Answers
Answer:
resonance frequency is the frequency when capacitive reactance and inductive reactance become equal and opposite to each other and all impedence is given by resistance.
Explanation:
f=1/2[tex]\pi[/tex][tex]\sqrt{LC}[/tex]
Related Questions
A herdsman yelling out to a fellow herdsman heard his voice reflected by a cliff 4s later.What is
the velocity of sound in air if the cliff is 680m away
Answers
Answer:
v = 340 m/s
Explanation:
Given that,
A herdsman yelling out to a fellow herdsman heard his voice reflected by a cliff 4s later.
The cliff is 680 m away
We need to find the velocity of sound in air.
Velocity = distance/time
Distance = 2 × 680 = 1360 m
[tex]v=\dfrac{1360\ m}{4\ s}\\\\=340\ m/s[/tex]
So, the velocity of sound in air is 340 m/s.
Ishan is testing materials to see whether they will stick to a magnet. How can
he use his imagination in this experiment?
OA. To think of different materials to test
OB. To carefully record the results in a chart
O C. To do the test the same way each time
O D. To remember which materials are magnetic
Answers
Answer:
The Answer is A "To think of different materials to test"
Explanation:
APE X
What is meant by the statement,the linear expansivity of copper is 0.000017k
Answers
Answer:
The change in length per unit length per degree rise in temperature of copper is 0.000017k
Explanation:
Given that :
The linear expansivity of copper is 0.000017k. This simply means that ; for a given copper length, the length of such copper will increase by 0.000017k for every degree rose in temperature of the copper rod.
Therefore, the change in length per unit length per degree rise in temperature (k) is 0.000017
what type of plate boundary decreases the amount of the Earth's crust?
Answers
Answer:
Convergent.
Explanation:
Just as oceanic crust is formed at mid-ocean ridges, it is destroyed in subduction zones. Subduction is the important geologic process in which a tectonic plate made of dense lithospheric material melts or falls below a plate made of less-dense lithosphere at a convergent plate boundary.
The wavelength of a water wave is 54 m. It has a frequency of 0.03 Hz. What is the velocity of the wave?
Answers
Answer:
1.62 m/s
Explanation:
Wavelength of the water wave= 54 m
The frequency is 0.03 Hz
Therefore the velocity can be calculated as follows
Velocity= frequency × wavelength
= 0.03 × 54
= 1.62 m/s
The reason why you should always exercise your abdominal during an exercise session is :
(A) because you will be fully warmed up
(B) you can focus on this muscle better
(C) because is the abdominal muscle is needed in all exercises during a workout
(D) because most people do it that way
(E) it does not really matter if you exercise the abdominal first or last
Answers
A ball weighing 60 N is swinging like a pendulum at the end of a 6.0 m rope. As the ball swings through its lowest point, its speed is measured at 5.0 m/s. What is the tension in the rope at this point?
A. 58.6 N
B. 85.4 N
C. 90.2 N
D. 97.3 N
Answers
Answer:
B. 85.4 N
Explanation:
The tension in the rope at the lowest point of the motion of the ball is antiparallel to the weight of the ball. By Newton's laws we construct the following equation of equilibrium:
[tex]\Sigma F = T - W = \left(\frac{W}{g} \right)\cdot \frac{v^{2}}{L}[/tex] (1)
Where:
[tex]T[/tex] - Tension in the rope, measured in newtons.
[tex]W[/tex] - Weight, measured in newtons.
[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.
[tex]v[/tex] - Speed of the ball, measured in meters per second.
[tex]L[/tex] - Length of the rope, measured in meters.
If we know that [tex]W = 60\,N[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]v = 5\,\frac{m}{s}[/tex] and [tex]L = 6\,m[/tex], then the tension in the rope at this point is:
[tex]T = W+\frac{W\cdot v^{2}}{g\cdot L}[/tex]
[tex]T = W\cdot \left(1+\frac{v^{2}}{g\cdot L} \right)[/tex]
[tex]T = (60\,N)\cdot \left[1+\frac{\left(5\,\frac{m}{s} \right)^{2}}{\left(9.807\,\frac{m}{s^{2}} \right)\cdot (6\,m)} \right][/tex]
[tex]T = 85.492\,N[/tex]
Hence, the correct answer is B.
