A telescope's resolving power may be determined using the following formula: Resolving power is calculated as 11.25 seconds of arc/d, where d is the centimeter-based diameter of the objective.
What should a telescope's resolving power be?For small telescopes, the resolving power is often calculated using the Dawes limit: = 4.56/D, where is the resolving power in arcseconds and D is the aperture in inches. A 3-inch telescope, for instance, should have a resolving power of around 1.5", but an 8-inch telescope has a resolving power of roughly 0.57".
The pupil of your eye and the apertures of telescopes and cameras are examples of circular apertures that fall under the 1.22 factor. Diffraction sets a resolution limit on the amount of light that may travel through an aperture of diameter D.
learn more about resolving power
https://brainly.com/question/30432649
#SPJ4
how much is kg in gigapascal?
1 kgf/in² is equal to 6.89475729 × 10^-3 GPa. Here kgf/in² is the Imperial unit of pressure and GPa is the unit of pressure in the International System of Units (SI).
Kilogram-force per square inch (kgf/in²) and gigapascal (GPa) are units of pressure that have a place with various estimation frameworks. Be that as it may, it is feasible to change over between them utilizing a transformation factor.
1 kgf/in² is equivalent to 6.89475729 × [tex]10^(-3)[/tex]GPa.
In this manner, to change over a tension worth from kgf/in² to GPa, you can duplicate the worth by 6.89475729 × 10^-3. On the other hand, to change over a tension worth from GPa to kgf/in², you can separate the worth by this transformation factor.
For instance, in the event that you have a tension of 100 kgf/in², you can change it over completely to GPa as follows:
100 kgf/in² * 6.89475729 ×[tex]10^-3[/tex] GPa/kgf/in² = 0.689475729 GPa
Likewise, on the off chance that you have a tension of 2 GPa, you can change it over completely to kgf/in² as follows:
2 GPa/6.89475729 × 10^-3 GPa/kgf/in² = 290077.6509 kgf/in²
To learn more about units of pressure, refer:
https://brainly.com/question/18690776
#SPJ4
The complete question is:
how much kg force per square in gigapascal?
A car can accelerate from rest to a speed of 28 m/s in 20 s. What is the average acceleration of the car
The acceleration is 1.4 m/s^2
What is acceleration?Acceleration is the rate at which an object's velocity changes over time. In other words, it is the change in velocity per unit time.
We call this;
a = v - u/t
a = 28 - 0/20
a = 1.4 m/s^2
Acceleration can be positive, negative or zero. A positive acceleration means the velocity of an object is increasing, a negative acceleration means the velocity of an object is decreasing and zero acceleration means the velocity of an object is constant (not changing). The unit of acceleration is meters per second squared (m/s^2).
Learn more about acceleration:https://brainly.com/question/12550364
#SPJ1
an electron beam is aimed at two closely spaced slits. the beam is attenuated to produce only 1 electron per minute.
When an electron beam is aimed at two closely spaced slits, the electrons passing through the slits will interfere with each other, producing an interference pattern on a screen behind the slits. The interference pattern will be a series of bright and dark bands, where the bright bands correspond to constructive interference and the dark bands correspond to destructive interference.
When a beam of electrons is passed through two closely spaced slits, it creates an interference pattern on a screen behind the slits. This pattern results from the wave-like behavior of electrons and the interference between the electrons passing through the two slits. The pattern appears as a series of bright and dark bands, where the position and intensity of the bands are determined by the relative phase of the electrons.
The interference pattern only becomes noticeable with a large number of electrons passing through the slits at the same time. If only one electron is passing through the slits per minute, the pattern will not be easily observable.
"
Complete question
Indicate the result of this experiment:
an electron beam is aimed at two closely spaced slits. the beam is attenuated to produce only 1 electron per minute.
"
You can learn more about electron beam at
https://brainly.com/question/9976626
#SPJ4
The fact that we always see the same face of the Moon tells us that (a) the Moon does not rotate. (b) the Moon's rotation period is the same as its orbital period. (c) the Moon looks the same on both sides.
The fact that we always see the same face of the Moon tells us that (b) the Moon's rotation period is the same as its orbital period.
