Robert A. Millikan able to determine, either from his own work, The mass of an electron. Hence, the correct option is (c).
Robert A. Millikan was able to determine the charge of an electron, but the discovery of the electron itself was made by J.J. Thomson. Millikan's work built on Thomson's discovery and helped to refine our understanding of the properties of electrons. By conducting the oil drop experiment, Millikan was able to measure the charge of an electron with great precision. He observed the motion of tiny oil droplets that were suspended in an electric field, and by measuring the strength of the electric field and the speed of the droplets, he was able to calculate the charge of each droplet. By adjusting the strength of the electric field, he was able to find the smallest possible charge that a droplet could have, which corresponded to the charge of a single electron. However, Millikan did not determine the mass of an electron, as this was already known from Thomson's work on the charge-to-mass ratio of electrons. Additionally, Millikan did not propose a model of an atom with a small, positively charged nucleus, as this idea was developed later by Ernest Rutherford.
To know more about electron please refer: https://brainly.com/question/15054861
#SPJ4
Why is molecular polarity important for life?
Molecular polarity is important for life because it plays a crucial role in many biological processes.
What is molecular polarity?Molecular polarity refers to the distribution of electrical charge within a molecule. It is a property that results from differences in the electronegativity of the atoms in a molecule.
Molecular polarity is important for life because many biological molecules, including proteins, DNA, and carbohydrates, are polar, meaning they have regions of positive and negative charge.
This allows them to interact with other polar molecules, such as water, through hydrogen bonding, which helps to stabilize their structures and maintain their functionalities.
More on molecular polarity can be found here: https://brainly.com/question/4248472
#SPJ1
after adding ethlyene glycol to the dissolved 3-nitrophthalic acid in step 1, what is the desired temperature for the reaction?
After adding ethlyene glycol to the dissolved 3-nitrophthalic acid the desired temperature for the reaction stays in room temperature.
Ethylene glycol, also defined as ethane-1,2-diol, the simplest member of the glycol family of organic compounds. Generally a glycol is defined as an alcohol with two hydroxyl groups on adjacent carbon atoms (a 1,2-diol). Basically, the common name ethylene glycol literally means “the glycol derived from ethylene.”
Generally, 3-Nitrophthalic acid is readily used as an intermediate during the synthesis of corrosion inhibitors, medicines and agrochemicals. 3-Nitrophthalic acid is readily available for the preparation of dyes, crop protection agents used during organic synthesis.
During the reactions of both of these chemicals the temperature remains at room temperature.
Learn more about 3-Nitrophthalic acid from the link given below.
https://brainly.com/question/20716309
#SPJ4
When using PCR to study DNA, primers attach to the exposed base pairs and begin to form double-stranded DNA. What stage of the process does this MOST accurately describe
The stage that this most accurately describes while using the PCR is the initiation of DNA synthesis, also known as the denaturation stage.
What occurs in the denaturation stage?In the denaturation stage of Polymerase Chain Reaction (PCR), the double-stranded DNA template is heated to a high temperature to separate the two complementary strands and create single-stranded DNA. The denaturation stage is the first step in the PCR cycle.
In this stage, the heat-stable DNA polymerase denatures the DNA and the primers anneal to the complementary single-stranded template. This marks the beginning of the extension stage, where the DNA polymerase synthesizes new complementary strands along the template DNA.
Learn more on denaturation stage here: https://brainly.com/question/27493294
#SPJ1
An open manometer is filled with mercury and
connected to a container of hydrogen. The
mercury level is 78.0 mm higher in the arm of the
tube connected to the air. Air pressure is
100.7 kPa. What is the pressure of the hydrogen in kilopascals?
Does anyone know what the container pressure would be? and how do I solve this?
Answer:
The pressure of the hydrogen in the container can be determined by using the equation:
P_H2 + ρgh = P_air
where P_H2 is the pressure of the hydrogen, ρ is the density of mercury (13,600 kg/m^3), g is the acceleration due to gravity (9.8 m/s^2), and h is the height difference between the mercury levels in the two arms of the manometer.
