What is the energy of a photon emitted with a wavelength of 448 nm?

The arrangement that orders the n-alkanes from lowest to highest boiling point is:

C8 < C9 < C10 < C11 < C12 < C14 < C16 < C18 < C20

Order the boiling point of n-alkanes of n-alkanes from lowest to highest boiling point is: Methane < Ethane < Propane < Butane < Pentane < Hexane < Heptane < Octane < Nonane < Decane.

The boiling point of n-alkanes increases with increasing molecular weight and surface area. Therefore, the correct order of n-alkanes from lowest to highest boiling point is:

Methane < Ethane < Propane < Butane < Pentane < Hexane < Heptane < Octane < Nonane < Decane

This order is based on the assumption that all the n-alkanes are at standard conditions (1 atm and 25°C). However, it's important to note that deviations from this trend can occur due to factors such as branching, cyclic structures, and functional groups.

Learn more about The boiling point: brainly.com/question/40140

#SPJ11

The minimum value of 'a' for liquid-liquid equilibrium (LLE) in the binary liquid mixture is determined by the given excess Gibbs free energy equation ge/RT = ax1x2(x1 2x2).

Liquid-liquid equilibrium (LLE) occurs when two immiscible liquid phases coexist in thermodynamic equilibrium.

In the given binary liquid mixture, the excess Gibbs free energy (ge) is described by the equation ge/RT = ax1x2(x1 2x2), where x1 and x2 represent the mole fractions of the two components in the mixture.

To achieve liquid-liquid equilibrium, we need to determine the minimum value of 'a' that satisfies this equation.

To find the minimum 'a' value, we can set the equation equal to zero, as at the LLE condition, the excess Gibbs free energy reaches its minimum value. Solving for 'a' will give us the critical value needed for liquid-liquid equilibrium.

Learn more about equilibrium

brainly.com/question/15629887

#SPJ11

The percent composition by mass of phosphorus in phosphoric acid (H₃PO₄) is approximately 31.63%. To determine the percent composition by mass of phosphorus in phosphoric acid (H₃PO₄) we have to follow some steps.

1. Calculate the molar mass of phosphoric acid (H₃PO₄).
  - Hydrogen (H) has a molar mass of 1 g/mol
  - Phosphorus (P) has a molar mass of 31 g/mol
  - Oxygen (O) has a molar mass of 16 g/mol
  H₃PO₄ molar mass = (3 × 1) + (1 × 31) + (4 × 16) = 3 + 31 + 64 = 98 g/mol
2. Determine the mass of phosphorus in one mole of phosphoric acid.
  There is 1 phosphorus atom in H₃PO₄, so its mass is 31 g/mol.
3. Calculate the percent composition of phosphorus in phosphoric acid.
  Percent composition = (mass of phosphorus / molar mass of H₃PO₄) × 100
  Percent composition = (31 g/mol / 98 g/mol) × 100 ≈ 31.63%
The percent composition by mass of phosphorus in phosphoric acid (H₃PO₄) is approximately 31.63%.

Learn more about mass at

brainly.com/question/19694949

#SPJ11

The protein lysozyme will likely aggregate when the pH of the solution is significantly away from its isoelectric point (pI) of 11.0. When the pH of the solution is either below or above the pI, the protein's charge will be different from its isoelectric charge, leading to reduced solubility and increased propensity for aggregation.

At a pH lower than the pI (acidic conditions), the lysozyme will carry a net positive charge due to the excess of protons, leading to electrostatic repulsion between protein molecules. This repulsion prevents aggregation. However, as the pH moves closer to the pI, the net charge decreases, reducing the repulsion forces and increasing the likelihood of aggregation.

Similarly, at a pH higher than the pI (alkaline conditions), the lysozyme will carry a net negative charge due to deprotonation. Again, the electrostatic repulsion between protein molecules prevents aggregation. But as the pH moves closer to the pI, the net charge decreases, diminishing repulsion and increasing the chances of aggregation.