What do you call it when everyone's face looks the same?Every face appears to be identical to every other face. Face blindness, or prosopagnosia, is the medical term for this condition.
Because the period of rotation of the moon on its axis is equal to the period of its revolution around the earth, we always see the same side of the moon, and this side always faces us.
The speed at which it rotates is the same for both rotations. Because of this same speed, one always sees the same side of the moon.
learn more about Moon's rotation
https://brainly.com/question/29488851
#SPJ4
Which of the following would NOT be considered proper safety equipment for an outdoor excursion?
The long sleeves and pants for places with rocks and thick forest growth
are not considered proper safety equipment for an outdoor excursion.
What are safety equipments ?When we are planning for a journey, we must bring the safety equipments with us especially if we are going to a mountain or watery areas.
Life jackets, jackets for cold etc. must be there during a boat travel, or travel through colder regions. Similarly seat belts for car travel and helmet for biking is necessary.
It is good to avoid long skirts or sleeves during biking to avoid any hanging anywhere. Long sleeves are not considered as a safety equipment anywhere.
Find more on safety equipment:
https://brainly.com/question/14848384
#SPJ9
The options of your question include:
A. helmet for biking
B .long sleeves and pants for places with rocks and thick forest growth
C. bathing suit for water activities
D. a compass or GPS device
what is equation for molality?
Molality (m) is a measure of the concentration of a solute in a solution, and is defined as the number of moles of solute per kilogram of solvent.
The equation for molality is:
m = moles of solute / mass of solvent in kg
Concentration is the ability to focus one's attention and mental effort on a specific task or activity. It involves filtering out distractions and staying attentive to the task at hand. The level of concentration can vary depending on the person, the task, and the environment.
Concentration is an important aspect of productivity and can help individuals achieve their goals more efficiently. A lack of concentration can lead to procrastination, errors, and reduced performance. There are many techniques that can help improve concentration, such as creating a quiet and organized workspace, breaking tasks into smaller manageable parts, taking breaks, and avoiding multitasking. Additionally, engaging in activities that promote mindfulness, such as meditation and yoga, can also improve concentration.
To learn more about Concentration visit here:
brainly.com/question/30259556
#SPJ4
Why is titanium non-magnetic?
Titanium is a non-magnetic metal because of its digital configuration and crystal shape.
In its pure shape, titanium has a hexagonal near-packed (hcp) crystal structure, this means that that its atoms are organized in a specific pattern in the crystal lattice.
This association outcomes inside the absence of unpaired electrons that could create magnetic moments, making it non-magnetic. Moreover, the electron configuration of titanium does not permit for magnetic moments to shape.
Titanium has four valence electrons, which are positioned within the 3-d and 4s orbitals.
The electrons in the 3d orbital are paired, which means that they've opposite spins and cancel out any magnetic second that could be created by means of the electrons inside the 4s orbital.
But, whilst titanium is alloyed with other metals, inclusive of iron or nickel, it may turn out to be magnetic because of the magnetic houses of these metals.
This belongings is utilized in various programs, inclusive of in the manufacturing of plane and medical implants, where the non-magnetic houses of titanium are important to keep away from interference with electromagnetic gadgets.
Learn more about titanium:
https://brainly.com/question/8028003
#SPJ4
On a good day and with a strong tailwind, Mr. H's Yugo can average a speed of 24.7 m/h. Ignoring stop lights and other influences
that slow him down, how much time (in hours) does it take Mr. H to drive his Yugo the 11.9 miles down the two-lane highway to town?
Using the formula for time, which is distance divided by speed, it would take Mr. H approximately 0.48 hours to drive the 11.9 miles to town at a speed of 24.7 miles/hour, presuming a strong tailwind and no stops.
Explanation:To find the time it takes for Mr. H to drive to town, we can use the formula time = distance/speed. In this case, the distance is 11.9 miles and the speed is 24.7 miles/hour. Therefore, the time it would take Mr. H to drive to town is 11.9 miles / 24.7 miles/hour = 0.48 hours approximately. This means that on a day with a strong tailwind, and ignoring stop lights and other influences, it would take Mr. H about 0.48 hours to drive his Yugo the 11.9 miles to down the two-lane highway to town.