First, we need to convert the height difference from millimeters to meters:
h = 78.0 mm = 0.078 m
Next, we can substitute the given values into the equation:
P_H2 + (13,600 kg/m^3)(9.8 m/s^2)(0.078 m) = 100.7 kPa
Solving for P_H2, we get:
P_H2 = 100.7 kPa - (13,600 kg/m^3)(9.8 m/s^2)(0.078 m)
P_H2 = 99.0 kPa
Therefore, the pressure of the hydrogen in the container is 99.0 kPa
if red spheres represent oxygen atoms, blue spheres represent nitrogen atoms, and all the molecules are gases, (figure 1) figure1 of 1 there is a scheme of a chemical reaction. the reactants are two molecules that consist of two red atoms and four molecules that consist of one red and one blue atoms. the products are four molecules that consist of two red atoms and one blue atom. part a part complete write the formula for each of the reactants. express your answers as chemical formulas separated by a comma. no,o2 previous answers correct part b part complete write the formula for each of the products. express your answer as a chemical formula. no2 previous answers correct part c write a balanced equation for the reaction.
a) Reactants = 2NO, O₂ Products = 2NO₂ b) The balanced chemical equation is, 2NO + O₂ ---> 2NO₂. c) It is a combination reaction.
The Reactants in the reaction are 2NO, O₂ and products in the reaction is 2NO₂. The reaction is a combination reaction. Combination reactions can be exothermic or endothermic, depending on the specific reaction. Exothermic combination reactions release energy, usually in the form of heat or light, while endothermic combination reactions absorb energy.
The balanced chemical equation is, 2NO + O₂ ---> 2NO₂.
If we see the reaction 2NO + O₂ ---> 2NO₂ then we see that two molecules react and formed a single combined compound.
So it is combination reaction.
To know more about the combination reaction, here
brainly.com/question/3664113
#SPJ4
How many grams of HCI are needed to prepare .40 L of 1.5 M solution?
Answer: 21.90 grams HCl ; 22 g HCl if need correct sig figs
Explanation:
moles = M X L = 1.5 x .40 =0.60 moles HCl
convert to grams
0.60 X 36.5 = 21.90
NH3 is a stronger base than H20. Goal: Explain this observation using molecular orbitals. 1. Draw the molecular orbital diagrams for NH3 and H20 on the same energy scale. Appropriately label each MO with its type (0, 0*, nb, a, 1*) as well as with the atom(s) whose orbitals led to that MO.
The Establishment of the Molecular Orbitals of NH3. A molecule's electrical structure can be predicted using the Molecular Orbital Theory (MO).
What is meant by Molecular Orbital Theory?Simply put, according to the molecular orbital hypothesis, atoms tend to group together to create molecular orbitals. As a result of this arrangement, electrons can be found in a variety of atomic orbitals and are typically connected to numerous nuclei. In order to create the molecular orbital, the atomic orbitals combine. Similar to how the energy states of atomic orbitals are filled, the electrons of molecules fill the new molecular orbitals' energy levels.The work of Friedrich Hund, Robert Mulliken, John C. Slater, and John Lennard-Jones was crucial in the development of molecular orbital theory in the years after the establishment of valence bond theory (1927). The Hund-Mulliken theory was what MO theory was first known as.To learn more about Molecular Orbital Theory, refer to:
https://brainly.com/question/26388921
#SPJ4
On a T-v diagram, the saturated liquid states can be connected by a line called the _________ liquid line, and the saturated vapor states can be connected by the _________ vapor line.
A line known as the Saturated Liquid Line can be used to connect the saturated liquid states on a T-V diagram, while the Saturated Vapor Line can be used to connect the saturated vapor states.
What is Saturated Vapor Line?In the T-s diagram, the curve separating the two-phase state from the superheated vapor state is known as the saturation vapor curve. The T-s diagram's saturated liquid curve is the line dividing the subcooled liquid state from the two-phase state. The term "saturated liquid line" refers to a line that connects all saturated liquid states. The saturated vapor line connects all of the saturated vapor states. Both the saturated liquid state and the saturated vapor state combine into a single point on the T-v diagram when pressure reaches Pcr (critical pressure).The saturation line is the area beyond which a substance or component in a system either changes from liquid to vapor or vapor to liquid according to the Temperature Pressure Equilibrium Diagram.To learn more about Saturated Vapor Line, refer to:
https://brainly.com/question/18095323
#SPJ4
Which of the following is an experimental procedure used to study how attention affects the processing of competing stimuli?
