What is the importance of audio or sound in media forms such as film and television?

It also assumes that many of your portrait are in focus. A wide aperture setup admits so much light into to the lens and lessens the depth of field.

A cameras is a piece of equipment that takes pictures and comprises of either a plate or light-sensitive film inside of a light-proof casing. The camera's shutters opens and closes during the taking of a picture, exposed the photosensitive film to sight and recording the scene on the film.

The traditional camera depicted in the illustration has been largely replaced by digital cameras and mobile phones today.

Less light enters the lens through a tiny aperture. Additionally, it suggests that more your photo will be sharp. More light enters the lens when the aperture is wide open, but the field of view is also reduced. You can change the aperture setting to help balance overall exposure and control the amount of the composition is already in focus.

To learn more about camera follow the given link:

brainly.com/question/7825772

#SPJ4

Answer:

359cm

Explanation:

The change in length of the cord due to a stretching force of 0.5N is given by Hooke's law:

ΔL = k * ΔF

Where ΔL is the change in length, k is the spring constant and ΔF is the change in force.

Since the spring constant for the cord is 3N/cm, the change in length due to a stretching force of 0.5N is:

ΔL = (3N/cm) * (0.5N) = 1.5 cm

Since the cord is already 350cm long, the total length of the cord when the stretching force is 0.5N is 350cm + 1.5cm = 351.5cm.

To find the length of the cord when the stretching force is 2.5N, we can use the same formula:

ΔL = (3N/cm) * (2.5N) = 7.5 cm

The total length of the cord when the stretching force is 2.5N is therefore 351.5cm + 7.5cm = 359cm.

Answer:

9000N

Explanation:

gravitational field strength of earth is approximately 10N/kg .

900kg×10N/kg

=9000N

A temperature increase of an order of 81 will cause an object's thermal output radiated per unit surface area to double, assuming that its emissivity is unaltered by the temperature change.

To know more about Temperature here

https://brainly.com/question/24746268

#SPJ4

Here initial speed u=0m/s    final speed v=26.5 m/s and acceleration due to gravity g=9.81 m/s^2

Where:

m = mass of the object (kg)

g = acceleration due to gravity (9.8 m/s^2)

h = height of the cliff (m)

We know the velocity of the object just before it hits the ground, which is 26.5 m/s. We can use this velocity to calculate the kinetic energy of the object just before it hits the ground.

KE = (1/2)mv^2

As the object is dropped from the cliff, its initial potential energy is converted to kinetic energy. Therefore, the initial potential energy is equal to the final kinetic energy.

GPE = KE

mgh = (1/2)mv^2

We can solve for h by rearranging the equation and substituting the known values for GPE, KE, m, and g.

Simply multiply the acceleration of gravity by the period of time since the object was released to determine the object's speed (or velocity). In other words, velocity is equal to -9.81 m/s2 * time, or V = gt. The item is just traveling downwards when there is a negative sign.

to know more about cliff height here:

brainly.com/question/10726356

#SPJ4

The value of d is 401.550.

Momentum can be viewed as a body's "power" while it is moving, or the amount of force it can exert on another body. For instance, a baseball (small mass) thrown quickly can have the same momentum as a bowling ball (big mass) going extremely slowly (low velocity) (high velocity).

"The motion of an item equal to the product of its mass and its velocity" is referred to as momentum. When we say anything has momentum, we are referring to its precise mass and direction of motion.

C+ΣMA = ( 200 cos 45) (d cos 30+0-3) -

(200 sin 45°) (d sin 30°)= -120

(200COS 45°) (0.3) + (200 cos 45°) (d cos30) +

(200sin 45') (d sin 30") = 120

d = 120- (200 cos 45) (0.3) / 200 (cos 45 Cos 30+ sin 45 sin 30)

d = 0.40155m

d = 401.55mm

d = 401.550

To learn more about momentum from given link

https://brainly.com/question/18798405

#SPJ4

Complete Question -

Explanation:

This intense stretching method uses bouncing movements to push your body beyond its normal range of motion. Whereas static stretches are performed slowly and gradually, the ballistic method stretches muscles much farther and faster. You can do many of the same stretches as ballistic or static stretches.

