Which of the following would be considered to be supersaturated if 40g of solute were dissolved at 60ºC?



​


a

KCl

b

KClO3

c

NaCl

(30 points)

The ions such as the cations found in seawater originally came from Earth's crust whereas the anions originated from Earth's mantle.

An ion is defined as an atom or a molecule which has a net electrical charge. There are 2 types of ions :1) cation 2) anion . The cation is the positively charged ion and anion is the negatively charged ion . As they are oppositely charged they attract each resulting in the formation of ionic bond.

Ions consisting of single atom are mono-atomic ions while which consists of two or more ions are called as poly-atomic ions . They are created by chemical interactions .

Learn more about ions,here:

https://brainly.com/question/1447156

#SPJ1

If the temperature is raised while maintaining a constant pressure of 100 atm, CO2 will transition from a solid to a liquid, then from a liquid to a supercritical fluid, and lastly to a gas. This is the fourth of four targets.

Heat energy will logically go from a warmer (body with a high temp) to the a cooler (body with a low temp) according to temperature (one at a lower temperature). How cold or hot something is can be expressed numerically using the physiological concept of temperature. A thermometer is used to determine temperature. Thermometers were calibrated using various temperature scales that historically specified unique reference points & thermometric materials.

It is measured in joules. Heat will therefore serve as a gauge for the flow or movement of energy. You must be aware of the fact that an object will receive or lose heat but not have heat if you want to comprehend the distinction between heat and temperature. It can therefore be referred to as a measure of change. The concepts of temperature and heat are very dissimilar. a thermometer with Farenheit and Celsius scales. The average molecular kinetic energy of a substance is measured by its temperature. The temperature of something is a statement about how quickly the molecules are moving within that object.

Target 1 of 4 is the phase shifts that happen when CO2 is heated from 190 K to 350 K at a constant pressure of 1 atm. It is known as sublimation when CO2 changes its phase at 1 atm from a solid (dry ice) to a gas (carbon dioxide vapor) without going through the liquid phase.

CO2 will experience a separate set of phase shifts when subjected to pressures greater than 1 atm. CO2 will change its state from a solid to a liquid at 5.1 atm constant pressure, and then from a liquid to a gas when the temperature rises. This is the second of four targets.

When the temperature is raised, CO2 will transition from a solid to a liquid at a constant pressure of 10 atm, and then from a liquid to a supercritical fluid. This is the third of four targets.

To know more about Temperature visit:

https://brainly.com/question/12165495

#SPJ4

The percent ionization for propionic acid in each of cases are given below:

Part A. 0.704%

Part B. 1.31%

Part C. 2.61 %

Percent ionization is defined as the quantity of a weak acid that ionizes in a solution expressed as a percentage.

Percent ionization can be calculated using the following expression.

α% = √(Ka/Ca) × 100%

where,

α% is the percent ionization.

Ka is the acid dissociation constant (1.34 × 10⁻⁵ for propionic acid).

Ca is the concentration of the acid.

For Part A. 0.250 M

α% = √(1.34 × 10⁻⁵/0.250) × 100% = 0.704%

Part B. 7.84 × 10⁻² M

α% = √(1.34 × 10⁻⁵/7.74 × 10⁻²) × 100% = 1.31 %

Part C. 1.97 × 10⁻² M

α% = √(1.34 × 10⁻⁵/2.03 × 10⁻²) × 100% = 2.61 %

Learn more about ionization from the link given below.

https://brainly.com/question/8907473

#SPJ4

The volume of the sodium chloride solution in the flask is 112.3 mL.

To find the volume of the sodium chloride solution in the Erlenmeyer flask, we first need to find the mass of the solution. We can do this by subtracting the mass of the empty flask from the mass of the filled flask:

Mass of solution = 428.6 g - 232.7 g = 195.9 g

Next, we can use the density of the solution to find the volume.

Density is defined as mass divided by volume, so we can rearrange the equation to solve for volume:

Volume = Mass / Density = 195.9 g / 1.744 g/mL = 112.3 mL

Finally, we can round our answer to one place after the decimal:

Volume = 112.3 mL ≈ 112.3 mL

So the volume of the sodium chloride solution in the flask is 112.3 mL.