A child of mass m is at the edge of a merry-go-round of diameter d. When the merry-go-round is rotating with angular acceleration α, the torque on the child is τ. The child moves to a position half way between the center and edge of the merry-go-round, and the angular acceleration increases to 2α. The torque on the child is now
Answers
Answer:
The torque on the child is now the same, τ.
Explanation:
It can be showed that the external torque applied by a net force on a rigid body, is equal to the product of the moment of inertia of the body with respect to the axis of rotation, times the angular acceleration.In this case, as the movement of the child doesn't create an external torque, the torque must remain the same.The moment of inertia is the sum of the moment of inertia of the merry-go-round (the same that for a solid disk) plus the product of the mass of the child times the square of the distance to the center.When the child is standing at the edge of the merry-go-round, the moment of inertia is as follows:[tex]I_{to} = I_{d} + m*r^{2} = m*\frac{r^{2}}{2} + m*r^{2} = \frac{3}{2}* m*r^{2} (1)[/tex]
So, τ = 3/2*m*r²*α (2)When the child moves to a position half way between the center and the edge of the merry-go-round, the moment of inertia of the child decreases, as the distance to the center is less than before, as follows:[tex]I_{t} = I_{d} + m*\frac{r^{2}}{4} = m*\frac{r^{2}}{2} + m*\frac{r^{2}}{4} = \frac{3}{4}* m*r^{2} (3)[/tex]
Since the angular acceleration increases from α to 2*α, we can write the torque expression as follows:τ = 3/4*m*r² * (2α) = 3/2*m*r²
same result than in (2), so the torque remains the same.
A car is moving at 25.5 m/s when it accelerates at 1.94 m/s^2 for 2.3 s. What is the car's final speed? (Keep in mind direction and round to 2 decimals)
Answers
Answer:
29.96m/s
Explanation:
Given parameters:
Initial speed = 25.5m/s
Acceleration = 1.94m/s²
Time = 2.3s
Unknown:
Final speed of the car = ?
Solution:
To solve this problem, we are going to apply the right motion equation:
v = u + at
v is the final speed
u is the initial speed
a is the acceleration
t is the time taken
Now insert the parameters and solve;
v = 25.5 + (1.94 x 2.3) = 29.96m/s
the surface of objects in contact are not completely smooth true or false
Answers
Answer:
true objects in contact are not completely smooth
What is the centripetal force necessary to keep a 0.4 kg object rotating in a circular path
of radius 3m?
Answers
Answer:
ertdhrsg
Explanation:
gesrgsg
Objects in free fall are weightless.
Please select the best answer from the choices provided
T
F
Answers
Answer:
[tex]\boxed{True}[/tex]
Explanation:
Objects are weightless in free fall because their is no other force pushing them rather than the gravitational force.
Hope it helps!<3
Answer:
It's ture hope this answer help have a great day .!Explanation:
If the body is at rest while I am pushing it with a force of 20 Newtons and the force of static friction is 20 Newtons, will it move or should I push with a force greater than 20
Answers
Answer:
It will not move, so you should push with a force greater than 20 N.
Explanation:
Static friction is a force that keeps a body at rest. This means static friction will be the force that keeps the body from moving when there is no push or pull hence you should overcome it with enough opposing force for the body to move.
In this case for the body to move , you should push with a force greater than 20 N for it to move.
Multiply.
(2x + 4)(x - 4)
Answers
Answer:
(2x + 4)(x - 4)=2x^2-4x-16
A ray moving in water at 55.5 deg
enters plastic, where it bends to
48.7 deg. What is the index of
refraction for the plastic?
