Answer:
The car's average speed is 70.8 mph
Explanation:
The given parameters are;
The total distance traveled = 885 miles
The time of travel = 12.5 hours
The average speed is given by the following equation;
[tex]Average \ speed = \dfrac{Total \ Distance \ traveled}{Total \ time \ taken \ to \ travel \ the \ distance}[/tex]
Therefore, we have;
[tex]Average \ speed = \dfrac{885 \ miles}{12.5 \ hours} = 70.8 \ miles \ per \ hour[/tex]
Therefore, the car's average speed = 70.8 mph.
Answer:
The car's average speed is 70.8 mph
Explanation:
A 1500 kg car has an applied forward force of 5000 N and experiences an air resistance of 1250 N. What is the car's acceleration?
Answer:
[tex]2.33\ m/s^2[/tex]
Explanation:
Net Force
According to the second Newton's law, the net force exerted by an external agent on an object of mass m is:
Fn = m.a
Where a is the acceleration of the object. The net force is the sum of the individual vector forces applied to the object.
The m=1500 Kg car has two horizontal forces applied: the forward force of 5000 N that causes the movement and the air resistance force of 1250 N that opposes motion.
The net force is Fn = 5000 N - 1500 N = 3500 N
To find the acceleration, we solve the equation for a:
[tex]\displaystyle a=\frac{Fn}{m}[/tex]
[tex]\displaystyle a=\frac{3500}{1500}[/tex]
[tex]\boxed{a = 2.33\ m/s^2}[/tex]
The car's acceleration is [tex]a = 2.33\ m/s^2[/tex]
Solve for x. 60(cos 50) = x
Answer:
x=38.56725658
Explanation:
Answer:
x=38.56725658
Explanation:
In her lab, Mrs. Smith is pulling a 28 N block across a surface with a constant speed. If
she must pull with a force of 4.0 N, what is the coefficient of sliding friction between the
block and the lab table?
Answer:
0.14 is the friction coefficient.
Explanation:
The equation for the friction coefficient is friction coefficient = force/normal force. The force is 4N, and the normal force is 28N. 4/28=0.14.
Please help me I swear will mark you brainiest
Answer:
B
Explanation:
I hope this helps!!! <3
Answer:
B.......
Explanation:
Hope this helped
State two devices that transfer heat out of a cool environment into a warm environment
Answer:
Heat pump
Refrigerators
Explanation:
Some devices like heat pump and refrigerators used transfers of thermal energy in a cool region to warm other region.
These types of devices used for transferring heat energy by thermal conduction method.
Cellular respiration occurs in the body 24 hours per day. During exercise, the rate of cellular respiration increases. Why does increased cellular respiration cause people to breathe faster?
More oxygen is needed to produce energy, and more carbon dioxide waste must be removed from the body.
More nutrients are needed to produce more energy, and more oxygen must be removed from the body.
More heat is generated by the body, and breathing cools the body quickly.
More water is lost from the body, and breathing hydrates the body.
Answer: I think is C
Explanation:
Answer: more oxygen is needed to produce energy
Calculate the mass of a planet that exerts a 1.5 X 10 13 N force on a 5.4 x 10
30
kg star
O 6.67 X 10 3 kg
O 1.07 X 10 15 kg
O 1.00 X 10 17 kg
O 1.30 X 10 45 kg
Answer:
umm I also need help sorry
Explanation:
help..
Answer:
1.07 X 10^15 kg
Explanation:
How much work is required to lift a 500 kg block 12 m? (Show work)
The required work done will be "6000 kg-m".
Work and energy:Work would be defined as an object's displacement whenever a force would be exerted to that as well, whereas energy is defined as the capacity to accomplish the work.
This then exists throughout a variety of forms, including potential, kinetic, biochemical, thermodynamic, nuclear, as well as direct current.
According to the question,
Mass, m = 500 kg
Distance, d = 12 m
We know the formula,
→ Work = Force x Distance
or,
→ W = F x D
By substituting the given values in the above formula, we get
= [tex]500\times 12[/tex]
= [tex]6000[/tex] kg-m
Thus the above answer is correct.
Find out more information about work done here:
https://brainly.com/question/25573309
A block and tackle consisting of 5 pulleys is used to raised a load of 400N through a height of 10m.If the work done against friction is 100j.
Calculate;
1)The work done by the effort
2)The efficiency of the system
3)The effort applied
Answer:
1) 4000Joules
2) 25%
3) 320N
Explanation:
A block and tackle consisting of 5 pulleys is used to raised a load of 400N through a height of 10m.If the work done against friction is 100j.