Learn more about Time Calculation here:https://brainly.com/question/34080240
#SPJ2
what type of electromagnetic wave is involved in communication?
a. Radio wave
b. infrared waves
c. ultraviolet waves
d. gamma rays
The type of electromagnetic wave that is primarily used in communication is radio waves, which have frequencies between about 3 kHz and 300 GHz.
Radio waves are used for various forms of communication, including radio and television broadcasting, cell phone and Wi-Fi communication, and satellite communication. They are preferred for communication because they can travel long distances through the atmosphere and can penetrate walls and other obstacles without significant attenuation. Infrared waves are also used in communication, primarily for short-range wireless communication such as in remote controls and some wireless headphones, but they have limited range compared to radio waves. Ultraviolet waves and gamma rays are not used for communication purposes as they have very high frequencies and can be harmful to living organisms.
To learn more about electromagnetic wave here:
https://brainly.com/question/3101711
#SPJ4
A man walking at 3. 56 m/s accelerates at 2. 50 m/s2 for 9. 28 s. How far does he get?.
The total distance traveled by the car when accelerating at a rate of 3. [tex]56 m/s^3[/tex] is 11.2 meters.
What is acceleration?Acceleration is the rate at which an object's velocity with respect to time changes. Acceleration is defined as a change in velocity over time. It is the pace at which the speed or direction of an item changes. It is determined using the formula a = (vf - vi)/t, where vf is the end velocity, vi is the beginning velocity, and t is the time period. Acceleration can be induced by a force such as gravity or by the motion of an item itself, such as when an automobile accelerates.
In the given question, the man will get a total distance of 40.1 meters.
This is calculated by using the equation d = v0t + 1/2[tex]at^{2}[/tex],
where v0 is the initial velocity (3.56 m/s), a is the acceleration (2.50 m/[tex]s^{2}[/tex]), and t is the time (9.28 s).
Plugging in these values, we get d = 3.56*9.28 + 0.5*2.50*[tex](9.28)^{2}[/tex] = 40.1 meters.
To know more about acceleration follow the link
brainly.com/question/29220990
#SPJ4
why do higher temperatures often result in greater precipitation
The higher temperatures often result in greater precipitation because warm air holds more water vapor.
A warmer planet means more precipitation will fall in regions of the world where water vapor is the factor that is currently limiting the amount of precipitation that occurs. This is the condition across a significant portion of the middle and upper latitudes across the Earth.
To put it simply, the amount of precipitation that falls is increasing as temperatures rise because warm air can carry more water vapor. A temperature increase of 1 degree Fahrenheit is equivalent to as much as a 4 percent increase in the amount of water vapor in the atmosphere. Other elements, such as El Nino and La Nina, may also play a role in the amount of rainfall.
To learn more about precipitation, click here:
https://brainly.com/question/18109776
#SPJ4
What is the derivative of acceleration?
The derivative of acceleration is also known as jolt or surge. Jolt is defined as the price of alternate acceleration with appreciation to time.
Mathematically, it can be expressed as the second derivative of position with respect to time, or the third derivative of distance with respect to time:
j(t) = a'(t) = d^2v(t)/dt^2 = d^3x(t)/dt^3
Acceleration is a fundamental concept in physics that describes how quickly an object changes its velocity. Velocity is a vector quantity that includes both speed and direction, while the acceleration is the rate of change of velocity with respect to time.
In other words, acceleration measures how much an object's speed or direction changes over time. If an object is moving in a straight line and its velocity is increasing, its acceleration is said to be positive. Conversely, if its velocity is decreasing, its acceleration is negative.
The standard unit of acceleration is meters per second squared (m/s^2). A positive acceleration of 1 m/s^2 means that an object is increasing its speed by 1 meter per second every second.
To learn more about Acceleration visit here:
brainly.com/question/29998386
#SPJ4
Which energy source contributes to the greatest emissions of gases in the environment during the energy production process?-bio fuels-fossil fuels-nuclear energy-solar energy
"The energy source that contributes to the greatest emissions of gases in the environment during the energy production process is fossil fuels." The correct option is B.