Therefore, the pH at which lysozyme is most likely to aggregate will be around the isoelectric point of 11.0, where the net charge is close to zero.

Learn more about protein aggregation and isoelectric point here:

https://brainly.com/question/29449193?referrer=searchResults

#SPJ11

The molar solubility of Na3PO4 in a saturated solution where [Na+] = 0.30 M is 1.0 x 10^-26 M.

The molar solubility of Na3PO4 can be determined using the solubility product constant (Ksp) expression for the dissociation reaction of Na3PO4:
Na3PO4(s) ⇌ 3Na+(aq) + PO43-(aq)
Ksp = [Na+]^3[PO43-]
Since the solution is saturated, the concentration of Na+ is given as 0.30 M. Therefore, we can substitute this value into the Ksp expression and solve for the molar solubility (x) of Na3PO4:
Ksp = (0.30 M)^3 (x)
Simplifying the expression, we get:
Ksp = 0.027x
Rearranging the equation, we can solve for x:
x = Ksp / 0.027
The value of Ksp for Na3PO4 is 2.7 x 10^-28 (at 25°C), so substituting this value into the equation gives:
x = (2.7 x 10^-28) / 0.027
x = 1.0 x 10^-26 M
Therefore, the molar solubility of Na3PO4 in a saturated solution where [Na+] = 0.30 M is 1.0 x 10^-26 M.

learn  more about solution

https://brainly.com/question/1024087

#SPJ11

Two or more elements can chemically combine to form a compound through a chemical reaction. The elements lose their individual properties and form a new substance with a unique set of physical and chemical properties.

In a compound, the constituent elements are held together by chemical bonds, which can be covalent, ionic, or metallic. Covalent compounds share electrons between atoms, while ionic compounds form through the transfer of electrons from one atom to another, resulting in positively and negatively charged ions that attract each other. Metallic compounds involve a sea of electrons shared between metal atoms. The composition of a compound is fixed and can only be separated by chemical means, as opposed to mixtures, which can be separated physically.

Learn more about elements can chemically here

https://brainly.com/question/9249660

#SPJ11

To calculate the mass defect of the nucleus in amu, we need to first calculate the total rest mass of the protons and neutrons that make up the nucleus. The He nucleus has 2 protons and 2 neutrons.

Total rest mass of the protons = 2 x 1.0072764666 u = 2.0145529332 u
Total rest mass of the neutrons = 2 x 1.0086649158 u = 2.0173298316 u

Total rest mass of the protons and neutrons = 2.0145529332 u + 2.0173298316 u = 4.0318827648 u

However, the actual rest mass of the He nucleus is 4.002602 u. Therefore, the mass defect is:

Mass defect = (Total rest mass of protons and neutrons) - (Actual rest mass of He nucleus)
Mass defect = 4.0318827648 u - 4.002602 u = 0.0292807648 u

Rounded to four decimal places, the mass defect of the nucleus is 0.0293 u or 0.029281 amu.

Therefore, the correct answer is option 1: 0.029281 u.

To calculate the mass defect of the He nucleus in amu, you need to first find the total mass of its protons and neutrons, and then subtract the mass of the He nucleus.

Here's the step-by-step explanation:

1. Determine the number of protons and neutrons in the He nucleus. Helium (He) has 2 protons and 2 neutrons.
2. Calculate the total mass of protons: 2 protons × 1.0072764666 u/proton = 2.0145529332 u.
3. Calculate the total mass of neutrons: 2 neutrons × 1.0086649158 u/neutron = 2.0173298316 u.
4. Add the total masses of protons and neutrons: 2.0145529332 u + 2.0173298316 u = 4.0318827648 u.
5. Subtract the mass of the He nucleus from the total mass: 4.0318827648 u - 4.002602 u = 0.0292807648 u.

The mass defect of the nucleus in amu is approximately 0.029281 u, which corresponds to option 1.