A. Early selection
B. Filtering
C. Channeling
D. Dichotic listening
The experimental procedure used to study how attention affects the processing of competing stimuli would be dichotic listening.
What is dichotic listening?Dichotic listening is an experimental technique used to study selective attention in the auditory domain.
In a typical dichotic listening task, different sounds are presented simultaneously to both ears, with different stimuli presented to each ear. Participants are asked to attend to one ear (the "attended ear") and to ignore the other ear (the "unattended ear"), while listening to the sounds.
After the sounds have been presented, participants are typically asked to recall or identify the sounds presented to the attended ear. The task allows researchers to investigate the mechanisms underlying selective attention in the auditory system and to study factors that influence the selection and processing of auditory information.
More on dichotic listening can be found here: https://brainly.com/question/26815281
#SPJ1
FILL IN THE BLANK. The cations found in seawater originally came from ____, whereas the anions originated from ____.
The ions such as the cations found in seawater originally came from Earth's crust whereas the anions originated from Earth's mantle.
What are ions?An ion is defined as an atom or a molecule which has a net electrical charge. There are 2 types of ions :1) cation 2) anion . The cation is the positively charged ion and anion is the negatively charged ion . As they are oppositely charged they attract each resulting in the formation of ionic bond.
Ions consisting of single atom are mono-atomic ions while which consists of two or more ions are called as poly-atomic ions . They are created by chemical interactions .
Learn more about ions,here:
https://brainly.com/question/1447156
#SPJ1
Calculate the percent ionization of propionic acid (C2H5COOH) in solutions of each of the following concentrations (Ka is given in Appendix D in the textbooka) 0.250M .b 7.74×10−2M .c 2.03×10−2M .
The percent ionization for propionic acid in each of cases are given below:
Part A. 0.704%
Part B. 1.31%
Part C. 2.61 %
Percent ionization is defined as the quantity of a weak acid that ionizes in a solution expressed as a percentage.
Percent ionization can be calculated using the following expression.
α% = √(Ka/Ca) × 100%
where,
α% is the percent ionization.
Ka is the acid dissociation constant (1.34 × 10⁻⁵ for propionic acid).
Ca is the concentration of the acid.
For Part A. 0.250 M
α% = √(1.34 × 10⁻⁵/0.250) × 100% = 0.704%
Part B. 7.84 × 10⁻² M
α% = √(1.34 × 10⁻⁵/7.74 × 10⁻²) × 100% = 1.31 %
Part C. 1.97 × 10⁻² M
α% = √(1.34 × 10⁻⁵/2.03 × 10⁻²) × 100% = 2.61 %
Learn more about ionization from the link given below.
https://brainly.com/question/8907473
#SPJ4
he phase changes that occur when the temperature of co2 is increased from 190 k to 350 k at a constant pressure of 1 atm represents .target 1 of 4 the phase changes that occur when the temperature of co2 is increased from 190 k to 350 k at a constant pressure of 5.1 atm .target 2 of 4 the phase changes that occur when the temperature of co2 is increased from 190 k to 350 k at a constant pressure of 10 atm .target 3 of 4 the phase changes that occur when the temperature of co2 is increased from 190 k to 350 k at a constant pressure of 100 atm
If the temperature is raised while maintaining a constant pressure of 100 atm, CO2 will transition from a solid to a liquid, then from a liquid to a supercritical fluid, and lastly to a gas. This is the fourth of four targets.
What is the definition of temperature?Heat energy will logically go from a warmer (body with a high temp) to the a cooler (body with a low temp) according to temperature (one at a lower temperature). How cold or hot something is can be expressed numerically using the physiological concept of temperature. A thermometer is used to determine temperature. Thermometers were calibrated using various temperature scales that historically specified unique reference points & thermometric materials.