Ranking each of the following from least to greatest in terms of the amount of momentum each possesses:

A 5 kg object moving at -25 m/s < A 100N object moving at 5 m/s < A 10kg object moving at 10 m/s < A 30 kg moving at 5 m/s

Momentum is the product of a particle's mass and velocity. The fact that momentum is a vector quantity means that it has both magnitude and direction. The force pushing a particle has an equal-and-opposite impact on the speed at which its momentum changes, according to Isaac Newton's second law of motion. Take a look at Newton's laws of motion.

Newton's second law states that if a particle experiences a constant force for a predetermined period of time, the impulse—which is equal to the force multiplied by the duration—will equal the change in momentum. The amount of time required for a consistent force to bring a particle to rest, in contrast, is measured by a particle's momentum.

We know that momentum, p = mv

Where,

p = momentum

m = mass

v = velocity

Substituting the value in formula we get,

1. A 10kg object moving at 10 m/s

p = 10 × 10

  = 100 kg⋅m/s

2. A 30 kg moving at 5 m/s

p = 30 × 5

  = 150 kg⋅m/s

3.  A 5 kg object moving at -25 m/s

p = 5 × -25

  = -125 kg⋅m/s

4. A 100N object moving at 5 m/s

p = (100 × 0.10197 kg) × 5

  = 10.197  × 5

  = 50.985 kg⋅m/s

Learn more about Momentum

https://brainly.com/question/24030570

#SPJ4

"Scientific evidence for warming of the climate system is unequivocal."

Organisms such as diatoms, forams, and coral) can obey useful climate proxies. Other proxies involve ice cores climate, tree rings, and sediment cores. Chemical deputy records include isotope ratios, elemental examination, biomarkers, and biogenic silica.

Climate analyzers use every possible direct and indirect compilation to study the full history of Earth's climate, ice cores drawn from Greenland, Antarctica, and tropical mountain glaciers appear that Earth's climate greets to changes in greenhouse gas levels.

So we can conclude that Climate change is most usually measured using the average surface temperature of the planet.

Learn more about the climate here: https://brainly.com/question/17922964

#SPJ1

The resistance of the filament which carries the current of 2 A and has a potential difference of 10 V is b) 5 ohms

The current passing through the filament = 2A

The potential difference in the filament = 10 V

The resistance of the filament can be found using the formula,

                  R = V/I

where R is the resistance of the filament

           V is the potential difference between the filament

           I is the current passing through the filament

Let us substitute the known values in the above equation, we get

               R = 10 / 2

                  = 5 ohms

Therefore, the resistance of the filament is 5 ohms

Learn more about the resistance in

https://brainly.com/question/29427458

#SPJ4

Since torque is directly proportional to body mass, while the lever arm remains fixed and the mass of the stone grows, so does the torque.

Lever:

Lever is a type of simple machine composed of a stiff beam and a fulcrum. The fulcrum is the point on which the beam pivots. The effort and load are delivered to either end of the beam. A load is applied to the opposite end of a lever when force is applied to the one end.

The three classes of levers are first, second, and third class levers.

The fulcrum of superior levers is positioned between the weight and the effort.

Levers of inferior quality with weight between the fulcrum and the effort

Third-class levers need effort between movements fulcrum and load.

For such more question on Lever.

https://brainly.com/question/416386

#SPJ4

The tension is the only force exerted horizontally to the car.And according to Newton's Law, F = ma = 1210kg * 1.20m/s = 1452N.So T =1452N.

It just seems slick, almost like touching ice but without the frigid sensation, according to my firsthand experience of both. Sorry, it's really nothing exceptional. Any surface would be sufficient if it had some lubrication oil on it.

In reality, there are no frictionless planes. If they did exist, items on them would almost certainly behave exactly as Galileo predicted if they did. Despite not existing, they are extremely valuable for designing things like engines, motors, roads, and even tow truck beds, to mention a few.

To know more about frictionless surfaces visit:

brainly.com/question/434969

#SPJ4

Stage and film versions of a drama are similar in that the audience must use context clues such as lighting, sound effects, and dialogue to infer the mood of a scene. This requires the audience to pay attention to the details of the performance, as subtle changes in these elements can drastically change the overall tone of the production.