To know more about volumes, refer here:

https://brainly.com/question/952755#

#SPJ11

Molecular polarity is important for life because it plays a crucial role in many biological processes.

Molecular polarity refers to the distribution of electrical charge within a molecule. It is a property that results from differences in the electronegativity of the atoms in a molecule.

Molecular polarity is important for life because many biological molecules, including proteins, DNA, and carbohydrates, are polar, meaning they have regions of positive and negative charge.

This allows them to interact with other polar molecules, such as water, through hydrogen bonding, which helps to stabilize their structures and maintain their functionalities.

More on molecular polarity can be found here: https://brainly.com/question/4248472

#SPJ1

The percent by mass of the solute (toluene) in the solution is 12.4%.

To calculate the percent by mass of the solute in a solution, you need to divide the mass of the solute by the mass of the entire solution and multiply by 100%.

In this case, the solute is 4.10 g of toluene, and the solvent is 29.0 g of benzene. Therefore, the mass of the entire solution is:

4.10 g (toluene) + 29.0 g (benzene) = 33.1 g

Now we can calculate the percent by mass of the solute:

(4.10 g / 33.1 g) x 100% = 12.4%

Therefore, the percent by mass of the solute (toluene) in the solution is 12.4%.

To know more about solute here

https://brainly.com/question/30620786

#SPJ4

The experimental procedure used to study how attention affects the processing of competing stimuli would be dichotic listening.

Dichotic listening is an experimental technique used to study selective attention in the auditory domain.

In a typical dichotic listening task, different sounds are presented simultaneously to both ears, with different stimuli presented to each ear. Participants are asked to attend to one ear (the "attended ear") and to ignore the other ear (the "unattended ear"), while listening to the sounds.

After the sounds have been presented, participants are typically asked to recall or identify the sounds presented to the attended ear. The task allows researchers to investigate the mechanisms underlying selective attention in the auditory system and to study factors that influence the selection and processing of auditory information.

More on dichotic listening can be found here: https://brainly.com/question/26815281

#SPJ1

The false statement concerning amino groups are nonpolar.

Nitrogen and hydrogen are the two components that make up an amino group. The chemical composition of an amino group is NH2. A single covalent link holds the N-H atoms in this functional group together.

Amines are substances and functional groups in chemistry that have a nitrogen atom that is basic and has a lone pair. Amines are technically ammonia derivatives in which one or more hydrogen atoms have been swapped out for a substituent, like an alkyl or aryl group.

A specific kind of functional group called an amino group is made up of one nitrogen and two hydrogens that are joined by a single covalent link. The chemical structure of the amino group is NH2.

Therefore, the correct answer is option D) They are nonpolar.

The complete question is;

Which of the following is a false statement concerning amino groups?

A) They are basic in pH.

B) They are found in amino acids.

C) They contain nitrogen.

D) They are nonpolar.

E) They are components of urea.

To learn more about amino groups refer to:

https://brainly.com/question/1302816

#SPJ4

The macromolecules that are characteristically water insoluble is the correct option is lipids.

The macromolecule are the molecule that are extraordinarily large. They may be organic materials such as the sugars and the natural fibers or the synthetic materials such as the  plastics, the synthetic fibers, Lipids, the proteins, the nucleic, and carbohydrates .  The lipids are water hating. They are water insoluble.

The lipids are the non polar compound and the water is the polar compound. The polar will dissolve the polar compounds and the non polar will dissolves the non polar compound. Therefore the lipids are insoluble in the water.

To learn more about lipids here

https://brainly.com/question/3498396

#SPJ4

Answer: A stove that circulates heated air to uniformly cook food is an example of convection heat transfer.

The appropriate values for the solution's molality and molarity are:

M is 1.20 M, while m is 1.22 M.

We must first determine how many moles of NaCl are present in the solution:

Moles of NaCl are equal to the mass of NaCl divided by its molar mass, which is 10.5 g/58.44 g/mol, or 0.180 mol.

We must divide the number of moles of NaCl by the litres of the solution's volume to determine its molarity:

Molarity (M) is equal to moles of NaCl per litre of solution.