What is difference between heat and temperature?It is measured in joules. Heat will therefore serve as a gauge for the flow or movement of energy. You must be aware of the fact that an object will receive or lose heat but not have heat if you want to comprehend the distinction between heat and temperature. It can therefore be referred to as a measure of change. The concepts of temperature and heat are very dissimilar. a thermometer with Farenheit and Celsius scales. The average molecular kinetic energy of a substance is measured by its temperature. The temperature of something is a statement about how quickly the molecules are moving within that object.
Target 1 of 4 is the phase shifts that happen when CO2 is heated from 190 K to 350 K at a constant pressure of 1 atm. It is known as sublimation when CO2 changes its phase at 1 atm from a solid (dry ice) to a gas (carbon dioxide vapor) without going through the liquid phase.
CO2 will experience a separate set of phase shifts when subjected to pressures greater than 1 atm. CO2 will change its state from a solid to a liquid at 5.1 atm constant pressure, and then from a liquid to a gas when the temperature rises. This is the second of four targets.
When the temperature is raised, CO2 will transition from a solid to a liquid at a constant pressure of 10 atm, and then from a liquid to a supercritical fluid. This is the third of four targets.
To know more about Temperature visit:
https://brainly.com/question/12165495
#SPJ4
FILL IN THE BLANK. A stove that circulates heated air to uniformly cook food is an example of ________ heat transfer.
Answer: A stove that circulates heated air to uniformly cook food is an example of convection heat transfer.
select all that apply. a radioactive isotope, such as carbon-14, emits energy as which of the following?
A radioactive isotope, such as carbon-14, emits energy as rays and subatomic particles.
About Radioactive isotopeRadioactive isotopes, also known as radioisotopes, radionuclides, or radioactive nuclides, are any of several species of the same chemical element with different masses and unstable nuclei that work to dissipate excess energy by spontaneously emitting radiation in alpha, beta, and gamma forms .
More than 1,800 radioactive isotopes of various elements are known. Some of them are found in nature; the rest are produced artificially as direct products of nuclear reactions or indirectly as radioactive derivatives of these products.
Radioisotope ProductionThere are several sources of radioactive isotopes. Some radioactive isotopes are present as terrestrial radiation. The radioactive isotopes radium, thorium, and uranium, for example, are found naturally in rocks and soil. Uranium and thorium also occur in small amounts in water. Radon, which is produced by the radioactive decay of radium, is abundant in the air.
Other radioactive isotopes are produced by humans in nuclear reactions, which produce unstable combinations of neutrons and protons. One way to artificially induce nuclear transmutation is by bombarding stable isotopes with alpha particles.
Your question is incomplete but most probably your full question was:
Select all that apply. A radioactive isotope (ex. carbon 14) emits energy as which of the
following?
-Rays
-subatomic particles
-Heat
-light
Learn more about Radioactive isotope at
https://brainly.com/question/1907960
#SPJ4
The mass of the empty Erlenmeyer flask is 232.7 g. When filled with sodium chloride solution (density = 1.744 g/mL), the flask's mass is 428.6 g. What volume, in mL, of sodium chloride solution does the flask hold? Report the answer to one place after the decimal. Do not include the units.
The volume of the sodium chloride solution in the flask is 112.3 mL.
To find the volume of the sodium chloride solution in the Erlenmeyer flask, we first need to find the mass of the solution. We can do this by subtracting the mass of the empty flask from the mass of the filled flask:
Mass of solution = 428.6 g - 232.7 g = 195.9 g
Next, we can use the density of the solution to find the volume.
Density is defined as mass divided by volume, so we can rearrange the equation to solve for volume:
Volume = Mass / Density = 195.9 g / 1.744 g/mL = 112.3 mL
Finally, we can round our answer to one place after the decimal:
Volume = 112.3 mL ≈ 112.3 mL
So the volume of the sodium chloride solution in the flask is 112.3 mL.
To know more about volumes, refer here:
https://brainly.com/question/952755#
#SPJ11
I need to mark the steepest areas.
The hilltops and the steepest point of a slope are found in the highest and most closely-spaced contour lines on the map.