Fossil fuels, such as coal, oil, and natural gas, release large amounts of carbon dioxide (CO₂) and other pollutants into the atmosphere when burned for energy production. CO₂ is the primary greenhouse gas responsible for climate change and global warming. In addition, the extraction and transportation of fossil fuels also results in emissions of methane and other pollutants.
While nuclear energy (c) produces minimal emissions during energy production, the mining and processing of nuclear fuel can result in emissions of greenhouse gases.
Solar energy (d) and biofuels (a) are considered to be cleaner sources of energy, as they produce much lower emissions of greenhouse gases and other pollutants during energy production. However, the manufacturing and transportation of solar panels and biofuel crops can result in emissions of greenhouse gases.
Therefore, the energy source that contributes to the greatest emissions of gases in the environment during the energy production process is fossil fuels.
The given question is incomplete. The complete question is 'a. bio fuels
b. fossil fuels
c. nuclear energy
d. solar energy'
To know more about energy:
https://brainly.com/question/79954
#SPJ4
In which device do astronomers take advantage of chromatic aberration?
a. the prism b. the primary mirrors of reflecting telescopes
c. the primary lenses of reflecting telescopes
d. both b and c above e. all of the above
Astronomers take advantage of chromatic aberration in the prism. Therefore, the correct answer is option (a) the prism.
A prism is a triangular piece of glass or plastic that can split white light into its constituent colors by refracting the light at different angles as it passes through the prism. This effect is due to the different refractive indices of the prism material for different wavelengths of light, which causes the colors to separate.
Chromatic aberration is actually a type of distortion that can occur in lenses and mirrors, where different wavelengths of light are focused at different distances from the lens or mirror, resulting in color fringing around objects. However, astronomers typically try to minimize chromatic aberration in the lenses and mirrors of telescopes in order to achieve sharper and more accurate images.
Learn more about wavelengths of light here brainly.com/question/27557868
#SPJ4
A 0.22-caliber handgun fires a 28-g bullet at a velocity of 765 m/s. Calculate the de Broglie wavelength of the bullet. Is the wave nature of matter significant for bullets?
The de Broglie wavelength of the bullet 5.93 x 10^-35 m. For a bullet, the de Broglie wavelength is extremely small, and its wave-like behavior is not easily noticeable or significant. The behavior of a bullet is mostly described by its classical, particle-like properties.
The de Broglie wavelength of an object can be calculated using the formula:
λ = h / (mv)
where h is Planck's constant (6.63 x 10^-34 J s), m is the mass of the object (in kilograms), and v is the velocity of the object.
In this case, the mass of the bullet is 28 g = 0.028 kg, and its velocity is 765 m/s, so the de Broglie wavelength can be calculated as:
λ = (6.63 x 10^-34 J s) / (0.028 kg * 765 m/s) = 5.93 x 10^-35 m is the de Broglie wavelength of the bullet.
You can learn more about de Broglie wavelength at
https://brainly.com/question/15330461
#SPJ4
What determines colloid osmotic pressure?
Colloid osmotic pressure is determined by protein concentration gradient across blood vessel walls.
Colloid osmotic strain (COP) is a sort of osmotic tension not set in stone by the centralization of proteins in an answer. These proteins, regularly egg whites and globulin, are too huge to even consider going through the walls of veins, and thus, they stay in the plasma (the fluid piece of blood) and make a fixation slope across the vein walls. This fixation slope prompts a net development of water into the veins, which assists with keeping up with blood volume and forestall liquid collection in the tissues.
The COP of an answer is relative to the convergence of proteins in the arrangement, with higher centralizations of protein bringing about higher COP. COP is significant in various physiological cycles, including the guideline of circulatory strain, the support of liquid equilibrium, and the anticipation of edema (expanding brought about by liquid gathering in the tissues).
To learn more about colloid osmotic pressure, refer:
https://brainly.com/question/30639201
#SPJ4
A ferris wheel starts at rest and builds up to a final angular speed of 0. 70 rad/s while rotating through an angular displacement of 2. 5 rad. What is its average angular acceleration?.
