;
F = -K·x
[tex]x = \dfrac{F}{K}[/tex]
The applied force, F = The weight of the bird
∴ F = (0.05 kg) × 9.81 m/s² = 0.4905 N
[tex]x = \dfrac{0.05 \, kg \times 9.81 \ m/s^2}{20 \, N/m} = 0.024525 \, m[/tex]
The equilibrium height of the mushroom is 0.024525 m below its initial height.
b) The frequency of oscillation of a spring, ω, is given as follows;
[tex]\omega = \sqrt{\dfrac{K}{m} }[/tex]
Therefore;
[tex]\omega = \sqrt{\dfrac{20 \, N/m }{80 \, kg} } = \dfrac{1}{2} \, Hz[/tex]
The frequency of resulting oscillation, ω = [tex]\dfrac{1}{2} \, Hz[/tex] = 0.5 Hz
c) The applied force, F = The weight of the bird and the mushroom cap
F = (0.03 kg + 0.05 kg) × 9.81 m/s² = 0.7848 N
[tex]x = \dfrac{0.7848 \, N}{20 \, N/m } = 0.03924 \, m[/tex]
The maximum compression of the mushroom = 0.03924 m
d) The motion of the mushroom is a Simple Harmonic Motion, SHM.
The equation of a SHM as a function of time is; x(t) = A·cos(ω·t + Φ)
For the mushroom, we have;
The amplitude, A = 0.03924 m - 0.024525 m = 0.014715 m
Ф = The phase angle
When t = 0, cos(ω × 0 + Φ) = 1
cos(Φ) = 1
Ф = arcos(1) = 0
The equation is therefore;
x(t) = 0.014715·cos(0.5·t)
Equation of the oscillation of the mushroom is; [tex]\underline{x(t) = 0.014715 \cdot cos(0.5\cdot t)}[/tex]
Learn more here:
https://brainly.com/question/15487931
why is cooking faster with a pressure cooker. plz help me I beg
Explanation:
The same thing happened in pressure cooker but the temperature inside is most higher.
hope you like my answer
thank you
Because cooking reactions speed up at a higher temperature also the boiling temperature of water increases and hence, the food cooks faster.
source:
https://www.vedantu.com/question-answer/a-pressure-cooker-reduces-cooking-time-for-food-class-9-chemistry-cbse-5feaba32e9fb3d3419e4a61a
please.
I mark u brainliest answer
Answer:
destroy
Explanation:
cuz if anyhow throw rubbish, it will affect/destroy the world environment
Answer:
bathing regularly 2pollute 3 throwing waste in land water water pollution
define moment of a force about a point and give the si unit of moment?
Answer:
Moment of a force is the product of the force and the perpendicular distance of force from axis of rotation.
The SI unit of force is newton (N).
Explanation:
Hope it helps you again!
:)))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))
Good morning dear...
Have a beautiful and joyful day ahead.
what were your preparetion before going the different physical fitness test?
Answer:
Avoid heavy strenuous exercise for the 24 hours prior to testing. Do not exercise at all on the day of testing to ensure you are well rested. Wear appropriate clothing for the conditions (e.g. shorts/track pants and t-shirt/singlet/sports top) and non-slip athletic footwear with laces securely fastened
If you represented Earth's history by a line that is 1 m long, how long a segment (in cm) would represent the 400 million years since life moved onto the land
The length of the segment that will represent the 400 million years is 8.8 cm.
The given parameters:
length of age of the Earth = 1 meter longage of the Earth = 4.54 billion yearstime to be represented in the given segment = 400 million yearsThe length of the segment that will represent the 400 million years is calculated as follows;
4.54 billion years ------------- 1 m
400 million years ------------- ?
[tex]\frac{1 \ m}{4.54 \times 10^9 \ years} \times 400 \times 10^6 \ years = 0.088 \ m[/tex]
The length of the segment in centimeters (cm) is calculated as follows;
[tex]= 0.088 \ m \times 100 \ cm\\\\= 8.8 \ cm[/tex]
Learn more here:https://brainly.com/question/19471802
Although genes contribute to whatever IQ scores measure, IQ can change radically due to changes in the __________.
Answer: Even though the genetic susceptibility plays a crucial role on the IQ of the individual, various modifiable environmental factors like education, premature birth, nutrition, pollution, drug and alcohol abuse, mental illnesses, and diseases can have an influence on an individual's IQ.
groundwater returning to earths surface comes up through a ___?
Answer:
Groundwater Returning to earths Surface come Up Though A drought
Explanation:
THIS DOES NOT NEED TO BE EXPLAINED IT'S EZZZ
A grinding wheel is a uniform cylinder with a radius of 8.50 cm and a mass of 0.380 kg. Calculate (a) its moment of inertia about its center, and (b) the applied torque needed to accelerate it from rest to 1750 rpm in 5.00 s. Take into account a frictional torque that has been measured to slow down the wheel from 1500 rpm to rest in 55.0 s.
Hi there!
