Explanation:
P1. V1/T1 = P2. V2/T2
Apply this
since here, P1 = P2
100 ml / 300 = V2/ 200
==> 100*200/300 = V2
===> V2 = 66.66 ml
carbondiooxide does not support in burning but mg burs in it why.?
To keep burning, fires require oxygen. Carbon dioxide is used in certain fire extinguishers to put out flames. Explanation: Because magnesium is higher on the reactivity scale than carbon, it is more reactive and eliminates oxygen from carbon dioxide (to give carbon and magnesium oxide).
how much usable energy is extracted from one glucose molecule
We can extract 3×3 power 3 from glucose molecules
PLEASE PEOPLE I NEED HELP PLEASE IF YOU SEE THIS HELP ME ! :,( !!!!! PLEASEEEEEEEEE
PLEASE NO LINKSSS !!!!! HELP ME THIS ITS FOR HOMEWORK PLEASE HELPP!
Answer:
year 1 is 5.5%
year 2 is 7.5%
year 3 is 10.2%
Explanation:
since,
length of the transect covered in seaweed / total lenth of transect x 100
then,
0.55 / 10.0 x 100 = 5.5
and
0.75 / 10.0 x 100 = 7.5
and
1.02 / 10.0 x 100 = 10.2
you could also just move the decimal to the right once
:)
nomenclature of this compound
Answer:
Nomenclature is the process of naming chemical compounds with different names so that they can be easily identified as separate chemicals. Inorganic compounds are compounds that do not deal with the formation of carbohydrates, or simply all other compounds that do not fit into the description of an organic compound.
Explanation:
what would u add if the soil is too basic~~ ?
Slaked lime is the ans
thank me later : p
Explain why the melting temperature of boron trichloride is much lower than that of sodium chloride
A sample of a certain gas has a volume of 452 mL at 711 mmHg and 26 degrees C. What would be the volume of this same sample of gas if it were measured at STP
The volume of this same sample of gas if it were measured at STP is 386.09mL
HOW TO CALCULATE VOLUME:
The new volume of a gas sample can be calculated using the following expression:
P1V1/T1 = P2V2/T2
Where;
P1 = initial pressureP2 = final pressureV1 = initial volumeV2 = final volumeT1 = initial temperatureT2 = final temperatureAccording to this question, a sample of a certain gas has a volume of 452 mL at 711 mmHg and 26°C (299K).
(711 × 452)/299 = 760 × V2/273
1074.82 = 2.78V2
V2 = 1074.82 ÷ 2.78
V2 = 386.09mL
Therefore, the volume of this same sample of gas if it were measured at STP is 386.09mL.
Learn more about volume at: https://brainly.com/question/754925?referrer=searchResults
the atomic number of four elements p,q,r,s are 6,8,10 and 12 respectively. the two elements which can bond ionically are:
Answer:
The atomic numbers of four elements A, B, C, and D are 6,8,10, and 12 respectively. The two elements which can react to form ionic bonds (or ionic compounds) are B (8= 2,6) and D (12 =2,8,2). So D donates its two electrons to B to fulfill their octet.
Explanation:
La superficie del sol se encuentra una temperatura de 6000 °C mientras que su núcleo tiene aproximadamente 10,000,000°C.
¿En qué parte del sol las partículas tendrán mayor velocidad?
¿Como será la velocidad de estas partículas comparada con las que están en una limonada a 5 °C?
¿que forma energía está relacionada con la velocidad en las partículas?
AYUDAAAA LO NECESITO YA
La energía cinética está relacionada con la velocidad de las partículas.
Sabemos que la velocidad de las moléculas de gas depende de la temperatura del cuerpo. La temperatura de un cuerpo es una medida de la energía cinética promedio de las moléculas del cuerpo.
Debemos notar que cuanto mayor es la temperatura del cuerpo, mayor es la velocidad de sus moléculas. Por lo tanto, a una temperatura de 10,000,000 ° C, las moléculas en el núcleo del sol tienen una velocidad mayor que las moléculas en la superficie del sol.
Todas las moléculas, ya sea en el núcleo o en la superficie del sol, se mueven a mayor velocidad que las moléculas de la limonada a una temperatura mucho más baja. La energía cinética está relacionada con la velocidad de las partículas.
Obtenga más información sobre la energía cinética: https://brainly.com/question/11067389
2. What do acidic solutions have high concentrations of?
Answer:
Explanation:
An acidic solution has a high concentration of hydrogen ions (H +start superscript, plus, end superscript), greater than that of pure wate
In a physical change, the makeup of matter is changed.
True or false?
Answer:
false
Explanation:
because it's just a physical change, the matter won't be changed.
Hope this might help you! I don't know if this is going to be right on everything, but it's a anwser
In a physical change, the makeup of matter is changed. This statement is false.