1.20 M = 0.180 mol/0.150 L molarity (M)

We must divide the number of moles of NaCl by the kilogramme mass of the solvent (water) in order to determine the molality of the solution:

moles of NaCl/mass of solvent in kg molality (m) = 0.180 mol/0.147 kg 1.22 m mass of H2O = 147 g = 0.147 kg

Hence, the appropriate values for the solution's molality and molarity are:

M is 1.20 M, while m is 1.22 M.

Learn more about molarity here:

https://brainly.com/question/8732513

#SPJ4

The rate of a reaction depends upon the concentration of the reactants. If a compound is being consumed in a reaction, the rate constant for that compound decreases.

The rate constant or specific reaction rate of the reaction at a given temperature is defined as the rate of the reaction when the molar concentration of each of the reactants is unity.

The reaction rate is directly related to rate constant. The rate of a reaction decreases as the concentration of the reactants decreases with time. Here since the reactants are consumed, then the rate constant decreases.

Thus If a compound is being consumed, rate constant decreases.

To know more about rate constant, visit;

https://brainly.com/question/24658842

#SPJ1

Answer:

because it absorbs all colours expect for red,

Explanation: making the red light bounce into your eyes, therefore seeing the colour red

Question 2: The wave transfers its energy to the mineral, I think, thats my best guess

a) Reactants = 2NO, O₂ Products = 2NO₂ b) The balanced chemical equation is, 2NO + O₂ ---> 2NO₂. c) It is a combination reaction.

The Reactants in the reaction are 2NO, O₂ and products in the reaction is 2NO₂. The reaction is a combination reaction. Combination reactions can be exothermic or endothermic, depending on the specific reaction. Exothermic combination reactions release energy, usually in the form of heat or light, while endothermic combination reactions absorb energy.

The balanced chemical equation is, 2NO + O₂ ---> 2NO₂.

If we see the reaction 2NO + O₂ ---> 2NO₂ then we see that two molecules react and formed a single combined compound.

So it is combination reaction.

To know more about the combination reaction, here

brainly.com/question/3664113

#SPJ4

saturated liquid vapor aka liquid-vapor mixture. A mixture of saturated vapor and liquid is present in this condition. The dryness fraction, a parameter that describes the characteristics of water in this phase, must be calculated is combined with the saturation characteristics.

Vapor pressure is the pressure exerted by a vapor when it is in equilibrium with its liquid or solid phase at a given temperature. It is a measure of the tendency of a substance to evaporate and is a function of the temperature and the strength of the intermolecular forces between the molecules of the substance. At any given temperature, a substance will have a specific vapor pressure. When the vapor pressure of the substance is equal to the external pressure, the substance will begin to boil or evaporate. The vapor pressure of a substance increases with increasing temperature, as the average kinetic energy of the molecules increases and more molecules can escape from the liquid or solid phase and enter the gas phase.

To learn more about vapor pressure, click the link below ;

brainly.com/question/2693029

#SPJ4

A radioactive isotope, such as carbon-14, emits energy as rays and subatomic particles.

Radioactive isotopes, also known as radioisotopes, radionuclides, or radioactive nuclides, are any of several species of the same chemical element with different masses and unstable nuclei that work to dissipate excess energy by spontaneously emitting radiation in alpha, beta, and gamma forms .

More than 1,800 radioactive isotopes of various elements are known. Some of them are found in nature; the rest are produced artificially as direct products of nuclear reactions or indirectly as radioactive derivatives of these products.

There are several sources of radioactive isotopes. Some radioactive isotopes are present as terrestrial radiation. The radioactive isotopes radium, thorium, and uranium, for example, are found naturally in rocks and soil. Uranium and thorium also occur in small amounts in water. Radon, which is produced by the radioactive decay of radium, is abundant in the air.

Other radioactive isotopes are produced by humans in nuclear reactions, which produce unstable combinations of neutrons and protons. One way to artificially induce nuclear transmutation is by bombarding stable isotopes with alpha particles.

Your question is incomplete but most probably your full question was:

Select all that apply. A radioactive isotope (ex. carbon 14) emits energy as which of the

following?