To know more about Mass visit:

https://brainly.com/question/19694949

#SPJ11

To calculate the value of AG' at 298 K, we need to use the equation: AG' = AH' - TAS'.                                                                            

First, we need to convert the values given to kJ/molcan. AH298 = -92.2 kJ/molrani x (1 mol/2 molcan) = -46.1 kJ/molcan.
AS298 = -198.8 J/(molznK) x (1 kJ/1000 J) x (1 mol/2 molcan) = -0.0994 kJ/(molcanK). Therefore, AG' = -46.1 kJ/molcan - (298 K x (-0.0994 kJ/(molcanK))) = -46.1 kJ/molcan + 29.64 kJ/molcan = -16.46 kJ/molcan. Thus, the value of AG' at 298 K is -16.46 kJ/molcan.
The reaction of N2(g) and H2(g) to form NH3(g) can be analyzed using the Gibbs free energy equation, which is ΔG = ΔH - TΔS. To maximize the yield of NH3(g), we need to calculate ΔG' at 298 K.
Therefore, the value of ΔG' at 298 K is -32.9 kJ/mol.

Learn more about NH3 here:
https://brainly.com/question/30214340

#SPJ11

Hydrogen bonding between the carbonyl group of an amino acid on one strand with the amino group of the neighboring strand is  A) parallel B-pleated sheets and B) antiparallel B-pleated sheets

A key interaction that contributes to the formation of secondary structures in proteins. These secondary structures include parallel B-pleated sheets and antiparallel B-pleated sheets. In parallel B-pleated sheets, adjacent strands run in the same direction, and the hydrogen bonds between carbonyl and amino groups are nearly perpendicular to the strands.

In antiparallel B-pleated sheets, adjacent strands run in opposite directions, and the hydrogen bonds between carbonyl and amino groups are nearly parallel to the strands. The interactions between these groups also contribute to the formation of other secondary structures, such as a-helices and B-helices, but the question specifically asks about B-pleated sheets. Therefore, the correct answer is either A or B, depending on the directionality of the adjacent strands.

Learn more about hydrogen bonds at

https://brainly.com/question/24634138

#SPJ11

The geometry of the complex ion[tex][Co(H_2O)^4I_2][/tex] is octahedral. This is because the Co atom has 6 coordinate bonds (4 from the water molecules and 2 from the Iodine atoms).

A bond is a debt security, in which the issuer (usually a corporation or government) promises to pay a fixed amount of interest over a specified period of time, and to repay the principal amount of the loan at maturity. Bonds are commonly used by companies, municipalities, states, and sovereign governments to finance a variety of projects and activities. The interest paid on bonds is usually fixed, and the bond issuer typically pays out the interest semiannually. Bond prices are determined by the amount of interest the bond pays, the length of time until maturity, and the creditworthiness of the issuer.

Its valence electronic configuration is 3d7, which allows it to form 6 coordinate bonds. The octahedral geometry is the most stable geometry for this complex ion because it allows the Co atom to achieve a complete octet of electrons, which results in lower energy for the system.

To learn more about bonds

https://brainly.com/question/29282058

#SPJ4

The value of Ecell is found by Ecell = Ecell - (0.0592/n) * log(Q)     and the value of g is found by ΔG = -n * F * Ecell

To determine the values of Ecell (cell potential) and ΔG (Gibbs free energy) at 25°C for a redox reaction with n = 2 and k = 0.075, we need the standard cell potential (E°cell) for the reaction.

The relationship between Ecell and E°cell is given by the Nernst equation:

[tex]Ecell = Ecell - (0.0592/n) * log(Q)[/tex]

where Q is the reaction quotient and is calculated using the concentrations of the reactants and products.

Since the problem does not provide specific information about the redox reaction or its concentrations, we cannot determine the exact values of Ecell and ΔG. The given values of n = 2 and k = 0.075 are not sufficient for the calculations.