What are contour lines?Contour lines are lines on a map that connect points of equal elevation. Each contour line represents a specific elevation, and the spacing between contour lines represents the slope of the terrain.
The closer the contour lines are to each other, the steeper the slope. The hilltops are found where the contour lines form a closed circle or oval shape. The steepest point of a slope is found where the contour lines are closest together, indicating the highest rate of change in elevation.
Learn more about contour lines at: https://brainly.com/question/13088900
#SPJ1
If a compound is being consumed in a reaction, the rate constant for that compound is _______.
The rate of a reaction depends upon the concentration of the reactants. If a compound is being consumed in a reaction, the rate constant for that compound decreases.
What is rate constant?The rate constant or specific reaction rate of the reaction at a given temperature is defined as the rate of the reaction when the molar concentration of each of the reactants is unity.
The reaction rate is directly related to rate constant. The rate of a reaction decreases as the concentration of the reactants decreases with time. Here since the reactants are consumed, then the rate constant decreases.
Thus If a compound is being consumed, rate constant decreases.
To know more about rate constant, visit;
https://brainly.com/question/24658842
#SPJ1
HELP ASAP PLEASE ANSWER BOTH OF THESE QUESTIONS! I WILL GIVE YOU BRAINELIST IF YOU ANSWER IT!
Answer:
because it absorbs all colours expect for red,
Explanation: making the red light bounce into your eyes, therefore seeing the colour red
Question 2: The wave transfers its energy to the mineral, I think, thats my best guess
Give, and identify, the 1,2 and 1,4 products of the following reactions. for each circle the thermodynamic product.(3pts) O H-BrO CI2_CH2CI2O CH2 H-Br
Kinetic Versus Thermodynamic Control Furthermore of HBr to Dienes: 1,2-and 1,4-Addition
In the present post we'll talk about 1,2-and 1,4-Addition to dienes - specifically, the expansion of solid corrosive like HBr.
When a diene goes through response with a solid corrosive like HBr, protonation brings about a reverberation settled carbocation
The reverberation settled carbocation can go through assault at two potential positions.
At the point when the response is led at low temperatures, the response is irreversible and the significant item will be the one with the least energy change state, which is the carbon best ready to balance out certain charge.
This is alluded to as running the response under kinetic control.
At the point when the response is directed at higher temperatures, the response is reversible and the significant item will be the one which is generally thermodynamically steady, which is by and large the most-subbed alkene.
This is alluded to as running the response under thermodynamic control.
to know more about thermodynamic click here:
https://brainly.com/question/13059309
#SPJ4
What mass of ice (in g) can be melted if 24.9 kJ of thermal energy are added at the freezing point? Use molar mass = 18.02 g/mol
The answer is approximately 1332.75 g of ice can be melted if 24.9 kJ of thermal energy are added at the freezing point.
What is thermal energy?
Thermal energy refers to the energy contained within a system that is responsible for its temperature.
The heat required to melt a substance is equal to the enthalpy of fusion of that substance times its mass. The molar enthalpy of fusion of ice is 333.55 J/mol, so the amount of heat required to melt 1 mol of ice is 333.55 J.
To find the mass of ice that can be melted with 24.9 kJ of thermal energy, we first need to convert the energy from kJ to J:
24.9 kJ = 24.9 x 10^3 J = 24900 J
Next, we divide the amount of thermal energy by the molar enthalpy of fusion of ice to find the number of moles of ice that can be melted:
24900 J / 333.55 J/mol = 74.22 mol
Finally, we multiply the number of moles of ice by its molar mass to find the mass of ice in grams:
74.22 mol x 18.02 g/mol = 1332.75 g
Therefore, The answer is approximately 1332.75 g of ice can be melted if 24.9 kJ of thermal energy are added at the freezing point.
Learn more about thermal energy here: brainly.com/question/934320
#SPJ1
on a t-v diagram, the region under the dome area between the saturated liquid and saturated vapor lines is known as the ____ region.
saturated liquid vapor aka liquid-vapor mixture. A mixture of saturated vapor and liquid is present in this condition. The dryness fraction, a parameter that describes the characteristics of water in this phase, must be calculated is combined with the saturation characteristics.