Calculate;
1)The work done by the effort
2)The efficiency of the system
3)The effort applied
1) Workdone by the effort is the work input = Load * distance moved by the Load
Workdone by the effort = 400 * 10
Workdone by the effort = 4000Joules
2) Efficiency = Work output/Work input * 100
Work output = work done against friction = 100 Joules
Efficiency = 100/4000 * 100
Efficiency = 10000/4000
Efficiency = 25%
Hence the Efficiency of the system is 25%
3) Using the efficiency formula:
efficiency = MA/VR * 100
Velocity ratio = 5
MA = Load/Effort
efficiency = (L/E)/5 * 100
25 = 400/E/5 * 100
25/100 = 400/5E
0.25 = 400/5E
0.25 * 5E = 400
1.25E = 400
E = 400/1.25
E = 320N
hence the effort applies is 320N
- During a certain period, the angular position of a rotating object is given by: = − + , where is in radian and t is in seconds. Determine the angular position, angular speed, and angular acceleration of the rotating object at = Sec.
The question is not complete. The complete question is :
During a certain period of time, the angular position of a rotating object is given by [tex]$\theta =2t^2 +10t+5$[/tex], where θ is in radians and t is in seconds. Determine the angular position, angular speed, and angular acceleration of the door (a) at t = 0.00 seconds, (b) at t = 3.00 seconds.
Solution :
Given :
Displacement or angular position of the object, [tex]$\theta =2t^2 +10t+5$[/tex]
∴ Angular speed is [tex]$\omega = \frac{d \theta}{dt}$[/tex]
ω = 10 + 4t
And angular acceleration is [tex]$\alpha = \frac{d \omega}{dt}$[/tex]
α = 4
a). At time, t = 0.00 seconds :
Angular displacement is [tex]$\theta =2t^2 +10t+5$[/tex]
[tex]$\theta =2(0)^2 +10(0)+5$[/tex]
= 5 rad
Angular speed is ω = 10 + 4t
ω = 10 + 4(0)
= 10 rad/s
Angular acceleration is α = 4 [tex]$rad/s^2$[/tex]
b). At time, t = 3.00 seconds :
Angular displacement is [tex]$\theta =2t^2 +10t+5$[/tex]
[tex]$\theta =2(3)^2 +10(3)+5$[/tex]
= 53 rad
Angular speed is ω = 10 + 4t
ω = 10 + 4(3)
= 22 rad/s
Angular acceleration is α = 4 [tex]$rad/s^2$[/tex]
here avarose566 you need this
Answer:
ooooooooooooooooo
Explanation:
*makes holy water*
Two soccer players run toward each other. One player has a mass of 85 kg
and runs west with a speed of 8 m/s, while the other has a mass of 105 kg
and runs east with a speed of 7 m/s. What is the total momentum of the
system made up of the two players?
Answer:
Total momentum, p = 55 kg-m/s
It is given that,
Mass of player 1, m₁ = 85 kg
Mass of player 2, m₂ = 105 kg
Speed of player 1, v₁ = -8 m/s (west)
Speed of player 2, v₂ = 7 m/s (east)
Momentum is equal to the product of mass and velocity. For this system, momentum is given by :
p=m_1v_1+m_2v_2p=m
1
v
1
+m
2
v
2
p=85\ kg\times (-8\ m/s)+105\ kg\times 7\ m/sp=85 kg×(−8 m/s)+105 kg×7 m/s
p = 55 kg-m/s
The total momentum of the system made up of the two players is 55 kg-m/s.
Answer:
p = 55 kg * m/s east
Explanation:
The answer above explains it neatly, but leaves the direction out of the answer. The player heading east has more momentum, so the net momentum of the system is east.
Beth moves a 15 N book 20 meters in 10 seconds. How much power was produced?
Answer:
30 Watts
Explanation:
Power = Work/Time
Work = Force*Distance
Power = Force * Distance / Time
Power = 15 N * 20 meters / 10 sec
Power = 30 Watts
An airplane cruising at a constant velocity and altitude. Which of the following diagrams best represents the four forces of the airplane?
Answer:
You need to put the diagrams. repost and include the diagrams
A body moving in a straight line has a uniform motion if it travels ---------- distance in -------- intervals og time
Answer:
uniform an uniform
please fill it like yhis
liquids that do not mix form into layers when they have_ densities
Answer:
different
Explanation:
When an object moves, where does the energy come from?