To find Ecell and ΔG, you would need to know the balanced equation for the redox reaction and the concentrations of the species involved in the reaction. With this information, you can calculate Q and use the Nernst equation to determine Ecell. The Gibbs free energy change (ΔG) can be calculated using the equation:

ΔG = -n * F * Ecell

where F is Faraday's constant (approximately 96,485 C/mol).

To learn more about Ecell, visit

brainly.com/question/32323743

#SPJ11

The half-reaction that takes place at the cathode is: O₂(g) + 4 H+(aq) + 4 e− → 2 H₂O(ℓ). Oxidation Is Loss, Reduction Is Gain". In an oxidation-reduction (redox) reaction, one species undergoes oxidation while another undergoes reduction.

Oxidation and reduction are chemical processes that involve the transfer of electrons between reactant species. Oxidation refers to the loss of electrons by a reactant species, resulting in an increase in its oxidation state. Reduction, on the other hand, refers to the gain of electrons by a reactant species, resulting in a decrease in its oxidation state.

Learn more about Oxidation and reduction: https://brainly.com/question/13699873

#SPJ11

The Mass defect of 85Ga is 14.375005 and the binding energy of an atom of 85Ga is approximately  148.781302 per atom.

1. Calculate the total mass of protons and neutrons in the nucleus:

- 85 Ga has 31 protons and 39 neutrons (39-31 = 8).

- Mass of protons: 31 ×1.007825 amu = 31.242 amu

- Mass of neutrons: 39× 1.008665 amu = 39.34 amu

- Total mass of protons and neutrons: 31.242 amu + 39.34 amu = 70.582 amu

2. Calculate the mass defect (difference between total mass and the actual mass of the atom):

- Mass defect: 84.957005 amu- 70.582 amu=14.375005

3. Convert the mass defect to energy using Einstein's mass-energy equivalence equation (E = mc²):

- 1 amu is approximately equivalent to 931.5 MeV.

- Binding energy:14.375005 amu × 931.5 MeV/amu ≈ 13390.3172 MeV

4. Calculate the binding energy per nucleon (atom):

- Binding energy per atom:13390.3172 MeV / 90 ≈ 148.781302 MeV

To know more about binding energy here

https://brainly.com/question/31960382

#SPJ4

The mass-volume percentage of the solution in which doctor adds 4mL of water to 6g of a powdered aspirin is 120%

To solve the problem, we need to calculate the mass of the aspirin in the final solution and then divide it by the volume of the solution and multiply by 100 to get the mass-volume percentage.

First, we need to calculate the mass of the aspirin in the solution. Since the doctor added 4 mL of water to 6 g of aspirin, the total mass of the solution is 6 g + 4 g = 10 g.

We can assume that the volume of the aspirin is negligible compared to the volume of the solution, so the total volume of the solution is 5 mL. The mass of the aspirin in the solution can be calculated using the following formula:

mass of aspirin = total mass of solution - mass of water

mass of aspirin = 10 g - 4 g

mass of aspirin = 6g

Now we can calculate the mass-volume percentage of the solution:

mass-volume percentage = (mass of aspirin ÷ volume of solution) x 100

mass-volume percentage = (6 g ÷ 5 mL) x 100

mass-volume percentage = 120%

Therefore, the correct answer is Option (d) 120%.

for more questions on mass-volume percentage of a solution: https://brainly.com/question/30509154

#SPJ11

Without the specific phase diagram and compositions, it's impossible to provide a numerical value for the activity of Pb for the tangent.

To determine the activity of Pb in systems with given compositions at 200°C using the common tangent construction, follow these steps:

1. Obtain a phase diagram: First, find a Pb-rich phase diagram that includes temperature (T) and composition (X) axes. Make sure the diagram has data for 200°C.

2. Locate the compositions: Identify the compositions given in the question on the phase diagram. For example, if you are given compositions X1 and X2, find those points on the diagram.

3. Draw the common tangent: Draw a tangent line that touches both of the curves corresponding to the compositions X1 and X2 at 200°C. This common tangent line represents the equilibrium state between the two phases at the given temperature.