The main difference between a stage and film version of a drama is that a stage production relies heavily on the physicality of the actors and their interactions with one another, while a film production relies heavily on the technical aspects such as camera angles, lighting, and sound design. Additionally, a stage production is performed live in front of an audience, while a film is created in a studio and viewed later by an audience.

Learn more about film versions:

https://brainly.com/question/20500638

#SPJ4

Mass doesn't affect change in temperature

Simply put, mass is the quantity of material that is present. As a result, since there will always be the same amount of matter present, changing the temperature has no direct impact on mass.

A substance's temperature is a gauge for determining how hot or cold it is. It serves as a gauge for typical kinetic energy. The molecules of the substance move very swiftly at high temperatures. The molecules move very slowly when the temperature is low.

A thermometer is used to measure temperature, however there are numerous other sorts of units that can represent temperature. Fahrenheit, Celsius, and Kelvin are the most widely used units. Heat and temperature are two different concepts that shouldn't be confounded. Heat, as opposed to temperature, is a type of energy and is quantified in Joules.

Learn more about temperature at https://brainly.com/question/28631483

#SPJ4

Answer:

W = m g = 80 kg * 9.80 m/s^2 = 784 N    using g = 9.80 m/s^2

W' = (W - .8 W) 80 = .2 W  = 157 N

W' = 80 kg * g' = 157 N    where g' is the reduced field

g' = 1.96 m / s^2

the scale's readout if indeed the elevator is decelerating faster than 160 lb .

Your perceived weight is equal to the normal force.Therefore, whenever the elevator accelerates or upwards downward, you truly feel tiny bit heavier than normal and a little lighter than usual.

Any jump you make would only slow the lift's descent to the ground by a very small amount.Even though you could jump perfectly timed and with all the force your legs could produce, it would be pointless.Your greatest option, as opposed to jumping, is to fold down.

to know more about elevator visit:

https://brainly.com/question/29477960

#SPJ4

The required net force on the car with certain mass and travelling with deceleration is said to be 5000 N.

Given that,

Mass of the car m = 1000 kg

Velocity of the car v = 20 m/s

Time t = 4 sec

Net force on the car = ?

According to Newton's second law of motion, it is said mathematically that, F = m a ---(1)

Acceleration a can be written as the rate of velocity.

a = (v-u)/t = (0 - 20)/4 = - 5 m/s² ---(2)

Substituting (2) in (1) we have,

F = m a = 1000 × - 5 = -5000 kg m/s² or -5000 N

Thus, the required net force on the car is 5000 N.

To know more about force:

https://brainly.com/question/1005491

#SPJ4

The truck bed and the crate's static coefficient of friction, assuming the crate doesn't slide, is 0.400.

Between the truck bed and the crate, there is 0.64 coefficient of static friction. When the bed is in the position depicted, the truck must move quickly to the right in order to make the crate slide.

The resistive friction force (Fr) divided by the normal or perpendicular pushing force (N) yields the coefficient of friction, which is a numerical value. The formula fr = Fr/N is used to represent it.

To know more about static friction visit:-

https://brainly.com/question/13000653

#SPJ4

Answer:

R = 1.5 to the northeast

C = .5 to the west

B = C + R       adding vectors head to tail

Vector B will be straight north or directly across the river

B = (1.5^2 - .5^2)^1/2

B = 2^1/2 = 1.41

Adding the vectors as described shows that if the rower rows at 1.5 m/s in a northeasterly direction and the river carries the boat downstream at .5 m/s the net speed of the boat is 1.41 m/s straight north

The ball accelerates at a constant rate as it moves down the slope because of the constant gravitational force acting on it in a major portion and the rolling tangential force on the object is acting in the smaller form.

Rolling motion of any object occurs when the object starts sliding in a different methods from the other objects such as when the objects starts to roll from the ramp or any other sloppy surface and it rolls down due to the gravitational force and with many other forces such as the rolling tangential force. many forces are acting on the object at the same moment and we are just seeing the gravitational force which is playing a major portion. Hence by this information we can consider that the ball accelerates at a constant rate as it moves down the slope because of the constant gravitational force acting on it in a major portion and the rolling tangential force on the object is acting in the smaller form.