According to the question: the average angular acceleration is 0.70/2.5 is 0.28 rad/s^2.
What is angular acceleration?Angular acceleration is the rate of change of angular velocity over time. It is the angular equivalent of linear acceleration, which is the rate of change of linear velocity over time. Angular acceleration is a vector quantity, having both magnitude and direction. It is usually denoted by the symbol alpha (α).
The average angular acceleration is equal to the change in angular velocity divided by the change in angular displacement. In this case, the change in angular velocity is 0.70 rad/s and the change in angular displacement is 2.5 rad.
Therefore, the average angular acceleration is 0.70/2.5 = 0.28 rad/s^2.
To learn more about angular acceleration
https://brainly.com/question/21278452
#SPJ4
How do you find the volume of the parallelepiped with adjacent edges pq,pr and ps where p(3,0,1),q(−1,2,5),r(5,1,−1) and s(0,4,2)?
The box product of the three vectors yields the volume of a parallelepiped with the vectors and and as its sides. Volume is equal to [a, b, c].
Describe a parallelepiped example.There are six square-shaped parallelepiped faces on the cube. Dice, ice cubes, Rubik's cubes, etc. are some examples. A face diagonal joins two vertices on the same face but not on the same edge. In this instance, the Face diagonal coincides with the Square diagonal.
Do parallelepipeds count as prisms?An object with parallelograms for faces is called a parallelepiped. Similar to a parallelepiped, a hexahedron with six parallelogram faces is a parallelepiped as well. A few examples of parallelepipeds are the cube, cuboid, and any rectangular prism.
To know more about Parallelepiped visit:
https://brainly.com/question/29140066
#SPJ4
Psychological perspectives exist:
A. to enforce one particular way of looking at problems.
O B. so that there can be different ways of looking at psychological
questions.
O
C. to address the physical properties of the brain.
D. to explain the science of behavior.
Psychological perspectives exist to explain the science of behavior, it deals with studying the science of cognitive behavior, hence option D is correct.
What are psychological perspectives?The five major psychological perspectives are biological, psychodynamic, behavioral, cognitive, and humanistic.
It generally suggests the behavior of humans both consciously and unconsciously and deals with the humans way of thinking and their behavior so it is the science of behavior.
Therefore, psychological perspectives are to explain the science of behavior.
Learn more about Psychology, here:
https://brainly.com/question/28398714
#SPJ9
You push a 3500 kg SUV with a constant 450 N of force and start it from rest. How much
horsepower are you applying when the SUV is going 1.5 m/s?
(Show work please)
The power that is applied is approximately 0.9 horsepower when the SUV is going at a velocty of 1.5 m/s.
What is horsepower?A horsepower is a unit of power that is commonly used to describe the power output of engines and motors.
One horsepower is equivalent to 746 Watts.
The power exerted on the SUV is calculated using the formula below:
P = F * v
where:
P is the power in Watts,F is the force in Newtons, andv is the velocity in m/s.Substituting the given values, we get:
Power = 450 N * 1.5 m/s
Power = 675 Watts
To convert this to horsepower, divide by 746:
675 W / 746 W/hp
Power = 0.9 horsepower
Learn more about horsepower at: https://brainly.com/question/28379812
#SPJ1
(a) Which one of the following properties most fundamentally distinguishes mechanical waves from electromagnetic waves? 0 Mechanical waves have crests and troughs. Mechanical waves require a medium for propagation. O Mechanical waves have well-defined wavelengths. © Mechanical waves move at a finite speed.
Option b. Mechanical waves require a medium for propagation. The most fundamental difference between mechanical waves and electromagnetic waves is that mechanical waves require a medium to propagate, whereas electromagnetic waves do not.
Mechanical waves, such as sound waves and water waves, require a material medium, such as air or water, to travel through. In contrast, electromagnetic waves, such as light and radio waves, can travel through a vacuum. While mechanical waves do have properties like crests and troughs, well-defined wavelengths, and finite speeds, these are not the most fundamental differences between the two types of waves. The requirement for a medium is what fundamentally distinguishes mechanical waves from electromagnetic waves.