Answer:
Kinetic energy.
Explanation:
This is the energy of motion, observable as the movement of an object or subatomic particle. Every moving object and particle have kinetic energy.
I WILL GIVE U 100 POINTS IF U ANSWER THIS AND GET IT RIGHT!!!!!!!!!!!!!!
Answer:
Free points That's awesome Thanks Brainly User!
Explanation:
How do bubbles support the atomic theory?
A. The bubbles are lighter than air.
B. There is matter that cannot be seen inside the bubbles.
C. The bubbles will burst before long.
D. The bubbles cannot be broken into smaller pieces.
Answer:
The answer is probably B or C
Option B supports the atomic theory. Thus, this option is correct.
Atomic theory is the theory which states that matter is composed of particles called atoms. It tells us that all the matters are made of very tiny particles called atoms and all atoms of the same kind have the same size in any object.
Let's look at all the options given,
A-The bubbles are lighter than air- The bubble consists of water and air thus they are not lighter than air. This statement does not tell anything about the atomic theory. Hence this option is not correct.B. There is a matter that cannot be seen inside the bubbles-The bubble is made up of two kinds of atoms one is oxygen and another is hydrogen. When we feel air into a soap bubble solution molecules want to attract to each other again so they wrap around the burst of air to attach to each other again. These atoms cannot be seen inside the bubbles but this option support the atomic theory. Thus, this option is correct.C. The bubbles will burst before long-In the bubble there is water. When this water loss in some way the bubble pops up. This water can be lost when it comes to contact with dry fingers or objects. It can be burst when the atmosphere is very dry. All the atoms are attracted towards. D. The bubbles cannot be broken into smaller pieces-This option does not support the atomic theory thus this is not the correct option.
Hence the option B supports the atomic theory. Thus, this option is correct.
For more about the atoms follow the link below-
https://brainly.com/question/13981855
PLZ HELP I DONT GET IT
A sealed can of your favorite soda has a carbon dioxide gas (CO2) volume of 0.05 L. When it is refrigerated, the pressure is 207 kPa. When you open it, the pressure drops to 101 kPa. After opening, what will the new volume of the carbon dioxide gas be?
Answer:
0.1 L
Explanation:
From the question given above, we obtained the following data:
Initial volume (V₁) = 0.05 L
Initial Pressure (P₁) = 207 KPa
Final pressure (P₂) = 101 KPa
Final volume (V₂) =?
We can obtain the new volume (i.e the final volume) of the gas by using the Boyle's law equation as illustrated below:
P₁V₁ = P₂V₂
207 × 0.05 = 101 × V₂
10.35 = 101 × V₂
Divide both side by 101
V₂ = 10.35 / 101
V₂ = 0.1 L
Thus, the new volume of the gas is 0.1 L
plzzzz help me will mark u brainiest
Answer:
D
Explanation:
An object is falling from a height of d and reaches a final velocity of vf. Calculate velocity when the object has fallen a distance d/2.
Answer:
The final velocity, [tex]v_{f}[/tex], is gd.
Explanation:
The condition here is a free falling object. Thus from the third equation of motion under free fall, we have;
[tex]v_{f}[/tex] = [tex]v_{i}[/tex] + 2gs
where [tex]v_{f}[/tex] is the final velocity of the object, [tex]v_{i}[/tex] is the initial velocity of the object, g is the gravitational force and s is the height.
Since the object falls from a height of d, then [tex]v_{i}[/tex] = 0 m/s, and s = d.
So that;
[tex]v_{f}[/tex] = 0 + 2gd
= 2gd
[tex]v_{f}[/tex] = 2gd
When the distance is [tex]\frac{d}{2}[/tex], [tex]v_{i}[/tex] = 0 m/s.
Then;
[tex]v_{f}[/tex] = 2g[tex]\frac{d}{2}[/tex]
[tex]v_{f}[/tex] = g x d
When the object falls through the height [tex]\frac{d}{2}[/tex], then the final velocity is gd.
quit my nose so you have a bad guy really good guy
Answer:
hmmmmmmmmmmmmmmm
yes.
Yuna is writing an opinion piece about her Schools lunch menu which text structure would best Express her ideas check all that apply
Answer:
Cause and effect, problem and solution, order of importance, comparison and contrast.
Explanation:
A hollow tennis ball and a solid steel ball of the same diameter are dropped at the same time. Which ball has the greater force acting on it
Answer:
the solid steel ball...more mass more weight more gravity
Explanation:
Answer:
Solid steel ball. It has more mass therefore more force will be acting on it.