4. Identify the point of tangency: Locate the point where the tangent line touches the curve for the composition X1. This point represents the equilibrium composition of Pb in that phase.

5. Determine the activity of Pb: Based on the equilibrium composition at the point of tangency, calculate the activity of Pb using the given activity-composition relationship or activity coefficient model (e.g., Raoult's Law or Henry's Law).

Without the specific phase diagram and compositions, it's impossible to provide a numerical value for the activity of Pb. However, these steps should guide you in solving the problem using the common tangent construction method.

Learn more about tangent here:

https://brainly.com/question/24595178

#SPJ11

The electron geometry of the SnF62- ion is octahedral, since there are six electron pairs around the Sn atom. The molecular geometry is also octahedral, since the F atoms are all equivalent and are arranged in an octahedral shape around the central Sn atom.

First, we determine the total number of valence electrons in the ion. Sn has a valence of 4, while each F atom has a valence of 7. There are six F atoms in the ion, so the total number of valence electrons is:
4 + 6 x 7 + 2 (for the -2 charge) = 50
Next, we arrange the atoms around the central Sn atom to minimize repulsion between the electron pairs. We can see that the six F atoms will arrange themselves in an octahedral shape around the Sn atom. This means that there will be six electron pairs around the Sn atom, including four bonding pairs (one between Sn and each F atom) and two lone pairs on the Sn atom itself.

To draw the Lewis structure, we start by placing the Sn atom in the center and connecting it to each F atom with a single bond. This accounts for four of the valence electrons. Next, we place the remaining 34 electrons around the atoms to satisfy the octet rule. Each F atom has a full octet, so we can distribute the remaining electrons around the Sn atom to give it a full octet as well. We can do this by placing a lone pair on each of the two axial positions of the octahedron, and three lone pairs in the equatorial plane. The final structure looks like this:

                  F
                  |
                  F
               /     \
          F       Sn       F
               \     /
                  F
                  |
                  F

To know more about electron geometry visit:-

https://brainly.com/question/7558603

#SPJ11

The binding energy per mole of nucleons for chlorine-35 and chlorine-37 is 7.1178 x 10^12 J/mol and 7.0667 x 10^12 J/mol, respectively.

The binding energy per mole of nucleons can be calculated using the formula:

Binding energy per mole of nucleons = [Z(mp + me) + N(mn)]c^2 / A

where Z is the atomic number, N is the neutron number, mp is the mass of a proton, me is the mass of an electron, mn is the mass of a neutron, c is the speed of light, and A is the mass number (A = Z + N).

For chlorine-35, Z = 17, N = 18, A = 35, mp = 1.00783 g/mol, me = 0.00055 g/mol, and mn = 1.00867 g/mol. Substituting these values into the formula gives:

Binding energy per mole of nucleons for chlorine-35 = [17(1.00783 + 0.00055) + 18(1.00867)]c^2 / 35

= 7.1178 x 10^12 J/mol

For chlorine-37, Z = 17, N = 20, A = 37, and using the same values for mp, me, and mn, we get:

Binding energy per mole of nucleons for chlorine-37 = [17(1.00783 + 0.00055) + 20(1.00867)]c^2 / 37

= 7.0667 x 10^12 J/mol

Learn more about binding energy

brainly.com/question/31817434

#SPJ11

Answer: Neither or none

Explanation: Less dense means closely compacted in substance and all of these objects are hollow.

The approximate freezing point of the 0.500 m C6H12O6 aqueous solution is -0.93 °C.

The approximate freezing point of a 0.500 m C6H12O6 (glucose) aqueous solution can be calculated using the freezing point depression formula:.

ΔTf = Kf × m × i

Here, ΔTf represents the freezing point depression, Kf is the cryoscopic constant for water (1.86 °C/m), m is the molality of the solution (0.500 m), and i is the van't Hoff factor, which indicates the number of particles the solute dissociates into. Since glucose (C6H12O6) is a non-electrolyte and does not dissociate in water, i equals 1.