Learn more about Rolling motion:

brainly.com/question/29568301

#SPJ4

Gamma: 4

Infrared: 1

X-Ray: 3

Visible Light: 2

Infrared has the longest wavelength between the four options, meaning that it has the lowest frequency. Since the longer the frequency, the lower the frequency. While the shorter the wavelength, the higher the frequency.

The portions of the electromagnetic spectrum are called from greatest to lowest energy: gamma rays, X-rays, ultraviolet radiation, visible light, infrared radiation, and radio waves. Microwaves (such as those used in microwave ovens) are a subset of the electromagnetic spectrum's radio wave segment.

Next would be visible light since it has the second longest wavelength out of the given options. Then it would be X-Ray. And finally Gamma since it has the shortest wavelength.

Learn more about to electromagnetic

https://brainly.com/question/17057080

#SPJ4

A cyclic process is a thermodynamic process where the initial and final states are identical. As a result, both the system's initial and end internal energies are constant. As a result, the system's capacity to absorb heat is determined by the work it performs during a cycle.

A thermodynamic process is one that modifies the system's thermodynamic state. A transition from an initial to a final state of thermodynamic equilibrium characterizes a change in a system. The actual course of the process is not the main focus in classical thermodynamics and is frequently disregarded.

There are several different types of thermodynamic processes, such as (a) isothermal, in which the system's temperature stays constant; (b) adiabatic, in which no heat is exchanged; (c) isobaric, in which the system's pressure stays constant; and (d) isochoric, in which the system's volume stays constant.

To learn more about Thermodynamic process from given link

https://brainly.com/question/30101601

#SPJ4

The ball accelerates at a constant rate as it moves down the slope because of the constant gravitational force acting on it in a major portion and the rolling tangential force on the object is acting in the smaller form.

Rolling motion of any object occurs when the object starts sliding in a different methods from the other objects such as when the objects starts to roll from the ramp or any other sloppy surface and it rolls down due to the gravitational force and with many other forces such as the rolling tangential force. many forces are acting on the object at the same moment and we are just seeing the gravitational force which is playing a major portion. Hence by this information we can consider that the ball accelerates at a constant rate as it moves down the slope because of the constant gravitational force acting on it in a major portion and the rolling tangential force on the object is acting in the smaller form.

Learn more about Rolling motion:

brainly.com/question/29568301

#SPJ4

The electric field in the region r ≤a is E [tex]= - \frac{r}{4\pi a^3} . \frac{Q}{e_0} r[/tex]

The total charge is enclosed within the Gaussian surface.

Q[tex]_{enc}[/tex] = 2Q - Q = Q

Therefore, applying Gauss's law over the Gaussian surface

∫[tex]_{s}[/tex]E.dS = Q[tex]_{enc}[/tex]/ε₀ ⇒ E.4πr² = Q/ε₀ ⇒ E = Q/4πε₀r²(r)

In question solution:

A[tex]_{sphere}[/tex] = 4πr²

ΦE = ∫E⋅dA

ΦE = q/ε₀

  E = q/(A⋅ε₀)

  E = q/(4πr²ε₀)

for r≤a, qin = -Q

               E [tex]= - \frac{r}{4\pi a^3} . \frac{Q}{e_0} r[/tex]

So, the electric field in the region is   E [tex]= - \frac{r}{4\pi a^3} . \frac{Q}{e_0} r[/tex]

Your question is incomplete but most probably your full question was:

A uniformly charged ball of radius a and charge −Q is at the center of a hollow metal shell with inner radius b and outer radius c. The hollow sphere has a net charge of +2Q.

Part A: Determine the electric field strength in the region r ≤a. Give your answer as a multiple of Q/E0. Express your answer in terms of some or all of the variables a, b, c, r, and the constant π.

Learn more about Gauss's law at https://brainly.com/question/14773637.

#SPJ4

According to the question, you would need to add a 40 µF capacitor in order to produce a total capacitance of 50 µF.

What is the capacitor?

An electrical component known as a capacitor stores energy in an electric field. It is made up of two metal plates separated by an insulator, such as air, paper, plastic, or ceramic. When a voltage is applied to the plates, a charge is stored in the electric field. This charge can then be released when the voltage is removed. Capacitors are used in a variety of applications, such as providing energy storage in power supplies, filtering signals in electronic circuits, and providing energy to motors in electrical devices. They can also be used to balance out electrical loads in a circuit, and provide a steady current for the circuit. Capacitors can vary in size, shape, and material depending on the application.