-Rays

-subatomic particles

-Heat

-light

Learn more about Radioactive isotope at

https://brainly.com/question/1907960

#SPJ4

The concentration of the glucose in the resulting solution will contain[tex]33micromoles/L[/tex]

Glucose is a simple sugar molecule composed of 6 carbon atoms, 12 hydrogen atoms, and 6 oxygen atoms. The chemical formula for glucose is C6H12O6. Glucose is a monosaccharide, meaning it is a single-molecule sugar. It is the most important source of energy for living organisms and is found in many foods. Assuming that the initial solution contains 5 millimoles of glucose (5 mmol/L), the resulting solution will contain

[tex]{5 mmol}{150mL} \\= 0.033 mol/L \\= 33 micromoles/L.[/tex]

This can be expressed using the equation:

C1 V1 = C2 V2

Where C1 is the concentration of the original solution (5 mmol/L), V1 is the volume of the original solution (5 mL), C2 is the concentration of the resulting solution (33 micromoles/L) and V2 is the volume of the resulting solution (150 mL).

learn more about Glucose refer:brainly.com/question/28707372

#SPJ4

Answer:

the first one may be more complex so the second one will be simplified :)

Explanation:

The creation of dihydropyran Tetrahydrofurfuryl alcohol is converted into dihydropyran by reacting it with the arenesulfonic acid arso3h.

Here's the reaction mechanism for the synthesis of dihydropyran from tetrahydrofurfuryl alcohol and arylsulfonic acid:

First, the acid protonates the alcohol to make it a better leaving group:

OH-CH2CH2CH2CH2-OH + ArSO3H → OH2+-CH2CH2CH2CH2-OH + ArSO3-

The product is then deprotonated by a base, such as sodium methoxide, to form dihydropyran:

[OC(CH2)2-Ar]+SO3- + NaOCH3 → OC(CH2)2-Ar + NaSO4CH3-

Overall, the reaction can be represented as:

OH-CH2CH2CH2CH2-OH + ArSO3H → dihydropyran + NaSO4CH3-

Learn more about   movement of electrons here:

https://brainly.com/question/11905668

#SPJ4

Answer:

A) The molar mass of SnO₂ is 150.71 g/mol (118.71 g/mol for Sn and 32 g/mol for O). The mass percent of tin in SnO₂ is (118.71 g/mol / 150.71 g/mol) × 100% = 78.76%.

B) The mass of tin in the final sample is 2.842 g.

C) Let x be the mass of tin in the original sample. The mass of oxygen in the original sample is (2.540 g - x). Since tin is oxidized to SnO₂, we can write the equation: Sn + O₂ → SnO₂. The molar ratio of Sn to SnO₂ is 1:1, so the number of moles of Sn in the original sample is the same as the number of moles of SnO₂ in the final sample. Using this, we can set up the following equation:

x / 118.71 g/mol = 2.842 g / 150.71 g/mol

Solving for x, we get x = 1.727 g.

Therefore, the mass of tin in the original sample is 1.727 g, and the mass of oxygen in the original sample is (2.540 g - 1.727 g) = 0.813 g.

D) The mass of oxygen in the original sample is 0.813 g.

E) The number of moles of tin in the original sample is 1.727 g / 118.71 g/mol = 0.0146 mol.

F) The number of moles of oxygen in the original sample is 0.813 g / 32 g/mol = 0.0254 mol.

G) The ratio of tin to oxygen in the original sample can be calculated by dividing the number of moles of tin and oxygen by the smallest of the two:

tin: 0.0146 mol / 0.0146 mol = 1

oxygen: 0.0254 mol / 0.0146 mol ≈ 1.74

We can round this to the nearest whole number, giving a ratio of 1:2. Therefore, the empirical formula of the original oxide of tin is SnO₂.

Answer:

The pressure of the hydrogen in the container can be determined by using the equation:

P_H2 + ρgh = P_air

where P_H2 is the pressure of the hydrogen, ρ is the density of mercury (13,600 kg/m^3), g is the acceleration due to gravity (9.8 m/s^2), and h is the height difference between the mercury levels in the two arms of the manometer.

First, we need to convert the height difference from millimeters to meters:

h = 78.0 mm = 0.078 m

Next, we can substitute the given values into the equation:

P_H2 + (13,600 kg/m^3)(9.8 m/s^2)(0.078 m) = 100.7 kPa

Solving for P_H2, we get:

P_H2 = 100.7 kPa - (13,600 kg/m^3)(9.8 m/s^2)(0.078 m)

P_H2 = 99.0 kPa

Therefore, the pressure of the hydrogen in the container is 99.0 kPa

Kinetic Versus Thermodynamic Control Furthermore of HBr to Dienes: 1,2-and 1,4-Addition

In the present post we'll talk about 1,2-and 1,4-Addition to dienes - specifically, the expansion of solid corrosive like HBr.