Using the given values, we can calculate the freezing point depression:

ΔTf = 1.86 °C/m × 0.500 m × 1

ΔTf = 0.93 °C

The normal freezing point of water is 0 °C. To find the new freezing point of the solution, subtract the freezing point depression from the normal freezing point:

New freezing point = 0 °C - 0.93 °C

New freezing point ≈ -0.93 °C

Therefore, the approximate freezing point of the 0.500 m C6H12O6 aqueous solution is -0.93 °C.

Know more about Freezing point depression here:

https://brainly.com/question/31357864

#SPJ11

The order of increasing polarity of the given bonds is: 2 (H-H) < 1 (C-H) < 3 (O-H) < 4 (F-H).

Electronegativity is the measure of an atom's ability to attract electrons towards itself in a covalent bond. The higher the electronegativity difference between two atoms, the more polar the bond.

In the given set of bonds, hydrogen is bonded to different elements (carbon, oxygen, and fluorine) and also to another hydrogen atom. Among these, the H-H bond has the least polarity as both atoms have the same electronegativity.

The C-H bond has a slightly higher polarity than H-H as carbon is more electronegative than hydrogen.

The O-H bond is more polar than C-H as oxygen is significantly more electronegative than carbon.

Finally, the F-H bond has the highest polarity as fluorine is the most electronegative element among those listed.

Thus, the order of increasing polarity is 2 (H-H) < 1 (C-H) < 3 (O-H) < 4 (F-H).

To know more about Electronegativity refer here:

https://brainly.com/question/17762711#

#SPJ11

Complete Question:

Based on periodic trends in electronegativity, arrange the bonds in order of increasing polarity. least polar 1 : C−H 2 iं H−H 3 # O−H 4 if F−H most polar

A. H₂O(l) → H₂O(g) Prediction: Increase in entropy.

When water changes from liquid to gas, its entropy increases because the gas state has more freedom of motion than the liquid state. The water molecules are more spread out and have higher disorder in the gas phase.

B. NH₃(g) + HCl(g) → NH₄Cl(s) Prediction: Increase in entropy.

The reaction produces a solid product, NH₄Cl, which has lower entropy than the reactants in the gas phase. However, the entropy change of the gas phase molecules is much larger than the decrease in entropy due to the formation of the solid. Therefore, the overall change in entropy is positive.

C. C₁₂H₂₂O₁₁(s) → C₁₂H₂₂O₁₁(aq) Prediction: No significant change in entropy.

When sugar dissolves in water, the disorder of the sugar molecules increases because they are more spread out in solution. However, the water molecules also become more ordered around the dissolved sugar molecules, which offsets the increase in sugar entropy. The overall change in entropy is therefore not significant.

D. 2 H₂(g) + O₂(g) → 2 H₂O(g) Prediction: Increase in entropy.

The reactants are gases, and the products are also gases. The number of molecules increases from 3 to 4 in this reaction, resulting in an increase in entropy. Additionally, the gas molecules are more disordered than the reactant molecules.

To know more about entropy refer here:

https://brainly.com/question/22145368#

#SPJ11

To prepare a 130 mL of a 1.6% agarose gel for gel electrophoresis, you would need 2.08 grams of agarose. Option b is correct

A molecular biology technique called electrophoresis is used to separate biomolecules based on their mass and electrical charges.

A molecular biology technique called electrophoresis allows biomolecules like DNA or proteins to be separated based on their electrical charges and weight. For instance, DNA migrates to the positive pole when subjected to an electrophoretic field due to its negative charge, and distinct DNA molecules may also be distinguished by the weight of their base pairs.

To sum up, the technique of electrophoresis is employed in molecular biology labs to separate biomolecules based on their mass and electrical charges.

tiny size DNA is moved by gel electrophoresis across a matrix of molecules that blocks larger molecules from migrating but allows smaller ones to do so. This enables the size separation of molecules.