What is vapor pressure?Vapor pressure is the pressure exerted by a vapor when it is in equilibrium with its liquid or solid phase at a given temperature. It is a measure of the tendency of a substance to evaporate and is a function of the temperature and the strength of the intermolecular forces between the molecules of the substance. At any given temperature, a substance will have a specific vapor pressure. When the vapor pressure of the substance is equal to the external pressure, the substance will begin to boil or evaporate. The vapor pressure of a substance increases with increasing temperature, as the average kinetic energy of the molecules increases and more molecules can escape from the liquid or solid phase and enter the gas phase.
To learn more about vapor pressure, click the link below ;
brainly.com/question/2693029
#SPJ4
Which is true for a diamagnetic salt?
a) It hag an odd number of filled orbitals,
b) It has an odd number of electrons.
c) It has no partially-filled orbitals.
d) It has an even number of filled orbitals.
e) It has at least partially-filled orbital.
Answer:
c) It has no partially-filled orbitals.
Explanation:
Diamagnetic salts are those that do not contain any partially-filled orbitals in their electronic configuration. This is because the electrons in these salts are paired and cancel each other's magnetic fields, making the compound diamagnetic. The number of electrons or the number of filled orbitals does not determine whether a salt is diamagnetic or not. Rather, it is the presence or absence of partially-filled orbitals that determines this property.
Researchers wanted to explore what psychological and social impact time spent watching TV and playing electronic games might have on children between the ages of five and seven. They included a representative sample of just over 11,000 children. When they were five and then again when they were seven, the children's mothers were asked to describe how well adjusted their offspring were, using a validated Strengths and Difficulties (SDQ) questionnaire. This experimental design best matches which category? A. Clinical Trial B. Population Survey C. Case-Control Study D. Cohort Study
The kind of study is a cohort study.
What is a Cohort study?A cohort study is a type of observational study in which a group of individuals (the cohort) with a common characteristic or experience are followed over a period of time to investigate the development of a particular health outcome or disease.
Cohort studies can be prospective (following the cohort from the present into the future) or retrospective (looking back in time to study past exposures and outcomes). They can be used to examine the incidence, prevalence, and risk factors of diseases, and are particularly useful for investigating rare exposures or outcomes.
Learn more about Cohort study:https://brainly.com/question/9429879
#SPJ1
A 2.540 g sample of an oxide of tin was heated in the air until the mass of the sample no longer
changed, and 2.842 g of tin (IV) oxide (SnO₂) was obtained as a result of the heating.
Work through the following questions. You only will be asked to submit your answers to some of
them, but you may need to calculate all of the answers a) - f) to determine the final answer g).
a) What is the mass percent of tin in SnO₂?
b) What is the mass of tin in the final sample?
c) What was the mass of tin in the original sample?
d) What was the mass of oxygen in the original sample?
e) What was the number of moles of tin in the original sample?
f) What was the number of moles of oxygen in the original sample?
g) What is the formula (SnxOy) of the original oxide of tin?
Answer:
A) The molar mass of SnO₂ is 150.71 g/mol (118.71 g/mol for Sn and 32 g/mol for O). The mass percent of tin in SnO₂ is (118.71 g/mol / 150.71 g/mol) × 100% = 78.76%.
B) The mass of tin in the final sample is 2.842 g.
C) Let x be the mass of tin in the original sample. The mass of oxygen in the original sample is (2.540 g - x). Since tin is oxidized to SnO₂, we can write the equation: Sn + O₂ → SnO₂. The molar ratio of Sn to SnO₂ is 1:1, so the number of moles of Sn in the original sample is the same as the number of moles of SnO₂ in the final sample. Using this, we can set up the following equation:
x / 118.71 g/mol = 2.842 g / 150.71 g/mol
Solving for x, we get x = 1.727 g.
Therefore, the mass of tin in the original sample is 1.727 g, and the mass of oxygen in the original sample is (2.540 g - 1.727 g) = 0.813 g.
D) The mass of oxygen in the original sample is 0.813 g.