When a diene goes through response with a solid corrosive like HBr, protonation brings about a reverberation settled carbocation

The reverberation settled carbocation can go through assault at two potential positions.

At the point when the response is led at low temperatures, the response is irreversible and the significant item will be the one with the least energy change state, which is the carbon best ready to balance out certain charge.

This is alluded to as running the response under kinetic control.

At the point when the response is directed at higher temperatures, the response is reversible and the significant item will be the one which is generally thermodynamically steady, which is by and large the most-subbed alkene.

This is alluded to as running the response under thermodynamic control.

to know more about thermodynamic click here:

https://brainly.com/question/13059309

#SPJ4

The stage that this most accurately describes while using the PCR is the initiation of DNA synthesis, also known as the denaturation stage.

In the denaturation stage of Polymerase Chain Reaction (PCR), the double-stranded DNA template is heated to a high temperature to separate the two complementary strands and create single-stranded DNA. The denaturation stage is the first step in the PCR cycle.

In this stage, the heat-stable DNA polymerase denatures the DNA and the primers anneal to the complementary single-stranded template. This marks the beginning of the extension stage, where the DNA polymerase synthesizes new complementary strands along the template DNA.

Learn more on denaturation stage here: https://brainly.com/question/27493294

#SPJ1

A line known as the Saturated Liquid Line can be used to connect the saturated liquid states on a T-V diagram, while the Saturated Vapor Line can be used to connect the saturated vapor states.

To learn more about Saturated Vapor Line, refer to:

https://brainly.com/question/18095323

#SPJ4

Box C in the circular flow model represents households, or consumers.

In the circular flow model, households are shown as the source of spending and demand for goods and services in the economy.

The model depicts a continuous flow of money from households to firms, in exchange for goods and services, and then from firms back to households as wages and profits. Box C is typically depicted as one of two boxes on either side of the model, representing either households or firms. The other box, Box F, typically represents firms, or producers.

Therefore, the correct answer is as given above. It could then be concluded that the correct answer is that Box C in the circular flow model represents households, or consumers.

learn more about circular flow model: https://brainly.com/question/1433471

#SPJ1

Answer: 21.90 grams HCl  ; 22 g HCl if need correct sig figs

Explanation:

moles = M X L  = 1.5 x .40 =0.60 moles HCl

convert to grams

0.60 X 36.5 = 21.90

The hilltops and the steepest point of a slope are found in the highest and most closely-spaced contour lines on the map.

Contour lines are lines on a map that connect points of equal elevation. Each contour line represents a specific elevation, and the spacing between contour lines represents the slope of the terrain.

The closer the contour lines are to each other, the steeper the slope. The hilltops are found where the contour lines form a closed circle or oval shape. The steepest point of a slope is found where the contour lines are closest together, indicating the highest rate of change in elevation.

Learn more about contour lines at: https://brainly.com/question/13088900

#SPJ1

The answer is approximately 1332.75 g of ice can be melted if 24.9 kJ of thermal energy are added at the freezing point.

Thermal energy refers to the energy contained within a system that is responsible for its temperature.

The heat required to melt a substance is equal to the enthalpy of fusion of that substance times its mass. The molar enthalpy of fusion of ice is 333.55 J/mol, so the amount of heat required to melt 1 mol of ice is 333.55 J.

To find the mass of ice that can be melted with 24.9 kJ of thermal energy, we first need to convert the energy from kJ to J:

24.9 kJ = 24.9 x 10^3 J = 24900 J

Next, we divide the amount of thermal energy by the molar enthalpy of fusion of ice to find the number of moles of ice that can be melted:

24900 J / 333.55 J/mol = 74.22 mol

Finally, we multiply the number of moles of ice by its molar mass to find the mass of ice in grams:

74.22 mol x 18.02 g/mol = 1332.75 g

Therefore, The answer is approximately 1332.75 g of ice can be melted if 24.9 kJ of thermal energy are added at the freezing point.

Learn more about thermal energy here: brainly.com/question/934320

#SPJ1