( water n = 1.33, Air n = 1.00 )
Answers
Answer:
Refractive index of the plastic = 1.46
Explanation:
By Snell's law,
[tex]\frac{\text{sin}\theta _{2} }{\text{sin}\theta _{1}}=\frac{n_1}{n_2}[/tex]
Here, [tex]\theta _1[/tex] = Angle of incidence in medium 1 (Plastic)
[tex]\theta_2[/tex] = Angle of refraction in medium 2 (Water)
[tex]n_1[/tex] = Refractive index of medium 1 (Plastic)
[tex]n_2[/tex] = Refractive index of medium 2 (Water)
By substituting values in the formula,
[tex]\frac{\text{sin}(48.7)}{\text{sin}(55.5)}=\frac{1.33}{n_2}[/tex]
[tex]n_2=\frac{1.33\times \text{sin}(55.5)}{\text{sin}(48.7)}[/tex]
= 1.46
Therefore, refractive index of the plastic = 1.46
Which best describes the law of conservation of mass?
O The coefficients in front of the chemicals in the reactants should be based on the physical state of the products,
O Products in the form of gases are not considered a part of the total mass change from reactants to products
O When reactants contain both a solid and a liquid, the solid counts toward the overall mass and the liquid does not
O The mass of the reactants and products is equal and is not dependent on the physical state of the substances.
Answers
Explanation:
The law of conservation of mass states that mass in an isolated system is neither created nor destroyed by chemical reactions or physical transformations. According to the law of conservation of mass, the mass of the products in a chemical reaction must equal the mass of the reactants.
A race car starts from rest and accelerates down a track at a rate of 3.0 m/s2
How fast is the car moving after 10 seconds?
Answers
30 m/s
Explanation:We are given:
Initial Velocity (u) = 0 m/s
Acceleration of the Car (a) = 3 m/s²
Time Interval (t) = 10 seconds
Speed of the Car After 10 seconds:
From the First equation of motion:
v = u + at
replacing the given values
v = 0 + (3)(10)
v = 30 m/s
Hence, the car is moving at a velocity of 30 m/s after 10 seconds
A person pushing a bin with 45 N of force slides the 3 kg plastic bin on a rough surface with friction. The plastic bin is moving with a constant velocity. What is the net force acting on the box?
Answers
Answer:
F = 0
Explanation:
Given that,
Force acting to push a bin = 45 N
Mass of the plastic bin, m = 3 kg
The plastic bin is moving with a constant velocity.
We need to find the net force acting on the box. Constant velocity means the change in velocity is equal to 0. It means acceleration will be 0.
As a result, the force acting on the box is equal to 0.
The image shows a diagram explaining a concept.
Which concept does the diagram show?
A. tempature
B. Altitude
C. air density
D. air pressure
Answers
Answer:
D.
Explanation
Air pressure.
Answer:air pressure
Explanation:
Need help ASAP plz and thank you!!
Answers
Answer: Possibly b
Explanation:
How long( in hours, will it take for 500 000 C of charge to flow through a diode if it requires
0.05 Amp to operate it.
Answers
Answer:
277.78 hours
Explanation:
The formula for calculating the amount of charge is expressed as;
Q = It
I is the current
t is the time
Given
I =0.05A
Q = 50,000C
Required
Time t
Recall that: Q = It
t = Q/I
t = 50,000/0.05
t = 1,000,000secs
Convert to hours
1,000,000secs = 1,000,000/3600
1,000,000secs = 277.78 hours
Hence it will take 277.78 hours for the charge to flow through the diode
Give reason:
a) In 'coin on card' experiment a smooth card is used.
Answers
Answer:
Please mark as brainliest!!
Explanation:
In coin card experiment smooth card is used so that the card can slide easily from glass.
Answer:
In coin card experiment smooth card is used so that the card can slide easily from glass.
(kg)
The table shows the relationship between the masses of two objects, the distance between the
two objects, and the gravitational force between the objects
Mass
of Object 1 Mass of Object 2 Distance between Gravitational
(kg)
Objects 1 and 2 Force between
(m)
Objects 1 and 2
(N)
1
16
2G
2
1 G
3
3
9 G
9
3
3
3G
1
2
1
6. Which conclusion is supported by the data in the table? (1 point)
An increase in the mass of an object causes the same decrease in the gravitational force
An increase in the distance between the objects causes the same decrease in the gravitational force
An increase in the distance between the objects causes a greater change in the gravitational force than the same increase in mass.