(A)
A grinding wheel is the same as a disk, having moment of inertia of:
[tex]I = \frac{1}{2}MR^2[/tex]
Plug in the given mass and radius (REMEMBER TO CONVERT) to find the moment of inertia:
[tex]I = \frac{1}{2}(0.380)(0.085)^2 = 0.00137 kgm^2[/tex]
(B)
We can use the rotational equivalent of Newton's Second Law to calculate the needed torque:
Στ = Iα = τ₁ - τ₂
Begin by solving for the angular acceleration. Convert rpm to rad/sec:
[tex]\frac{1750r}{min} * \frac{1 min}{60 s} * \frac{2\pi rad}{1 r} = 183.26 rad/sec[/tex]
Now, we can use the following equation:
ωf = wi + αt (wi = 0 rad/sec, from rest)
183.26/5 = α = 36.65 rad/sec²
τ = Iα = 0.0503 Nm
Since there is a counter-acting torque on the system, we must begin by finding that acceleration:
[tex]\frac{1500r}{min} * \frac{1 min}{60 s} * \frac{2\pi rad}{1 r} = 157.08 rad/sec[/tex]
ωf = wi + αt
-157.08/55 = α = -2.856 rad/sec²
τ₂ = Iα = 0.0039 Nm
Now, calculate the appropriate torque using the above equation:
[tex]\Sigma\tau = \tau_1 - \tau_2[/tex]
[tex]\Sigma\tau + \tau_2 = \tau_1[/tex]
[tex]0.0503 + 0.0039 = \large\boxed{0.054 Nm}[/tex]
organize the three states of matter from least kinetic energy to greatest kinetic energy
Particle arrangement and movement
⇒ In terms of relative energy, gas particles have the most energy, solid particles have the least energy and liquid particles are somewhere in between. (All compared at the same temperature.)
- BRAINLIEST answerer
Electric field is defined as force per charge. It is measured in units of newtons divided by _______
Answer:
newtons per coulomb
Give four characteristics of forces.
Answer:
Force has both magnitude and direction.More than one force can be applied on an object.Forces applied in the same direction add up to each other.It may change the shape of an object.Explanation:
Hope it helps you!!Explanation:
Characteristics of Force:
Forces are due to an interaction of at least two objects. It may change the state of motion of an object. It may change the shape of an object. Forces applied on an object in the same direction add to one another and the resultant is in the same direction.
A 67 kg soccer player uses 5100 kJ of energy during a 2.0 h match. What is the
average power produced by the soccer player?
The average power produced by the soccer player is 710 Watts.
Given the data in the question;
Mass of the soccer player; [tex]m = 67kg[/tex]Energy used by the soccer player; [tex]E = 5100KJ = 5100000J[/tex]Time; [tex]t = 2.0h = 7200s[/tex]Power; [tex]P =\ ?[/tex]
Power is simply the amount of energy converted or transferred per unit time. It is expressed as:
[tex]Power = \frac{Energy\ converted }{time}[/tex]
We substitute our given values into the equation
[tex]Power = \frac{5100000J}{7200s}\\\\Power = 708.33J/s \\\\Power = 710J/s \ \ \ \ \ [ 2\ Significant\ Figures]\\\\Power = 710W[/tex]
Therefore, the average power produced by the soccer player is 710 Watts.
Learn more: https://brainly.com/question/20953664
Which event provides evidence that matter can reflect waves?
A. A dog's bark is barely heard through double-pane windows.
B. A bat finds a moth using echolocation.
C. A whale's song is heard hundreds of miles away,
D. A fish appears to be farther from a boat than it is.
Answer:
B. A bat finds a moth using echolocation
Explanation:
100% i just took that test today
Another nervous papa bear paces at 1.0 m/s north for 3.0 s, then at 1.6 m/s south for 5.0 s, and then
at 1.4 m/s north for 4.0 s. The average speed of this bear is:
a) 1.3 m/s
b) 1.4 m/s
c) 4.0 m/s
d) 8.0 m/s
Answer:
Explanation:
Average speed is total distance traveled over the time needed to do so.
d = vt
v = (1.0(3.0) + 1.6(5.0) + 1.4(4.0) / (3.0 + 5.0 + 4.0)
v = 16.6 / 12
v = 1.383333333...
v = 1.4 m/s
The passage of a wave through a medium is...?
Answer:
Transmission
Explanation:
It’s the passage of electromagnetic waves through a medium.
The passage of a wave through a medium is known as transmission.
What is the transmission of a wave?The transmission of waves may be characterized as a wave traveling through a medium or into a new medium. Not all waves transmit through the same materials. It significantly depends on the type of wave, the type of material, and even the frequency of the wave.
Transmission is generally the passage of electromagnetic radiation through a medium. While Reflection is the process by which electromagnetic radiation is returned either at the boundary between two media (surface reflection) or at the interior of a medium (volume reflection).
Waves can go through things. Waves go through water, light can pass through the glass, and sound can pass through walls. The material the wave passes through is called a medium. A single disturbance passing through a medium is called a pulse.
Therefore, the passage of a wave through a medium is known as transmission.
To learn more about the Transmission of the wave, refer to the link:
https://brainly.com/question/27844842
#SPJ6