Learn more about Mechanical waves here: brainly.com/question/24459019
#SPJ4
Complete question:
Which one of the following properties most fundamentally distinguishes mechanical waves from electromagnetic waves?
a. Mechanical waves have crests and troughs.
b. Mechanical waves require a medium for propagation.
c. Mechanical waves have well-defined wavelengths.
d. Mechanical waves move at a finite speed.
a car is being pushed 5 M with 15 N of force in 12 S
Answer:
To find the work done on the car, we can use the formula:
work = force x distance x cos(theta)
where force is the applied force, distance is the displacement, and theta is the angle between the force and displacement vectors (assuming the force is applied in the same direction as the displacement, theta is 0 and cos(theta) is 1).
In this case, the force is 15 N, the distance is 5 m, and theta is 0, so we can plug in the values and get:
work = 15 N x 5 m x 1
work = 75 J
Therefore, the work done on the car is 75 joules
What is the walking ghost phase of radiation?
The "walking ghost phase" of radiation is a term that refers to a short period of time after exposure to a high dose of ionizing radiation, during which the individual may appear to be unaffected by the exposure.
The term originated during the Manhattan Project, when scientists observed that individuals who had received a high dose of radiation would often feel relatively normal for a short period of time before experiencing severe symptoms. During the walking ghost phase, the individual may experience few or no symptoms of radiation exposure, even though their body is sustaining significant damage from the radiation. This is because the initial effects of radiation exposure are often delayed, and the damage to the body's cells and tissues takes time to manifest as symptoms. After the walking ghost phase, the individual may begin to experience symptoms such as nausea, vomiting, diarrhea, fever, and weakness. The severity and duration of these symptoms depend on the dose of radiation and other factors such as the individual's age, health, and medical treatment. It is important to note that the walking ghost phase is a term used primarily in historical contexts, as modern radiation exposure scenarios generally do not involve such high doses of radiation that would produce this effect. Nonetheless, it serves as a reminder of the dangers of ionizing radiation and the importance of taking measures to minimize exposure.
For such more questions on Radiation
https://brainly.com/question/1408043
#SPJ4
How are fireworks effects made?
Fireworks effects are made by combining various chemical compounds and powders in specific configurations to produce a wide range of colors, shapes, and patterns.
The specific ingredients and configurations used can vary depending on the desired effect, but some common techniques and ingredients used in making fireworks include:
Color production: Different metal salts are used to produce specific colors when they burn. For example, strontium produces red, copper produces blue, and barium produces green.
Sparkling effects: Aluminum or magnesium powder can be added to create sparkling or glittering effects.
Whistling or popping effects: Salts such as potassium benzoate or potassium oxalate can be used to create whistling or popping sounds.
Smoke effects: Chemicals such as titanium dioxide or zinc oxide can be used to produce smoke or haze effects.
Shaped charges: Fireworks can be shaped in various configurations to produce specific shapes or patterns, such as stars, flowers, or hearts.
To create a specific effect, the different chemicals and powders are carefully combined and packed into the firework's shell. The shell is then ignited, which ignites the chemicals inside and produces the desired effect.
Fireworks displays often involve a combination of different effects and colors, which are choreographed to music or other audio cues. The result is a dazzling and dynamic visual spectacle that is enjoyed by millions of people around the world for various celebrations and events.
For such more questions on Chemical Compounds
https://brainly.com/question/1194814
#SPJ4
The frictional force of air against a moving object. Causes object to slow down.
The frictional force of air against a moving object causes object to slow down is true.
What is frictional force?Frictional force is the force created when two surfaces come into contact as well as slide against each other. These forces are mostly influenced by the surface roughness and the amount of force required when they are combined. The amount of frictional force is affected by the angle and location of the item.
The forces of attraction, defined as adhesion, between both the points of contact areas of the surfaces, that are frequently minutely uneven, are the primary cause of friction between objects. The frictional force of air against a moving object causes object to slow down is true.
Therefore, the frictional force of air against a moving object causes object to slow down is true.