Explanation:
If it requires E joules of energy to raise a mass from the surface of the Earth to an altitude of 6,000 km above the Earth, how much energy is required to raise it from the surface to an altitude of 12,000 km?
Answer:
To raise the mass to an altitude of 12,000 Km 2E joules are required.
Explanation:
Gravitational Potential Energy
It's the energy stored in an object because of its vertical position or height in a gravitational field.
It can be calculated with the equation:
U=m.g.h
Where:
m = mass of the object
h = height with respect to a fixed reference
g = acceleration of gravity, or [tex]9.8 m/s^2[/tex].
If a mass has a height h1, its potential energy is
[tex]U_1=m.g.h_1[/tex]
If a mass has a height h2, its potential energy is
[tex]U_2=m.g.h_2[/tex]
The ratio of both potential energies is:
[tex]\displaystyle \frac{U_2}{U_1}=\frac{m.g.h_2}{m.g.h_1}[/tex]
Simplifying:
[tex]\displaystyle \frac{U_2}{U_1}=\frac{h_2}{h_1}[/tex]
Solving for U2:
[tex]\displaystyle U_2=U_1.\frac{h_2}{h_1}[/tex]
Since U1=E:
[tex]\displaystyle U_2=E.\frac{12,000~Km}{6,000~Km}[/tex]
[tex]U_2 = 2E[/tex]
To raise the mass to an altitude of 12,000 Km 2E joules are required.
A pinball bangs against a bumper of a pinball machine with a speed of 0.46 m/s. If the ball has a mass of 0.058 kg, what is the ball's kinetic energy?
Answer:
either its 12 or 0.402
Explanation:
Queremos un cilindro de simple efecto que utilice en su funcionamiento un volumen de aire a presión atmosférica de 13,122 litros, cuya presión de trabajo sea de 8,5Kgf/ cm2 y cuya longitud sea de 20 cm. -hallar el diámetro de este cilindro. - calcular las fuerzas de este cilindro.
Answer:
1) El diámetro es de aproximadamente 913,987 cm.
2) La fuerza del cilindro es 5576850 kgf
Explanation:
1) Los parámetros dados son;
El volumen del aire = 13,122 litros = 13122000 cm³
La presión de trabajo = 8.5 kgf / cm²
La longitud del cilindro = 20 cm.
Por lo tanto, tenemos;
El área de la base del cilindro = π · r² = 13122000 cm³ / (20 cm) = 656100 cm²
r = √ (656100 / π) ≈ 456,994 cm
El diámetro = 2 × r ≈ 2 × 456.994 ≈ 913.987 cm
El diámetro ≈ 913,987 cm
2) La fuerza del cilindro = El área de la base del cilindro × La presión de trabajo
∴ La fuerza del cilindro = 656100 cm² × 8.5 kgf / cm² = 5576850 kgf
La fuerza del cilindro = 5576850 kgf
A 10kg box is sliding at 50m/s. Find the momentum
Answer:
The momentum of the ball is 500 kg·m/s
Explanation:
The momentum is given by Mass × Velocity
The given parameters are;
The mass of the box = 10 kg
The velocity by which the box is sliding = 50 m/s
Therefore, the momentum of the ball is given as follows;
The momentum of the ball = 10 kg × 50 m/s = 500 kg·m/s
The momentum of the ball = 500 kg·m/s
please help! i'll give brainliest.
what is it called when a magnet causes the atoms in a non-magnetic metal to line up and act like a magnet?
a: oriented magnet
b: permanent magnet
c: non-magnet
d: induced magnet
Answer:
I think It's induced magnet
Explanation:
Because a magnet and non magnet can be chicken nuggets
If a magnet causes the atoms in a non-magnetic metal to line up and act like a magnet, the non magnet is said to be an induced magnet by the magnetic induction by a permanent magnet.
What is magnetic induction ?A permanent magnet is made of ferromagnetic materials which are having permanent magnetic properties. The magnetic field lines from permanent magnet always align with an applied magnet.
As in the case of dipole molecules capable of inducing a polarity to a nonpolar molecule, a magnetic field by a strong magnet can induce a magnetic property to a nonmagnet.
The induced magnetic field only reside in the object as long as the induction source is there. For example the a rotating electric filed causes magnetic moment in a nonmagnet.
Find more on magnetic induction:
https://brainly.com/question/18575018
#SPJ5