Learn more about electrophoresis here

https://brainly.com/question/28709201

#SPJ11

The complete question is

How much agarose, in grams, would you need to prepare a 130 mL of a 1.6% agarose gel for gel electrophoresis?

a. 1.3 g b.  2.08 g c. 1.6 g d. 20.8

Three electrons are transferred between copper and aluminum when the reaction is balanced.

In the balanced redox reaction between copper and aluminum, copper is oxidized to copper(II) ions, while aluminum is reduced to aluminum ions. The balanced chemical equation for this reaction is:

3Cu + 2AlCl₃ → 3CuCl₂ + 2Al

In this reaction, copper loses three electrons to form copper(II) ions, while aluminum gains three electrons to form aluminum ions. Therefore, three electrons are transferred between copper and aluminum in this reaction.

The transfer of electrons between atoms in a chemical reaction is referred to as a redox reaction, which involves the oxidation and reduction of the species involved. Oxidation refers to the loss of electrons, while reduction refers to the gain of electrons. The number of electrons transferred in a redox reaction can be determined by balancing the chemical equation for the reaction.

learn more about redox reaction here:

https://brainly.com/question/2671074

#SPJ11

The Ksp expression for the given equilibrium is [Cu+][Cl-].

The Ksp expression represents the equilibrium constant for the dissolution of a sparingly soluble salt. In this case, the equilibrium involves the dissolution of CuCl solid, resulting in the formation of Cu+ and Cl- ions in aqueous solution.

The Ksp expression is derived from the balanced equation and indicates the product of the ion concentrations raised to their respective stoichiometric coefficients.

For this equilibrium, the Ksp expression is written as [Cu+][Cl-], representing the concentration of Cu+ ions multiplied by the concentration of Cl- ions.

This expression allows us to quantitatively describe the extent of the dissolution process and the solubility of CuCl in solution.

Learn more about equilibrium

brainly.com/question/30694482

#SPJ11

The concentration of hydronium ions in the solution with a pH of 4.8 is approximately 1.58 × 10⁻⁵M.

The pH of a solution is defined as the logarithm of the reciprocal of the hydrogen ion concentration  [H+] of the given solution.

It is expressed as:

pH = -log[ H⁺ ]

Given that; the pH of a solution pH = 4.8

Hydronium ion concentration OH⁻ = ?

Plug the given values into the above formula and solve for the  concentration of hydronium ions in the solution.

pH = -log[ H⁺ ]

[tex][ H^+] = 10^{(-pH)}[/tex]

Plug in pH = 4.8

[tex][ H^+] = 10^{(-4.8)}[/tex]

[ H⁺] = 1.58 × 10⁻⁵M

Therefore, the  concentration of hydronium ions is 1.58 × 10⁻⁵M.

Learn more about pH & pOH here: brainly.com/question/17144456

#SPJ1

IF4: Seesaw, bond angles 90 and 120; CO2: Linear, bond angles 180, KRF4: Square planar, bond angle 90, XeF2: linear, bond angle 80, BrF5: Square pyramidal, bond angles 90 and 120, PF5: Trigonal bipyramidal: Bond angles 90 and 120 in case of molecular structure.

IF4: The molecular structure of IF4 is seesaw (trigonal bipyramidal with one lone pair), with bond angles of approximately 90° and 120°. The molecule is polar due to the lone pair of electrons on the central atom, resulting in a dipole moment.

CO2: The molecular structure of CO2 is linear, with bond angles of 180°. The molecule is nonpolar due to the symmetrical arrangement of the two polar bonds, resulting in a zero dipole moment.

KRF4: The molecular structure of KRF4 is square planar, with bond angles of 90°. The molecule is nonpolar due to the symmetrical arrangement of the four polar bonds, resulting in a zero dipole moment.

XeF2: The molecular structure of XeF2 is linear, with bond angles of 180°. The molecule is polar due to the lone pair of electrons on the central atom, resulting in a dipole moment.