What do you mean by the term physical change ?
A physical change occurs when a substance experiences a change in its physical characteristics. A physical alteration may usually be reversed. No new material is produced with such a transformation.
As the substance's composition changes, a chemical reaction takes place. A chemical change happens when bonds are broken and new ones are created.
Physical change is a sort of change when the substance's chemical makeup does not change. Often, this type of alteration entails a change in the substance's size, form, and condition.
Thus, In a physical change, the makeup of matter is not changed because it's a physical change.
To learn more about the physical change, follow the link;
https://brainly.com/question/17931044
#SPJ5
YOU WOULD BE A LITERAL LIFESAVER IF U HELP ME. THANK YOUUUU
Answer:
160 g
Explanation:
5 x 32 = 160g, but if according to the periodic table u provided it would be 5 x 32.06
Answer:
160.3 g S
Explanation:
Why does a solid fill only part of a closed jar while the same mass of a gas fills the whole jar?
Answer:
because of atom don't put that as an answer
Explanation:
i need point to do finals
The different behavior of particles in solids and gases, including the intermolecular forces and kinetic energy, leads to solids filling only part of a closed jar while the same mass of a gas fills the whole jar. A solid fills only part of a closed jar, while the same mass of a gas fills the whole jar due to the differences in the behavior of particles in each state of matter.
1. Solid: In a solid, the particles are tightly packed and held in a fixed position. They have a definite shape and volume. The intermolecular forces between the particles are strong, preventing them from moving freely. As a result, solids occupy a specific amount of space within a container.
2. Gas: In a gas, the particles are spread out and move freely. They have no definite shape or volume. The intermolecular forces between the particles are weak, allowing them to move and fill the available space. As a result, gases can expand to fill the entire volume of a container.
When the same mass of a gas and a solid are placed in a closed jar, the gas particles have higher kinetic energy and are more mobile. They collide with each other and the walls of the container, exerting pressure and spreading out to occupy the entire space. Since the intermolecular forces are weak, the gas particles are not constrained by a fixed arrangement.
Learn more about Intermolecular Forces here:
https://brainly.com/question/12243368
#SPJ3
what does the heisenberg uncertainty principle state
Answer: It states that there is a fundamental limit to what one can know about a quantum system.
Explanation:
a terminal alkyne was treated with nanh2 followed by propyl iodide. the resulting internal alkyne was treated with ozone followed by water, giving only one type of carboxylic acid. provide a systematic, iupac name for the internal alkyne.
The systematic Iupac name for the internal alkyne is : 4-octyne
When only one type of carboxylic acid is made the internal alkyne will be symmetric and the compounds can be 3-hexane or 4-octyne but given that one of the reactants is propyl iodide. Therefore
The Internal alkyne will have an Iupac name 4-octyne
Hence we can conclude that the systematic Iupac name for the internal alkyne is 4-octyne
Learn more about 4-octyne : https://brainly.com/question/24355559
Which subatomic particles have a positive charge and are located in the nucleus?
a. neutrons
b. atoms
c. electrons
d. protons
Answer: protons
Explanation:
a) Neutrons are located in the nucleus but have a negative charge.
b) Atoms are not subatomic particles but are rather made of subatomic particles.
c) Electrons are subatomic particles with a negative charge that are located outside of the nucleus.
d) Protons are subatomic particles that are located in the nucleus and have a positive charge.
Determine the amplitude
or period as requested.
Period of y = 4sin 1/3x
a. 4
b. Pi/4
c. 4pi/3
d. 6pi
Answer:I found out that it is c
Explanation:Find an answer to your question Determine the amplitude or period as requested. Period of y = 4sin 1/3x a. 4 b. Pi/4 c. 4pi/3 d. 6pi.
Pls Help Me (20 Points)
In one to two sentences, describe an experiment that would show that intramolecular forces (attractions between atoms within molecules) are stronger than intermolecular forces (attractions between molecules).
Answer:
If the molecules have similar molar masses and similar types of intermolecular forces, look for the one that is the most polar or that has the most electronegative atoms or the most hydrogen bonding groups. That one will have the strongest IMF's overall.
Explanation:
An experiment that would show that intramolecular forces are stronger than intermolecular forces will be heating a block of ice in a sealed container then allowing it to change to steam.
Intramolecular forces are the forces of attraction that hold atoms together within a molecule. Intramolecular forces require a high amount of energy to splits atoms or molecules in a chemical bonding.
Intermolecular forces are weaker forces of attraction that occur between molecules. They require lesser energy to splits molecules compared to intramolecular forces.
An experiment that show that intramolecular forces are stronger than intermolecular forces will be heating a block of ice in a sealed container then allowing it to change to steam.