E) The number of moles of tin in the original sample is 1.727 g / 118.71 g/mol = 0.0146 mol.
F) The number of moles of oxygen in the original sample is 0.813 g / 32 g/mol = 0.0254 mol.
G) The ratio of tin to oxygen in the original sample can be calculated by dividing the number of moles of tin and oxygen by the smallest of the two:
tin: 0.0146 mol / 0.0146 mol = 1
oxygen: 0.0254 mol / 0.0146 mol ≈ 1.74
We can round this to the nearest whole number, giving a ratio of 1:2. Therefore, the empirical formula of the original oxide of tin is SnO₂.
The mass of Cu (63.55 g/mol) used to create Cu2S was 36.25 grams. what theoretical mass of Cu2S (159.16 g/mol) can be produced? Report your answer with three significant figures.
if you take 5ml of this solution and dilute it too 150ml what is the concentration of the glucose in the resulting solution in micromoles
The concentration of the glucose in the resulting solution will contain[tex]33micromoles/L[/tex]
Glucose is a simple sugar molecule composed of 6 carbon atoms, 12 hydrogen atoms, and 6 oxygen atoms. The chemical formula for glucose is C6H12O6. Glucose is a monosaccharide, meaning it is a single-molecule sugar. It is the most important source of energy for living organisms and is found in many foods. Assuming that the initial solution contains 5 millimoles of glucose (5 mmol/L), the resulting solution will contain
[tex]{5 mmol}{150mL} \\= 0.033 mol/L \\= 33 micromoles/L.[/tex]
This can be expressed using the equation:
C1 V1 = C2 V2
Where C1 is the concentration of the original solution (5 mmol/L), V1 is the volume of the original solution (5 mL), C2 is the concentration of the resulting solution (33 micromoles/L) and V2 is the volume of the resulting solution (150 mL).
learn more about Glucose refer:brainly.com/question/28707372
#SPJ4
Which part of the economy is represented by box C on the circular flow model?
Box C in the circular flow model represents households, or consumers.
What does the circular flow model depict?In the circular flow model, households are shown as the source of spending and demand for goods and services in the economy.
The model depicts a continuous flow of money from households to firms, in exchange for goods and services, and then from firms back to households as wages and profits. Box C is typically depicted as one of two boxes on either side of the model, representing either households or firms. The other box, Box F, typically represents firms, or producers.
Therefore, the correct answer is as given above. It could then be concluded that the correct answer is that Box C in the circular flow model represents households, or consumers.
learn more about circular flow model: https://brainly.com/question/1433471
#SPJ1
what is the multiplicity of the methylene hydrogens indicatedi nthe proton nmr of the following compound
Calculate the percent by mass of the solute in the following solution: 4.10 g of toluene in 29.0 g of benzene.
The percent by mass of the solute (toluene) in the solution is 12.4%.
To calculate the percent by mass of the solute in a solution, you need to divide the mass of the solute by the mass of the entire solution and multiply by 100%.
In this case, the solute is 4.10 g of toluene, and the solvent is 29.0 g of benzene. Therefore, the mass of the entire solution is:
4.10 g (toluene) + 29.0 g (benzene) = 33.1 g
Now we can calculate the percent by mass of the solute:
(4.10 g / 33.1 g) x 100% = 12.4%
Therefore, the percent by mass of the solute (toluene) in the solution is 12.4%.
To know more about solute here
https://brainly.com/question/30620786
#SPJ4
which of the following macromolecules are characteristically water-insoluble?group of answer choicesproteinslipidscarbohydrates
The macromolecules that are characteristically water insoluble is the correct option is lipids.
The macromolecule are the molecule that are extraordinarily large. They may be organic materials such as the sugars and the natural fibers or the synthetic materials such as the plastics, the synthetic fibers, Lipids, the proteins, the nucleic, and carbohydrates . The lipids are water hating. They are water insoluble.
The lipids are the non polar compound and the water is the polar compound. The polar will dissolve the polar compounds and the non polar will dissolves the non polar compound. Therefore the lipids are insoluble in the water.
To learn more about lipids here
https://brainly.com/question/3498396
#SPJ4