An increase in the mass causes a greater change in the gravitational force than the same increase in the distance between the objects
Answers
Answer:
(C) an increase in tue distance between the ibject causes a greater change in the gravitational force than the same increase in mass
Hope this helps
Answer:
C: An increase in the distance between the objects causes a greater change in the gravitational force than the same increase in mass.
Explanation:
it's C on edge! hope this helps!!~ (❁´▽`❁)*✲ﾟ*
What's a Weber?
in electromagnetism
Answers
Answer:
In physics, the weber is the SI derived unit of magnetic flux. A flux density of one Wb/m2 (one weber per square metre) is one tesla.
Hope it helps !
Answer:
Weber unit of magnetic flux in the international system of units (SI), defined as the amount flux that, linking an electrical circuit of one turn (one loop of wire) , produces in it an electromotive force of one volt as the flux is reduced to zero as a uniform rate in one second .
it was named in honour of the 19th century German physicist Wilhelm Eduard Weber
an electric iron draws a current of 5a when connected to a 250v supply. calculate the energy used buy the iron if it's used for 10 minutes
Answers
Answer:
The energy used by the iron is 0.2083 KWH.
Explanation:
Electric Energy
The energy consumed by an electrical appliance is given by:
E = P.t
Where:
P = Power consumed
t = Time the appliance is connected to the power supply
The power can be calculated as a function of the voltage V and the current I:
P = V.I
Therefore, the energy is:
E = V.I.t
The electric iron draws a current of I=5 A when connected to a V=250 V supply for t=10 minutes. The time must be expressed in hours, thus t=10/60=0.167 hours.
Thus, the energy is:
E = 250 V * 5 A * 0.167 H
E = 208.33 WH
Converting to KWH:
E = 208.33/1000 = 0.2083 KWH
The energy used by the iron is 0.2083 KWH
two spheres A and B are projected off the edge of a 1.0 m high table with the same horizontal velocity . sphere A has a mass of 20.g and sphere B has a mass of 10.g.
If both spheres leave the edge of the table at the same instant, sphere A will land
a. at some time after sphere B.
b. at the same time as sphere B.
c. at some time before sphere B.
d. There is not enough information to decide.
Answers
Answer:
A lands first becuase its heavier
which is NOT true of the Big Bang Theory?
1. it explains what’s happening in the universe now
2. it explains what caused the big bang.
3. it explains what the universe was like in the beginning
4. it stages that the universe is expanding
Answers
Answer:
1. it explains what's happening im the universe now
Based on its location on the periodic table, which metal is likely to be less reactive than both strontium and sodium?
magnesium (Mg)
barium (Ba)
cesium (Cs)
rubidium (Rb)
Answers
Answer:
Magnesium is the correct answer
Explanation:
It is magnesium because as we move down the periodic table group, atomic sizes increase which is as a result of lesser forces of attraction between nucleus and valence of an atom which makes the atom to be prone to leave as electrons so easily, elements become more reactive.
But as we move along the period , atomic sizes decrease because there is a more force of attraction between nucleus of an atom and it valence electrons making it less reactive just as the case in magnesium. Other elements are more reactive than it across the group.
Answer:
Magnesium
Explanation: Correct on edge!
Hope this Helps! :)
Using the law of conservation of energy, what is the kinetic energy at e?
Answers
Answer:
Send the pic so I can see
what are the very small particles that make up matter
Answers
Hope this helps!!
Answer:
The very small particles that make up matter are I) Atoms
Matter - Anything that have mass and occupies space is called matter . it is made up of atoms and molecules
Atoms - The smallest part of matter is called atom.
Molecule - Group of atoms combine together to form a molecule.
More to know - Atom is made up of even smaller particles called neutron, proton and electron. Electron moves around nucleus ( nucleus is made up of neutron and proton) Different types of atom combine and form molecule ( Nitrogen dioxide No2 has 1 atom of nitrogen and 2 atoms of oxygen)