In the process, the energy required to change the state from ice to steam water is more than intermolecular forces.
Thus, we can conclude that this experiment shows that the intramolecular forces are stronger than the intermolecular forces.
Learn more:
https://brainly.com/question/14220340
I need help ASAP this is my final
Answer:
A
Explanation:
is the best answer...........
Please help me find the answer to this question
Answer:
A tumor
Explanation:
Answer:
It's Cancer
Explanation:
I did this before.
What chemical processes are involved in chemistry? I need 3+ chemical changes that occur during the chemistry process..
Answer:
Explanation:
Chemists categorize chemical changes into three main classes: inorganic chemical changes, organic chemical changes, and biochemical changes.
Burning of paper and log of wood.
Digestion of food.
Boiling an egg.
Chemical battery usage.
Electroplating a metal.
Baking a cake.
Milk going sour.
Various metabolic reactions that take place in the cells.
if you can’t already tell by the amount of questions i do not understand chemistry lol, giving brainliest
Answer:
Ok, so the process here is to convert the mass of H2 (hydrogen gas) to moles by dividing the mass by the molar mass of H2. Once you have the moles then you have to multiply by the STP (standard temperature and pressure) molar volume which should be 22.4.
Molar mass of H2 = (1.01)x2 = 2.02g/mol
19.3/2.02 = 9.55 moles
Now just multiply the moles by the molar volume
9.55 moles x 22.4 = 213.92 Litres of H2 are in 19.3g of H2
which two groups of the periodic table contain the most chemically reactive metals?
Answer:
group 3 and 12 alkali and alkaline earth metal
the process by which glucose is converted to starch is known as
Answer:
polymerization
Explanation:
Glucose is converted into starch by the process called polymerization. In polymerization, several simple and soluble molecules of glucose are put together to form a complex, insoluble molecule of starch.
Glucose is soluble , so it is converted to starch so that it can become insoluble and hence it cannot escape from cell , thus it can also be stored.
electric current is passed through water, it decomposes inti hydrogen and oxygen. write full balanced chemical equation for the reaction
Answer:
2H2O ------------------] 2H2 + O2
Question 1 of 11 The graph shows the change in temperature of a sample of water in a closed system as thermal energy is added over time. 150°C 100°C TELE Temperature (°C) 50°C 0°C -50°C 10 20 30 40 Time (min) 50 60 What happens in the water during changes of state? A. Its particles move at a lower speed B. Its particles maintain a constant speed. c. Its temperature varies constantly D. Its temperature increases slowly
Answer:
B. Its particles maintain a constant speed
Explanation:
Just did it :D
The graph shows the change in temperature of a sample of water in a closed system as thermal energy is added over time. 150°C 100°C Temperature (°C) 50°C 0°C -50°C 10 20 30 40 Time (min) 50 60 during changes of state water particles maintain a constant speed. Therefore, option B is correct.
What is thermal energy ?The term thermal energy is defined as the energy contained within a system that is responsible for its temperature.It is formed when the atoms and molecules in a substance vibrate faster due to a increase in temperature.
The examples of thermal energy sources are fossil fuels like natural gas, coal and oil, and solar heat, heat pump electric heat, and geothermal heat.
Thus, during changes of state water particles maintain a constant speed, option B is correct.
To learn more about the thermal energy, follow the link;
https://brainly.com/question/11278589
#SPJ2
1. Which of the following statements about the properties of elements related to an
atomic emission spectrum are true? Select all that apply. (3 are correct)
The emission spectrum of an atom consists of limited lines that are unique to a given element.
According to the Bohr model of the atom, energy is absorbed or emitted when an atom moves from one energy level to another. Since energy is quantized, the spectrum of atoms often consists of single lines.
Hence, the true statement about atomic spectrum is that; "the light that an element emits is made up of a limited number of narrow lines that produce a unique pattern or atomic emissions spectrum for that element."
Learn more about atomic spectrum: https://brainly.com/question/2049494
2.Photosynthesis and combustion of coal are two chemical reaction taking place.How can you describe both reactions on the basis of energy transfer?
either elements or compounds which are present prior to a chemical reaction
Answer:
Do you mean the reactants? They are present prior to the reaction taking place. The products are the results of the reaction.
Examples of errors in colorimetry experiments
Answer:
The lack of accuracy and underestimation of absorbance readings obtained from the colorimeter can be contributed to many experimental factors. One plausible error is from the imperfection of the absorber, in that it may not completely absorb the stray light passing by the perimeters of the photoresistor.
Explanation:
In practice there are other sources of error, such as environmental effects on photometer and sample, temperature, line voltage fluctuations, vibrations, contamination, or heating of the sample by the photometer. All these factors may impair the measured result, and ways and means are known to test and eliminate them.