BrF5: The molecular structure of BrF5 is square pyramidal, with bond angles of approximately 90° and 120°. The molecule is polar due to the asymmetrical arrangement of the five polar bonds, resulting in a dipole moment.

PF5: The molecular structure of PF5 is trigonal bipyramidal, with bond angles of approximately 90° and 120°. The molecule is polar due to the asymmetrical arrangement of the five polar bonds, resulting in a dipole moment.

Learn more about molecular structure here:

https://brainly.com/question/29857692

#SPJ11

The percent composition of Vitamin E (C₂₉H₅₀ O₂) is:

Carbon: 80.81%

Hydrogen: 11.73%

Oxygen: 7.46%

To calculate the percent composition of Vitamin E (C₂₉ H₅₀ O₂), we need to find the total molar mass of the compound and the molar mass of each element present in it.

The molar mass of C29H50O2 can be calculated as:

(29 x 12.01 g/mol) + (50 x 1.01 g/mol) + (2 x 16.00 g/mol) = 430.72 g/mol

To calculate the percent composition of each element, we need to divide the molar mass of each element by the total molar mass and multiply by 100%.

The molar mass of carbon (C) inC₂₉ H₅₀ O₂ is:

29 x 12.01 g/mol = 348.29 g/mol

The percent composition of carbon is:

(348.29 g/mol / 430.72 g/mol) x 100% = 80.81%

The molar mass of hydrogen (H) in C₂₉ H₅₀ O₂ is:

50 x 1.01 g/mol = 50.50 g/mol

The percent composition of hydrogen is:

(50.50 g/mol / 430.72 g/mol) x 100% = 11.73%

The molar mass of oxygen (O) in C₂₉ H₅₀ O₂ is:

2 x 16.00 g/mol = 32.00 g/mol

The percent composition of oxygen is:

(32.00 g/mol / 430.72 g/mol) x 100% = 7.46%

Learn more about  composition

brainly.com/question/5217462

#SPJ11

The hydrogen atom circled in the molecule with the most stable conjugate base will be the most acidic.

In organic chemistry, acidity is determined by the stability of the resulting conjugate base. The more stable the conjugate base, the more acidic the hydrogen atom. Stability can be influenced by factors such as resonance, electronegativity, and inductive effects.

When comparing the circled hydrogen atoms, we need to consider the stability of the corresponding conjugate bases. If one hydrogen atom is part of a molecule with a more stable conjugate base, it will be more acidic. Factors such as resonance and electron delocalization can enhance stability.

To identify the most acidic hydrogen atom, we should analyze the molecular structure and any potential resonance effects. Additionally, we can consider the electron-withdrawing or electron-donating groups present near the circled hydrogen atoms, as these can influence the acidity. Ultimately, the hydrogen atom in the molecule with the most stable conjugate base, due to resonance or other stabilizing effects, will be the most acidic.

Learn more about conjugate base here:

https://brainly.com/question/30086613

#SPJ11

The two double bonds are drawn between the carbon at the 1-position and the adjacent carbons, which both have a negative charge. This structure shows that the positive charge is delocalized throughout the ring, making the carbocation more stable.

Resonance structures are important in determining the stability of carbocations. To complete the resonance structure drawn, we need to add one curved arrow to show the movement of an electron pair that results in the positive charge moving to the 1-position of the ring. This movement of electrons creates a new bond between the carbon at the 1-position and the adjacent carbon, which now has a positive charge.
To complete the resonance structure, we need to draw two double bonds that have a positive charge at the 1-position of the ring.
Overall, resonance structures are important in stabilizing carbocations by spreading out the positive charge throughout the molecule. By completing the resonance structure with two double bonds that have a positive charge at the 1-position of the ring, we can see the importance of delocalization of charge in creating a more stable carbocation.

to know more about resonance structure visit

brainly.com/question/23287285

#SPJ11