To learn more about frictional force, here:
https://brainly.com/question/19180015
#SPJ9
what are catastrophic events and how are they categorized?
Catastrophic events are large-scale disasters that disrupt the normal functioning of a community or region and cause extreme damage and loss of life. These events can be natural disasters such as earthquakes.
What is the disasters ?Disasters are events that cause significant damage, loss of life, and suffering to people and the environment. They come in many forms such as natural disasters like earthquakes, floods and hurricanes, or man-made disasters like oil spills and nuclear accidents. Disasters can have long-term effects on the environment, economy, and people’s lives, and can leave entire communities struggling to recover. Governments and organizations around the world work together to reduce the impacts of disasters and prepare for future events.
To learn more about disasters
https://brainly.com/question/27297706
#SPJ4
Catastrophic events are large-scale disasters that disrupt the normal functioning of a community or region and cause extreme damage and loss of life. These events can be natural disasters such as earthquakes.
What is the disasters ?Disasters are events that cause significant damage, loss of life, and suffering to people and the environment. They come in many forms such as natural disasters like earthquakes, floods and hurricanes, or man-made disasters like oil spills and nuclear accidents. Disasters can have long-term effects on the environment, economy, and people’s lives, and can leave entire communities struggling to recover. Governments and organizations around the world work together to reduce the impacts of disasters and prepare for future events.
To learn more about Catastrophic events
https://brainly.com/question/6840049
#SPJ4
How do you think you could change how much drag a paper plane has?
Answer: You can change many things ranging from the size and shape of the paper plane. Cutting slits into the plane allows the air to carry it further.
how is positive feedback supplied in a colpitts oscillator?
In a Colpitts oscillator, positive feedback is supplied by the capacitive divider formed by two capacitors connected in series between the collector and the emitter of the transistor.
What is the capacitors ?A capacitor is an electrical component that consists of two conductive plates separated by an insulating material known as a dielectric. The capacitor stores electrical energy in the form of an electrostatic field between the two plates. When a potential difference is applied between the plates, it creates an electric field which can store energy.
The output of the oscillator (the collector voltage) is fed back to the base of the transistor via the capacitive divider. As the collector voltage increases, the voltage across the two capacitors increases, which increases the base current of the transistor, further increasing the collector voltage and thus providing positive feedback.
To learn more about capacitors
https://brainly.com/question/27753307
#SPJ4
What is the work kinetic energy theorem formula?
The network executed on a particle equals the trade inside the particle's kinetic electricity: W internet = k B − k A.
Kinetic electricity is a form of energy that an object possesses by using distinctive features of its motion. It is defined as the energy that an object possesses due to its motion, and it is dependent on both the object's mass and velocity. The formula for kinetic energy is KE = 1/2mv^2, where m is the mass of the object and v is its velocity.
When an object is in motion, it has kinetic energy that can be transferred to other objects or converted into other forms of energy, such as potential energy or heat. For example, a moving car has kinetic energy that can be converted into potential energy as it climbs a hill, or into heat energy as its brakes are applied.
To learn more about Kinetic Energy visit here:
brainly.com/question/26472013
#SPJ4
Based on what you learned about light, select all of the correct statements from the following list.A)Light can act both as a wave and a particle.B)High frequency photons carry more energy than long wavelength photons.C)All electromagnetic waves travel at the speed of light.D)A photon is a particle of light.
"The correct statements from the following list regarding light are: Light can act both as a wave and a particle. High frequency photons carry more energy than long wavelength photons. All electromagnetic waves travel at the speed of light. A photon is a particle of light." Correct options are A, B, C, D.
Light shows both a particle and a wave characteristic depending on the position, according to the quantum mechanical wave-particle duality hypothesis. Diffraction, polarisation, and interference can be explained if the light is seen as a wave.
A photon's energy rises as its frequency does. In other words, as the wavelength increases, a photon loses energy. Any energy unit can be used to express photon energy.
We say that light travels in waves, and all electromagnetic radiation travels at the same speed which is about 3 × 10⁸ meters per second through a vacuum.
To know more about light:
https://brainly.com/question/30651536
#SPJ4