In this case, 90 µF + 40 µF = 130 µF, and 130 µF - 90 µF = 40 µF. Therefore, you would need to add a 40 µF capacitor to the 90 µF capacitor to achieve a total capacitance of 50 µF.

To learn more about capacitor

https://brainly.com/question/13578522

#SPJ4

Calculate the angle between the vector connecting the force's application point and the pivot point and the direction of the applied force. You may calculate the torque by multiplying r by F and sin.

The force that can cause an object to revolve around an axis is measured in torque. Torque accelerates an object in an angular direction, much like force does in linear kinematics.

An angular force known as a torque tends to produce rotation along an axis, which could be the center of mass or a fixed point. Torque can also be thought of as a thing's capacity in order to overcome turning resistance, such as a shaft or a gear, that is rotating.

To know more about torque visit:-

https://brainly.com/question/14970645

#SPJ4

The ECG waveform has many components such as segments,  waves, and intervals; when these components differ from the expected forms, this indicates dysrhythmia.

An abnormal or irregular heartbeat is referred to as cardiac dysrhythmia. Your heart may beat too slowly or too fastly if you have dysrhythmia. Or your heart's rhythm may be disturbed, giving you the sensation that your heart missed a beat.

Thus, when the ECG waveform is different than normally it is expected, it shows a sign of dysrhythmia. When a person experiences dysrhythmia, and the rate of their heartbeat becomes irregular but still, it lies within the normal range.

You can learn more about dysrhythmia at

https://brainly.com/question/28198574

#SPJ4

Seasonal changes impact the environment. is There are only two factors that affect your environment.

Seasonal affective disorder, a clinically diagnosed syndrome, is believed to represent the morbid extreme of a spectrum of seasonality. Two types of seasonality have been clinically described: one characterized by a winter pattern and a second by a summer pattern of depressive mood disturbance.

Seasonality is a characteristic of a time series in which the data experiences regular and predictable changes that recur every calendar year. Any predictable fluctuation or pattern that recurs or repeats over a one-year period is said to be seasonal.

To know more about spectrum visit

https://brainly.com/question/6836691

#SPJ1

The Cessna Cardinal, a single-engine light plane, has a wing area of 16.2 m² and an aspect ratio of 7.31 with span efficiency factor of 0.62 then the induced drag when the total weight is 9800 N is 18.8 N.

Given that,

Wing area (A) = 16.2m²

Aspect ratio (r) = 7.31

Efficiency factor (e) = 0.62

Weight of plane (W) = 9800 N

Velocity of airplane (v) = 251 km/h = 251× 5/18 = 69.72 m/s

We know,

Dynamic pressure (p) = 1/2ρv²

where ρ is density of plane = 1.225

p = 1/2 × 1.225 × 69.72 × 69.72 = 2977.29 pa

Lift coefficient Cl = W/p × A = W/(1/2ρv²) A

where, A is the area of wing

Cl = 9800/2977.29 × 16.2 = 0.203

Induced drag coefficient (Cd) = Cl²/πer² = (0.203 × 0.203)/(π × 0.62 × 7.31 × 7.31) = 0.041/(104.08) = 0.39×10⁻³

Induced drag (d) = p × A × Cd = 2977.29 × 16.2 × 0.39 × 10⁻³ = 18.8 N.

To know more about drag:

https://brainly.com/question/30024162

#SPJ4

The flux of light from an isotropic source depend on the distance r from the source by  r-2.

What is isotropic source?

An isotropic source is a source of radiation or sound that emits energy in all directions equally. This type of source is usually assumed to have uniform power density in all directions, making it a simplifying assumption when analyzing a system. Examples include a point source in free space, such as a light bulb, or a sound source in a room.

The flux of light from an isotropic source (a source that radiates uniformly in all directions) decreases as the inverse square of the distance from the source. This means that the flux of light from the source decreases according to the equation F = 1/r2, where F is the flux of light, and r is the distance from the source. Therefore, the flux of light from an isotropic source decreases with the distance r from the source according to the equation F = r-2.

To learn more about isotropic source

https://brainly.com/question/23543764

#SPJ4